- Видео 53
- Просмотров 214 157
Noah
Новая Зеландия
Добавлен 27 фев 2015
If you subscribe, my friend, I might give you ten cents.
Review of the FM01 T65 Soldering Iron
I bought this soldering iron on aliexpress for dirt cheap and thought it was really good so I decided to make a quick review on it showing you all the functions I hope you enjoy.
Please support me by liking and subscribing
Please support me by liking and subscribing
Просмотров: 402
Видео
CRAZY! Hack Xiaomi mi 3 Scooter 58 KPH!!
Просмотров 35 тыс.9 месяцев назад
If you own a Xiaomi Mi 3 scooter and want to increase its speed, there are simple modifications you can make without replacing the battery. By following some easy steps, you can boost your scooter's speed from the default 25 kph to a maximum speed of 58 kph.
My Stoner Mind bass test with proper power supply this time
Просмотров 362 года назад
My Stoner Mind bass test with proper power supply this time
4k-Young Jeezy-Put on-25-35 hz Logitech z 506
Просмотров 763 года назад
4k-Young Jeezy-Put on-25-35 hz Logitech z 506
Hey man, so i am currently trying to get a refund for mine. I believe that the way the cabling needs to be pushed into the stem from the handle bar during assembly is what is causing issues like this. When tightening the hex screws, it pinches the cables and severs them. If you remove the handle bar you will see what I mean. I would like to get in contact with you if at all possible.
you know very well tho that if u stand on it u wont go faster than like 32 or 35 kmh
i did this and i don't know why but it goes 80 and when i ride it it does 30-31
@@turbofan69just think abt it. When the wheel is spinning freely it can easily reach high speeds but when u stand on it it has to fight against the wind resistance and against u
@@SupremeAvocado Now that I changed the amperage and some other things , it goes 45-50 when I ride it and when I lift it up it goes over 90 but I'm not sure if i should let it go over that because my tires almost fall off at 85.
What, scooter, do do you have
@@SupremeAvocado mi 3
That’s strange, glad you posted your review which helps perspective buyers like myself. I’ve seen a lot of other reviews and even though they have cons in them, they are not to the extent of your feedback. I’m sorry you are going through this. Wouldn’t the warranty cover it for you though? Most other reviews rate it as a good scooter and don’t have the same issues you are facing. I’m no expert but I wonder if you change your tires to a more rugged tire would it help with your suspension?
Yes the warranty covered all the little repairs I had to have a lot done to the scooter and then one day my scooter stopped working it got water damaged and I had to pay a lot of money to get it fixed because apparently it wasn't covered under warranty
And yeah I might try changing the tires at some point
how do i do it and the scooter is not responding the battery 🤣💀
Where did you find the manual pls?
I never found a manual just built it myself
Can you do a tutorial for it ?
Fire hazard
Там чето отвалилось
Warum schwankt die ladeanzeige so??
Because it's using field weakening to increase the speed of the motor which makes it fluctuate
Please how I can make it
There's a basic tutorial on my channel
@@noahallen227i don’t find it
Nice car
Battery’s gone in a couple seconds!
He modded it to where while riding the battery indicator becomes a power output indicator I think
How much does it cost
0$
Real
How u know
thanks man
No problem!
Do you have to assemble it yourself?
Yes, it is very simple; the protective backing for the acrylic just needs to be removed, which takes some time.
@@noahallen227 ok thanks
The breakdown voltage of a dry air is 30 kV/cm. So, since the distance between those electrodes is around 1,5-2 cm, I would say that the voltage that device generates is at least 50 kV.
I need one.
that would hurt just getting poked by.
Except its a stun gun, not a tazer. And its junk
Read the title how's it junk this thing would still give a good shock
That sounds like it’s gonna give a grandpa flashbacks
Its 1K volts not million😂
mate it says 1000 killa volts
1kv = 1,000volts 1000kv = 1,000000 volts
Boy you better tell somebody
He told all of us so we can go get one
From what I have been reading about this it happens because the gas inside the Geiger tube gets ionised from the plasma ball
did you burn the front motor? mode1, rear motor. mode2, rear and front motor in economy. mode3, both motors, maximum torque. from my experience after building an electric bike. the maximum temperature of the enameled wire is about 55°C. this depends on where the sensor is placed on the winding... but you have to keep a safety margin. for the controller, it's almost identical. ideally, you should place temperature sensors on each controller, and in the wheel windings to stay well below 55°C, and not for long... long, or, above, the enamel loses its insulation between the electric wires short-circuiting some coils/loops the coils... some loops work, others don't... it makes jerks and high current consumption by the controllers... but generally the screen controls everything and can become defective. according to the video, I imagine, maybe the front wheel winding is burnt and the wheel needs to be changed. you need to check the front wheel controller, if it is not defective. check if the screen controls the controller and the rear wheel. according to the video, you can ride with the rear motor, without forcing, or too fast.
No this is a brand new scooter I still never solved the problem it just went away by itself
But the controllers get very hot because it's poorly made
@@noahallen227 I am very happy for you to know that it was only necessary to dry the front motor. I am very interested in this scooter because the manufacturer indicates IPX6 and IPX7 water resistance ratings according to some elements. So, new, the front motor had water. The manufacturer indicates IPX7 water resistance only for the motors. Other elements are only IPX6. So the motors are not waterproof ...? For this problem, had you ridden in a lot of deep water for a long time? Later, and after drying, you never had new same problem. Later, did you ride in a lot of water (without having a new problem) ? thank you for the information on the controllers. do you know the maximum current accepted by the controllers? the controllers get very hot...do you think to drive hardly or normal, or climb ... ? How controllers permits to drive (speed,climb,normal...) without to become hot ? if you have any advice for improvement ... I will try to see the update needed. Many thank
Excellent video and thank you. I just ordered one from Amazon so we’ll see how it goes 👌🏾
Thanks I've still got mine working great just wish I bought the other soldering tips
@@noahallen227- Yup, I bought the version with 6 tips ⚡️
Does it work with 4 ultra?
All the newer scooters are firmware locked
for pro 4 is the sale ?
no
Mine is go 25 kmh i am bullet 😢
Jst mam qa tasta k gre 55
thats really slow, mine does 67km/h
Nobody cares if your e-scooter goes 67 kmh and what good is that to me
Monte dessus et roule pour voir
Sa monte a 35-40 c'est pas mal déjà
Ip67-ip66
It
How to repair
My Xiaomi 1s gets to 40kmh. A little bullet.
how?
@@brendonserban6105 Software changed, and that's all.
@@brendonserban6105 Easy. Changed the software and put new parameters and it's easy. Can be done with a cell phone as I did.
@@FURY1958 thank you!🤝
Plis x rider
It is nice that someone takes their time making a (for most parts) better firmware for cheap geiger counters. But I'll have to join the critics. It's a bit too simple for my taste. Have tried it on Fnirsi GC-01 but I'm not so sure it's for me. Would be nice as others say to have an advanced screen option displaying most interesting values at once. µS/h and CPM as the two most important ones but in smaller fonts could be displayed CPS and mR/h as well as uncertainty and current time of average - no more constant switching of secondary value. Sure it's for geigers with high resolution screens - not the low res FS2011. If there's room for it then a timed count would be nice. An option in the menu for timed count and then just a fixed set of values like (1m,) 5m, 10m, (20m,) 30m, 1h, (3h,) 5h, (10h,) 12h, (24h) etc. to simplify input of timespan and numbers in parenthesis could imho be omitted to minimize number of menu items. But it's not the only thing I'm a bit weavy about. It's as if default tube settings drive it harder than stock firmware encreasing count rates. I wonder if it's within suggested range. Don't really have suitable equiement to measure tube voltage so I'm a bit unsure if its a good idea to run it with default settings. Last but not least while it is reacting way faster than fnirsi stock firmware (seems to average 20s or so) it none the less somewhat bounces around - even on adaptive precision. I have a GQ GMC-300S and with it on dynamic it doesn't bounce around that much. Wonder how they do their average - something must be different - and clearly open source isn't better in this case (yet at least).
Totally agree with you. I flashed my unit just to give it a try but after having played with it for a while I've already gone back to the official firmware since this looks like a downgrade to me. It's just a shame Bosean doesn't offer some of the nicer features of RAD Pro though. I really like the fact that it can blink the LED on counts and some other things. But all in all, RAD Pro is too plain for me. The author is saying it's because it's designed with the "KISS" (keep it simple) principle in mind, but I just think it's a waste of potential. I wouldn't want to watch my Blu-ray movies on a black & white TV either.
@@Ni5ei I kind of suspect the supposed "kiss" is - well... - because you have to start somewhere - and that I sure respect. However I think not many wanting to try it out they're really the total KISS people - otherwise they'd bought the geiger they wanted from start and people messing around installing their own firmware - especially on the models that are not drag 'n' drop - I doubt there's many KISS people amongst them if any. Sometimes it can be too much KISS. At very least an option to have CPM, CPS, time & max always displayed to you don't have to cycle through them. Personally I'd prefer smaller font and have the average screen on same as well - or have a large instantaneous value always display and make the cycle button alter between CPM etc. and their avg. values. I'm not a hardware close programmer (c# web and business oriented) so I have no idea what it would take to implement an advanced screen in option in options - and how much extra code it would require. As said I'm also unsure if the longer goal could be having it officially licensed to some brands and as such there might be considerations against a too complex screen if it has to live up to some ruleset to be used by public authorities and regulated industries. But even GQ GMC-800 which comply with USA NIST and NRC standards have a main screen which displays much more info at a glance. (Just bought the 800 - can totally recommend it)
@@HifiCentret Ha ha, yeah you're right about that. How KISS is it to have to take your unit apart, solder 4 header pins to the mainboard, connect a programmer and flash the firmware? I had to do all that to install a firmware that can do less than what was already on the device. And when I ask about it on Github I'm being told it's because they want to keep the interface simple... 😂😂😂 Like you're saying, it sounds more like the person developing it has no clue how to do it. I mean, the battery icon is all black. How would making it green and turn red below a certain percentage make the interface less simple? It's just a basic feature nearly every battery powered device with a color screen has nowadays. Like you're saying, if the person who's doing the programming isn't familar with stuff like that then there's nothing wrong with that. But just be honest and say it. Don't hide behind the KISS principle to cover up your lack of skills.
@@Ni5ei I don't think he doesn't know a way. As said I'm no hardware close programmer but there could also be a factor of keeping as much code the same between platforms. So some common code and then what's different for the platforms. But lets be honest. Perhaps the time is to differentiate more. People opting for the simpler devices want simple stuff that run a long time on a couple of AA/AAA for emergency use. Those with color screens want all the bells and whistles. Large parts of the UI could still be centralized - although I'm unsure of how large an overhead of the compiled code that would be. Usually not a big deal when developing business applications in higher level languages on more powerful platforms - but here there's no OS per se - code is running more or less "directly on the hardware". On the other hand there's a chess game which not exactly minimizes code although on might only impact processor when playing and of course how much space firmware takes up. On the other hand chess apparently isn't for Fnirsi with WCH processor. Not that I'll ever play it anyway.
@@Ni5ei I believe that there is significant potential for improvement, and there are various features that could be added as you were mentioning . In my opinion, I find it to be a much better option compared to the old stock firmware in the bosean. One option is to visit his Github and suggest some changes that he could do in the future.
is it available on ios? and what if ive updated the firmware on mi home app already Also my scooter doesnt turn on when i shut it off what shall i do?
Bro help for drive mode not work how ım open drive mode
I chipped it and it goes 38MPH but when I ride it only does 20-21mph
Only goes 18mph when I ride though?
Close up view please
What are the top speeds you get in Mode 1 and 2?
1 is 15 kph and 2 is 25kph
Can it damage scooter?
Adjust the settings carefully and the scooter will be fine I ran the hack on my scooter for 2 years until I bought a new one
@@noahallen227is it poss for the 1s? Please reply just a yes or no? Thank you!
@@noony2k Yes
What song is that the bass goes so hard bro I got 2 10’s by JL audios with the amp to compliment them as well we on the same bass length 😂🤙🏽
How you do that
Flashing the software to a new one. Then change it with your own phone cell. No wire required.
Hope the company stands by their product
gracias por joderme el patinete
que te ha pasado
could you make a video where you ride it with that hack pls