- Видео 189
- Просмотров 105 352
Fashionrider712 IStuntHi
США
Добавлен 25 сен 2015
Motorcycles and diy from home to metal fabrication and machining with a side of 3d printing.
Husky compressor regulator replacement 175psi 20gal
The barb for the pressure switch is 1/4id and i got a 1/4npt on the thread side since my manifold was all 1/4npt for the 5 ports. Harbor freight for regulator and gauge. Ended up reusing a gauge for the regulator. With the right adapters could reuse the stock gauges. Im guessing its 1/8npt.
Просмотров: 4
Видео
desert riding on the tenere700 t7
Просмотров 17014 часов назад
finalizing the route and its wearing in nicely.
new hill side has lots of potential
Просмотров 916 часов назад
I want to make this a new play area for all my bikes, t7, sherco trials and enduro. now I gotta figure out the lines and wear them in.
T7 clutch switch bypass at the relay. #tenere700 #t7
Просмотров 2228 дней назад
I fried my relay, and luckily a fb page member already went through this and linked me a write up someone did. But ill post this just so theres more of it on the web.
Electrical issues with my 2022 tenere700 #t7 #ténéré700
Просмотров 14Месяц назад
Clutch, kickstand, or neutral position sensors/relays. Im stuck until i can rule that out. I cant see it being anything else since that was the only circuits i messed with. Bike starts fine in neutral but as soon as i shift out of neutral it dies. Kick stand switch is jumped and i double checked higher on the wires just incase. Theres gotta be others that had same or similiar issues! Help a bro...
Derek weaver 10k certified lift test
Просмотров 373 месяца назад
Everything works, might have some leaks, and just need to finish secruring the wiring. And install my power cutoff next to the power unit.
2024 sequioa 285/65-20 +20 offser
Просмотров 723 месяца назад
Fuel rebel 6 on the sequoia. Rubs on all sides. Had to pull them off until my westcott preload spacers arrive.
new section going to be added to the commute hopefully. ''the up"
Просмотров 343 месяца назад
wearing in the lines with my enduro 2 stroke. so my big bike (tenure 700) will have an easier time with it.
new section "the down" is what my big bike will actually see
Просмотров 103 месяца назад
backward of "the up". this section is way funner than the jeep roads or mtb trails that are out here.
Tenere700 nicecnc front rotor guards
Просмотров 233 месяца назад
Quick an easy install, build quality is decent, the guard is welded to the base so not sure how strong it actually is. Not as thick as a bullet proof designs. Testing coming up next. #tenere700 #nicecnc
Got some progress on my 2 post 10k Derek weaver certified lift
Просмотров 173 месяца назад
Instruction are mediocre at best. But i wish it said make sure the lines are routed before connecting them at the t. I dont know if this is the best practice for height wise between both columns. But i feel better about using a spacer at the lift arms than spacing the whole column up with a big shim and then shimming on that to make it plumb. 1/4 over 115” should be an issue for a vehicle lift ...
Itll be a short cut once i wear in the lines.
Просмотров 113 месяца назад
Only down for the big bike, ill try the up with the trials bike tho.
Quick vid of my new 2024 sequoia platinum
Просмотров 1223 месяца назад
Traded in my pilot to get this sequoia. All though the pilot is very capable for a front wheel drive/awd the lift kits available are crazy expensive and well just not really what the vehicle was meant for. This sequoia suits our needs better. And it actually can tow more than my 1500 sierra.
starting to make my own adv friendly trail in foothills/rivermountain/bootleg canyon. t7 las veges
Просмотров 2404 месяца назад
starting to make my own adv friendly trail in foothills/rivermountain/bootleg canyon. t7 las veges
got lost again exploring river mountain Las Vegas adv
Просмотров 1134 месяца назад
got lost again exploring river mountain Las Vegas adv
How easily the t7 can get grounded. Broke my kickstand sensor.
Просмотров 2,3 тыс.4 месяца назад
How easily the t7 can get grounded. Broke my kickstand sensor.
Been scouting this cut through on google earth. Side hill and short vally cut through from bootleg.
Просмотров 634 месяца назад
Been scouting this cut through on google earth. Side hill and short vally cut through from bootleg.
Trail to lake mead overlook from bootleg canyon rzr pro xp4
Просмотров 114 месяца назад
Trail to lake mead overlook from bootleg canyon rzr pro xp4
2014-2018 sierra tailgate on 2008 sierra
Просмотров 165 месяцев назад
2014-2018 sierra tailgate on 2008 sierra
A little bit of progress on my 2014 to 2018 tailgate on 2008 sierra 
Просмотров 175 месяцев назад
A little bit of progress on my 2014 to 2018 tailgate on 2008 sierra 
Found a rock bed hill river mountain las vegas henderson keeping my enduro muscles active!! 😂
Просмотров 686 месяцев назад
Found a rock bed hill river mountain las vegas henderson keeping my enduro muscles active!! 😂
Baby trend trooper 3in1 seat in rzr pro xp4
Просмотров 1186 месяцев назад
Baby trend trooper 3in1 seat in rzr pro xp4
2024 lamar 18ft dove tail tandem 3500 axles 7k gvwr car hauler e track
Просмотров 296 месяцев назад
2024 lamar 18ft dove tail tandem 3500 axles 7k gvwr car hauler e track
tenere 700 and jeep roads. chin mount on my at950 helmet.
Просмотров 1067 месяцев назад
tenere 700 and jeep roads. chin mount on my at950 helmet.
Testing out my auxbeam fog lights on the t7 tenere700
Просмотров 707 месяцев назад
Testing out my auxbeam fog lights on the t7 tenere700
Found a nice valley thats sort of doable with the trials bike. #vegastrials
Просмотров 1008 месяцев назад
Found a nice valley thats sort of doable with the trials bike. #vegastrials
Las Vegas river mountain trail scouting on the sherco st250 factory
Просмотров 678 месяцев назад
Las Vegas river mountain trail scouting on the sherco st250 factory
Found a nice technical area in a valley by my house.
Просмотров 538 месяцев назад
Found a nice technical area in a valley by my house.
Drilling some holes on my tormach pcnc770
Просмотров 369 месяцев назад
Drilling some holes on my tormach pcnc770
How high of the ground does it need to be?
About 2ft. But look at the sight glass there should be lines, make that level. And the honda logo should be about level. But i just throw in 2qt. Since the motor it tilted. But the pump is in the front of the pan anyway so spec should be fine. I think its like 1.5qt.
@@fashionrider712istunthi9 Thank you man, real helpful. Bought a swapped grom, trying to learn about it, its concern not being to see any oil. Lifting it that high and keeping it stable is going to be a real challenge. Thanks again
@@kelvinks8018 ive just recently been giving out the stl file for the swap elbow also. ;) look me up on the socials. Fashionrider12 ig or ross istunthi on fb
Barstow/Stoddard Wells area? Rough Terrain and you're wearing shorts. Lol. Looks like fun for sure. Haven't taken my T7 there yet. This winter for sure.
This just a detour i take for my commute home. Its about 5miles and takes 30min no stop or stuck. I usually take about 1hr. But its getting easier the more i wear it in.
Did u redo your suspension? Stock front is actually kinda dangerous off road.
Dear god I hope the 2025 isn't like this.
Which part? The black oil or the pressure behind the filter? Lol
@@fashionrider712istunthi9 Just the process itself. The oil filter is in a terrible position.
Looking at 2024 escape X Have you enjoyed the EM?? Would you buy it again???
Depends on what you use it for. Now that im in vegas, range is more important. So im currently trying to sell my escape r. But for electric range will always be its down fall. If your trails are mostly tight technical and slower speeds id say itd be perfect. But throw in a 5mile stretch of trail traversing thatll kill it quicker.
20mile is a good safe ride. Of slower stuff. But at about 20mile is also when the range anxiety kicks in also. Jus plan the ride to be about 3/4 back to the staging/truck parking once you start getting to the 15-20mile mark. Or make majority of the first half uphill, then coming back you can use the regen alot more. Lol
What rear rack / side grab handles are those?
The upper grab bars is apart of the shorty rack (adventure spec). The lower handles are heed crash bars.
Nice 1
still the one an only person i know of with a dual caliper bracket on a t7. ;). i think this vid was before the handbrake. i can do seat standers now. and i want to build a stunt style subcage for the rear pegs to stand on thats a better height. but i will have to be removable since i do off road it more than i stunt it.
Your music selection! Has me subscribing. The Movement! 💚
They were on the gopro app for idk how long. Figured they would blow up. They got some beats.
Do the rub
Not terrible. Big bumps will eventually wear a hole in the plastin fender liner up front.
How much does this motorcycle weigh? And how much gas does it Looks amazing and beautiful. How much gasoline does it consume per gallon or liter, etc.,?
i think it was about 150-160lbs. and id say about 20miles of slow technical trails.
How durable is it? It doesn't leave any dents or marks.
Sold the bike. But bella has listed to the riders an offered stiff foam. I made my own cause there was nothing decent to buy.
What is that cross brace? I like how it brings the exhaust down from the turn signals.
its the mount for my exhaust.
What drop you have on the truck?
4/6
@@fashionrider712istunthi9 🔥🔥💪
Fun fact, the kickstand sensor goes on every Yamaha. From my Zuma to my mt07 to my tracer. We just crimp those wires immediately before it leaves you stranded. My Zuma did. It's a simple twisting together of the two wires to the kickstand module. You lose the feature of engine cut with the stand, so what
Yes, I smashed mine against the rock. But I was just showing how easily the thing can break.
Just came across this nice vid. I'm considering to buy such fun bike, what realistic speed can it hold on tarmac without melting the engine or swallowing the whole tank of fuel in a snap? Thank-you.
Maybe 35mph. But i dont see it going more than 15-20miles at that constant speed. Could possibly get a custom rear sprocket that way smaller to help, but your probably better off buying a zero bike that was made for street use.
Sorry idk why i thought electric motion. But i would guess like 45mph would be safe. 4th an 5th are really tall like if your pretty low rpm in third you might die out when you go into 4th
@@fashionrider712istunthi9 Yes, I did mean the sherco, thank-you for replying.
You probably shouldn't attempt to make new trails in the River Mountains area as much of it is a federally protected/restricted area. $0.02
Dude, I can’t believe seeing the negative comments. Awesome seeing you deal with the situation and great that you were able to get yourself out. The T7 is insanely capable and an absolutely blast off road. Ride hard man.
Yea bro, this bike lets me take jeep roads home. Idk if that will make my rear tire wear out faster tho!! Lol
Buncha people who have never ridden offroad. Guarantee a T7 is more capable than any of the mfers criticizing it here lol
Do you have GPX?
No, it doesnt exist. Its a federally protected area apparently.
Kickstand sensor? Ya need a sensor for your kickstand??????? BWAHAHAHAhahahaahahahaa
Almost every street legal bike has them.
This bike looks miserable off-road even without the broken kickstand switch
Its not to bad once u learn what it can or cant do. This bike still surprises me on what it can do.
where is this? looks like a great off road place, you Americans are lucky
Vegas
can not see this heavy behemoth in real offroad mode ...maybe some logging roads or fire trails that's about it
It can do some decent single track. Would need some dirt specific tires for more difficult stuff. But for the detour off the jeep road its definitely capable.
This bike is too heavy for ruff stuff, unless you Pol Tarres :))) the ride becomes nightmare.
Yea nothing to crazy. When i jump on my 2stroke it feels like a surron after tho!! Lol
That's unfortunate - it can be bypassed in the field if you have tools. Luckily I read up on this switch before my first offroad ride and jumped it out with a bypass plug. Few bucks and a few minutes to install - Camel and T7Rally both sell 'em.
i knew about it. was in denial. lol... knew exactly what was wrong. luckily i had a nail clipper in my backpack!!! lol.... i carry a multitool and a small selection of tools now.
Is there a way to bypass it? That's retty unfortunate
Yes, just connect the 2 wires that go to the sensor.
the heavier you are the harder you fall. next time try crf 300 or 450l
Im usually pretty graceful, but where i would of pushed off there was a big rock. So i had to bail.
I got a T7 too probably should learn how to fix that.
The kickstand switch is... by the kickstand. It's a 2 wire switch. You can cut and twist them together in a pinch and that'll make the bike happy. It's strange that the kickstand/bracket is the lowest point on the bike. Seems like that could have been made a bit better for offroad use.
They did put a thin dinky ass guard over it. Lmao
So did you fix it there and then? How? I have such a sensor on my KTM Duke. Luckily, I never had any problem with it.
Yes, just twist the worrs together
Oil change at 2200 miles? I have the same 2023 pilot and dealer says to wait till the wrench light comes on and it turned on at around 7000 miles.
The oil was pretty dark. I always change my oil early on break in. Its when the oil has the most gunk in it.
Bruuuhh we are at the same page.. mine was 6,300 on my first od change. Im gonna take this to my local car service for oil change. Coz now i got 12,600 since the first oil change and the dash it still have 30% oil life.
7k is too long of an interval with those tiny little oil passeges,VTEC, etc. 5k with synthetic.
On our old 2013 Acura Mdx, the oil filter was similarly positioned. I recommend using a plastic bag and cover the filter in their to prevent making a mess
U think 24x11 would stick out on the rear? N would it rub if you have a 3/5 drop?
Depends on the offset
would you recommend castro engine oil?
Honestly, any brand oil would be better than used ready to change oil.
Sorry looks like 16-18 on center for the support beams. 4ft was just where they secured the wood deck to the crossbeams.
What do you thing about the seat after one year? Does it worth to install, do you ride mostly with the seat?
I took it off. Enduro riding needs a more solid mounting.
What is this yellow ribbon for?
Trail marking. So when u ride the area it wears in better.
Use a 2 liter soda bottle cut the top and that’s how you get your oil filter use it like a cup .. very easy and no mess…
Clever tip, thanks.
My 2023 honda pilot elite has a 26,000 or 2 years oíl change and tires rotation free of charge
So does every other new honda, this is for those who dont use the maintenance minder
im about due for my free oil change an tire rotation also. still debating if its even worth it. wait in the lines with the car and then wait at the dealer until its done. didn't even realize they have a separate oil change line, looks like a jiffy lube. lol
Absolutely no reason to change oil at 2200 miles!!
Ok! 😁
It's old time internet wisdom that you are getting out all the break in metal shavings by doing it early. Except that is what the oil filter is for....and with today's manufacturing tech the amount of shavings isn't that much anyway....so I agree with you!
Also a believer of somewhat hard break ins.
Just changed the oil in my GX at 2000 miles. Never seen so many shiny shavings from the engine break in when shining a light onto the drained oil. Even saw a few “small” metal shavings left in the oil container used to catch the drained oil. Checked the oil filter and it too had shiny metal particles caught in the pleats.
@@lji2000 hybrid?
Yo how do I order any type of istunthi merch! Seen ray with a istunthi spare tire cover lol
We dont have merch. It might be a sticker.
The color is so pretty! I’ve had purple yam ice cream before and it was really good. Thanks for sharing the recipe
Omg yes love ube ice cream. I tasted it at an Hawaiian bbq place. The only place that has the ice cream tub for purchase is China town which is 25 mins from me. I admit in winter I’ll take that drive (I’m in Vegas it would melt in summer lol)
@@JaylaStarrube soft serve is pretty bomb too!!
Looks yummy I got head to my local China town … so can ube be found at the Chinese market or Korean?
In an Asian Store more specifically find a Filipino Store near you. "Ube" is a Filipino word translates as purple.
I only found at sea food city (filipino market)
amzn.to/3RWIb61
@@fashionrider712istunthi9 Ty!
@@JaylaStarr even got the extract on amazon too. amzn.to/47eoUBE
What type of frosting would you use? Please do part 2 and show them frosted. Thank you. Also, what temp and for how long in oven.
I dont do the frosting. And at the very end 295 for 25min. It varies between ovens tho. May need to adjust the time an temp.
Dislike for not giving us a money shot
There was like no difference in sound from the stock exhaust.
Its a lil louder. Idle is almost the same. And thats exactly what i was looking for.
@@fashionrider712istunthi9 a little louder and a better tone, exactly what I would want 👍
i identify with your frustration. i change my own oil so i know it's done right. they maker it more difficult on purpose. a dealer told me so you will bring it in.
soon my lift will be up an running. but i still bought a service package for my newest vehicle (sequoia).
Well thats a nightmare.
So you can’t turn off the radio 📻!?!? Don’t quit your day job!
Why would i quit my day job?
Rusty chamfers! I'm fkn dead ahaha. Side Hoes
he aint never gonna live that down!!! lol
Front wheel drive cars seem to be the worse for oil splashing on frames or cowling, it would cost them too much to build in a plastic drain channel? My Passport is exactly like yours, my Rav4 splashed oil on supports And cowling.
Maybe you can pre-drain the oil from the oil filter by punching a hole in the bottom and let the most of the oil drain out before removing the oil filter. I did this so it did not make such a mess even with the drain trough idea. Thanks for the video.
Small bag under it as its being taken off
it was my first change. i didn't want to ruin the filter just in case the filter i bought was wrong. traded in the pilot already tho. now i got a gas guzzling hybrid!!! lol
Sick setup. Can you make a video of you cleaning your machine so all the guys you taught can learn how too. 😂
it wouldn't matter, they cant use shop vacs to clean the machines anyway. ;)