Видео

Hahaha Thank you for watching. I should have tried it right there since I did it on Taskmaster/skeletor.

Thank you for watching.

Thank you for watching. Yeah, the sculpts are better, the articulation is slightly limited to keep the sculpt better. I think the value is good. If you can find a place in your collection, I do recommend it but I would look into more reviews for older releases.

Thank you for watching. Yes, a very surprising figure and definitely worth the money and addition to any collection.

Thank you for watching. Try BBTS: www.bigbadtoystore.com/Product/VariationDetails/272232?o=4

Thank you for watching. McFarlane beat me to the punch but it will be fun to do comparisons.

@@amusedjester yes can't waith

Thank you for watching. I agree, there's a lot of space back there and the extras on the cobra stinger shows what could have been added. But, it's still not bad for a $75 vehicle of it's size.

Thank you for watching. I think in one of the streams Lenny actually pointed that out as misspelled accordingly. I can't remember if he said that it's because Torch can't spell or something. It's amusing.

Thank you for watching. Yeah, I just could not walk away from the price. Later in the month, I will do a video of what I got for July; the list is scary but the overall savings is insane. You should keep an eye on e-bay. I don't know what's going on in the collector community to be off-loading items that are waaay below the initial retail value.

Thank you for watching. Yeah it threw me off hard with my first impression. I had an instant dislike on the face and couldn't figure out why until I looked over other reviews. It's a shame because the portrait has really grown on me and it's a great figure and stands out.

Thank you for watching. This is the Batwing from Spinmaster designed for their 12-inch line but I customized to seat a 1/12 figure.

Thank you for watching and the compliment. I don't do commissions but I hope my videos would help anyone to venture into their own customs. My process is really simple and shouldn't need expensive tools. Don't be afraid to make your own and experiment. In the end, it will be more rewarding and enjoyable.

thank you for watching. Actually, when I compared it to the Hot Toys The Batman, what I pointed out was that this figure did it one better. That Hot Toys figure really bummed me out. I actually edited in, badly, a few things I discovered as I futzed with the figure that actually shows how my opinion turned around like the fabric used on the cape. I still think that the value of this product is very high and can be easily enjoyed but I can't help it that when I talk about the cons it is going to sound negative. If you have the sideshow version I would be curious to see a side by side comparison.

BTW, thank you for watching it for that long. I fell asleep a couple of times while editing it. Lol.

Thank you for watching. They are called neodymium magnets. They're strong for their size and cheap. This was my last order and it comes with 200 different sized pieces. www.amazon.com/gp/product/B0C8MKZJQB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thank you for watching. That price is just unbeatable and a great start to customize this to fit your needs and collection.

Thank you for watching. Yeah, when I saw the promos, this is the figure that made me start and grab the other figures. If you can get past the faded color of the uniform, every other nitpick has been addressed.

Me too. A lot of these guys are seriously hard with their reviews. One guy says "fabric is too thin." This guy says "Fabric is too thick." You can't please anyone these days. I love this figure and 3Z did an awesome job imo

@@user-vs7ei7kw9i I did mention stormshadow's thinner fabric which I think works really well for this scale. It folds more naturally. I mentioned that I wished they had used some similar fabric for cobra commander. For the cape's fabric, I originally didn't like it but I inserted an edit which should have actually shown that my opinion turned around as I played with it more. I did consider re-shooting the whole video with the new opinion. But I went with a insert edit to highlight how my opinion changed. I wonder if that was the wrong choice.

Thank you for watching. I agree. I have a hard time looking for appropriate 1/12 scale seats or consoles.

Thank you for watching. I'm sorry to hear that. It's a much cheaper KO version but it's still a shame that something that feels sturdy should break so easily.

Thank you for watching and commenting. I actually endorse buying this product once the 1989 Batwing comes out. The combined units make for a great diorama. The only reason I didn't buy it initially was that I don't collect 3 3/4 figures AND the scale itself didn't fit within Spinmaster's movie batman line. IF it had fit the previous The Batman line, it would have greatly expanded the value of the line.

Thank you for watching. I almost bought some as the price was reasonable but I just don't collect this scale and i don't like the limited articulation.

Thank you for watching. You're quite correct. Even as I prefer the Orko "accessory" to the actual Orko, I thought myself that the simplistic and cartoonish design would clash with Mondo's design. It was quite a puzzle to determine how I would resolve the issue of "scale" in my mind. I think I wasn't quite referring to scaling them as they were in the cartoons but as how they should scale towards each other. For Beastman, I am glad that they shrunk it down a little from the first photo release but it is much bigger than a regular Mondo figure. But in Beastman's case, Mondo won me over with their design, product and logic. Beastman, by name, should be bigger, almost hulking and have that "beast-like" appearance. With Orko, I still see him as an adolescent apprentice. Not that he is in the cartoons' it's just his behavior and actions made him that way to me. And when you pose him side by side with a Mondo figure he is just slightly too big for me. One thing, I have been thinking on is the robe. If the cloth part of the robe were not there and the figure ended at the vest; I think that actually works better for me. But, you can't hide the robe under the vest because that exposes the folded legs of the figure. In the end, I think it will "grow" on me. Get it? Hahaha.

@@amusedjester Haha, yes, what you say makes sense! By adding these extra features to Orko, such as the legs, they were forced to make him bigger, but then that also works out better from a value perspective. Mondo's take on the character is definitely a more serious design compared to the cartoon, but it fits in better with the line as a whole. Will you be getting the deluxe Scareglow and Scare-Mare? Mondo showed off a prototype of each of them at the recent Monsterpalooza event.

@@nicholashill8724 It's not on the basic fund list that I had allocated for Mondo but OMG are they not gorgeous? BUT if I get Scareglow with Scaremare, I would have to get Swiftwind. Two things that may convince me more is the final paint app for both and how the wings can be folded on Scaremare. They're beautiful spread out but I'm desperate on space right now. How about you?

Hahaha! He-man And Galaxy Quest. Brilliant!

Thank you for watching. $4 each, I think the last time I saw action figure retail for that was in the 1990s.

Thank you for watching. Yes, it is. It's been on sale for some time at $65 on amazon.

@@amusedjester yeah I'm in Canada and noticed the price drop so now I'm thinking of getting it but the cag set is currently out of stock.

@@impossiblepie Ace from Ramen toys just did a livestream where he mentions a possibility of doing another run of it. I think he just might especially when he reveals and opens for pre-order the CaG 2.0

@@amusedjester awesome!

@@impossiblepie np, here's the link to his stream and he mentions it at the 8:11 minute mark. ruclips.net/video/Zw9kzdWjdaU/видео.html

Thank you for watching. I really tried to get into the Arkham games and over the years have been trying to convince myself to try them again. I actually have all the games in my collection, lol.

Thank you for watching. Yeah, I had that problem years back, so I ended up buying some cheap screwdriver and other tools made to fit into smaller holes. It really is a very easy replacement process.

Thank you for watching. Yes, it has a more realistic design, being bulky and older. Probably why I was so excited for its release.

Thank you for watching. I'm glad my review helped you on the decision. I'm still torn with the figure only because of what Hot Toys pulled with the gun. You should watch Jedha Patrol's comparison. The visuals, for me, really show that this one looks better overall but the quality may be in Inart's favor. I am uploading a comparison with all the Hot toys Batman later on if it will help you further.

Thank you for watching. Saturn/mars toys have made improvements on the Batman figure so that the trunks actually fit/looks better. But the original has an inner lining that gives it a wider torso. For the price, it's a good value.

Thank you for watching. These are Vallejo acrylic paints. It's stuck pretty good considering I didn't do any surface preparation at all; no primer paint and I don't think I even washed it with water and soap. But these aren't figures where paint rub will occur on joints and there really aren't going to be surface friction occurring to disturb the paint too much.

Thank you for watching. I don't know why your comment didn't register to my usual place. But to answer your question; these are 7 inches. I don't think it has a proper scale designation. These would line up with the McFarlane figures. Scale tends to be different from companies. I have found RC vehicles that are 1/10 scale that these figures fit perfectly into, while 1/12 vehicles are too small for hasbro's joes or marvel figures.

Thank you for watching. Ouch! contact ramen toys for a replacement. I'm almost sure it won't be an issue, although having to wait for a replacement sucks.

Thank you for watching. I agree, I can't even see any of the gap that occurred during the GDL review. The delay was worth the time/effort it took to fix the issue.

Thank you for watching. I hope Ramen toys is still offering it up. It really is a great upgrade and once the seat and cockpit is out; we will finally get a good 1/12 scale 1989 Batmobile. Although, I have to say; to make it perfect, we would need to re-paint the car to match the paint job on Ramen Toys CaG set.

Thank you for watching. Hey, no problem. To be honest, the biggest problem your CaG set has given me now is that the paint job is so much more superior than the original toy that I either have to repaint the car to match or really squint my eyes to not see the difference in paint quality, lol.

Great review. I just switched my canopy out. Mcfarlanes Batmobile looks alot better with Ramen Toys Cag set. Good job

Good job with the Cag Set @RAMENTOY

@@chadlaurie4904 Thank you for watching. I am looking forward to the second part of Ramen toys upgrade to this thing.

Ace, any chance you'll make more matte Cag sets?

Thank you for watching. Absolutely!! I am really hoping they expand on the characters they produce.

Thank you for watching. Yes, Mondo has changed their paint application after the He-man deluxe. It's a little bit more shinier but it feels less prone to scuffing and paint damage. And Panthor does have a sheen to it's body compared to Battlecat.

@@amusedjester Do you prefer the sheen? I wonder whether the sheen from the varnish is to protect the paint on the hinges, as the He-Man loses all the paint on the hinges of the elbows/knees once you move the arms and legs a bit and all the paint scrapes off. Whereas the Deluxe Skeletor, the paint on the hinges possibly stays there longer and matches the paint on the arms and legs to help hide those joints a bit better? I think they changed the paint at the point when they changed the bases from the old Mondo base to the new cracked earth oval bases, and they removed the magnets from the boxes and replaced with velcro. The first Trap Jaw release does not have a sheen on him and he comes with the old base and box magnets, and he was released after Deluxe H-Man. I think Prince Adam has the old base too, so this change seems to have occurred post-Prince Adam and pre-Deluxe Skeletor, Beastman and Panthor. However I do not have Beastman myself yet so I cannot tell if he has the sheen on him, he does have textured hinges though which looks cool. You mentioned in your Beastman review that he looks much better in person than through the camera, so I am looking forward to a Beastman figure when I finally get him so that I can understand better what you are referring to. 🙂

Thank you for watching. If I remember correctly those were kits I bought off e-bay. I think each one was $10?

Thank you for watching. Yeah, I sometimes use it as a protection layer on foam. I experiment a lot since I don't really know a lot. Thankfully, I am ok if anything gets ruined with anything I do as I can always make a new one. Who knows? The newer attempt could be an improvement.

@@amusedjester right on never know till you try. Have you checked out other guys doing vamp stuff. Check out Aaron the toy enhancer

@@lokiwartooth1138 Oh yeah, at first I didn't recognize the name but I remember that I saw him upgrade his vamp into that RC; he did a lot of upgrades on his. I love and am inspired by other youtubers and I always try to shout out my inspirations in my videos. Have you seen that custom vamp where he added more seating room in the back and an actual mounted turret? I swear some of these guys are plain awesome.

@@amusedjester no I haven’t. Hey man come by the live shows and join in on the chats. Nothing but great guys. I do 3d printing. And other guys do dioramas, some do kit bashing, and conversions. Check out Aaron and crusty ole crow.

Thank you for watching. I actually went and bought the Polar lights Enterprise refit for $100 and that was just the plastic model. I did more research and found that I could probably find the complete light kit with the board for $250. I still would need to assemble, sand, fill and paint. I'm still hoping they Tomy will eventually get do the Refit version and I'll just buy that.

Thank you for watching. Yeah, I just want to review my toys and the value I perceive from them. The videos I put out are basically me trying to digest they toys I have just bought; so being as honest as I can to see how I feel about each figure. The Wasp headsculpt/paint app though, is just amazing. I'm about to review the retro scarlett and I'm going to bring up/compare it with the wasp portrait.

Thank you for watching. yeah that Wasp is top notch.

Thank you for watching. Hahaha, yeah super gummy. By just bending the knees you see them stretching horrendously.

Thank you for watching. I don't blame people for overlooking it. I'm guilty of it as well. I knew instinctively that I don't want to pay $30 for a McFarlane figure. It's not until you have them side by side that you see the value of each product. The funny thing that people don't yet realize is that Todd McFarlane, himself, acknowledges this because he sells the same figure/configuration still at the $20 mark. Why does Todd see some figures at $20 and some at $30? Because he can, that's it. Take it from Todd, the horse's mouth; People buy Batman figures, so he keeps making Batman figures. If people buy his figures for $30, he'll keep selling them for $30.

@@amusedjester Not only that but most of the collectors edition figures are brand new molds. So he's squeezing the customer for that up from so he can reissue them Later. A series that you could have also included was the WWE ultimate editions. 7 inch scale figures, three alternate heads minimum, six hands, title belt, and soft goods. I feel that if Big Daddy Todd included this stuff his collector's edition would be worth it.

@@amusedjester Also if super 7 ultimates were 35 Max they would be the best figures on the market I believe.

@@indarkestknight1 I'm not a wrestling fan but sometimes when I see that line I'm tempted to buy it. It's by Mattel and I'm still confounded why they couldn't do the same when they had the DC license.

@@indarkestknight1 I agree. At the $35 or even $30 price, a lot of Super7 faults could be ignored and would have been the best one. Honestly, Neca is the top for me. It's a shame that their subject figures aren't totally in my area of collection. But for the price and what you get from Neca, it's hard to find something to complain.

Thank you for watching. For the $30 price range, I agree. Marvel Select still has it's faults though. The Thing was released in 2010, so it took them 14 years to finish FF. Neca figures are slightly higher at $40 but the jump in quality is substantial, I think.

@@amusedjester hasbro hasnt finished many teams either the whole time they have had the license . Yea i like neca but all their making now is tmnt stuff which i dont buy so they pretty much have lost me as a customer the last year or so . But you have to compare license with license so for me select is better than marvel legends especially now . Every toy line has issues .

Thank you for watching and the comment.

Thank you for watching. I agree, that's why it took me more than 10 years to add it to my collection. Ironically, if it weren't for the rapid proliferation of McFarlane dc multiverse line in my collection, I never would have gone solidly into a 7 inch line.

Thank you for watching. Or how about Robin being as tall as Batman; figures with a bad sense of scale? Or paying 30 on a gold collector edition and having the back side unpainted? As collectors/supporters of the McF DC line from the beginning a lot of these little faults were overlooked because of his cheaper price but they can't be at $30. Not when his competitors are producing far better value. And his motto is more accurate as, " I HOLD the DC license, if you don't like it then don't buy it."

@@amusedjester your right. its a conversation that needs to be had. Plus everything you said I could've not said it any better as you put it. I will never support MacFarlane products he's always overly selling himself like a con- artist and not always delivering like he suppose to for example the new spawn movie. It's like I mentioned earlier it makes no sense to pay for something and your getting less than compared to the other companies example no extra hands or head sculpts.

Thank you for watching. I agree. I have a more recent video of what I did to the G.I. joe Vamp. In that one, the first 5 or 10 minutes I showed the final piece and what I changed. Then, if people wanted to stick around to see the process. I did a 10x speed through. Check that that out and tell me if that's a better format and thanks for the input.

Thank you for watching. Yeah, that's me being generous to McFarlane products. I think it comes from being used to DCUC bucks being re-used or even Marvel legends. But I think i'm over being forgiving when the price climbs to that level.