- Видео 71
- Просмотров 149 608
novakin
Добавлен 3 фев 2008
How to Respool Cardboard Filament onto Reusable Bambu Labs Plastic Rolls Instantly
Just crack off the cardboard and the bambu labs reusable spool slides in perfectly!
Просмотров: 574
Видео
2022 Cadillac CT4-V Blackwing Crackles & Pops 2nd Gear 5k RPM Throttle Lift
Просмотров 277Год назад
LOL Cadillac Engineers... how did you get this approved?!?!?! 100% stock car with 15k miles 6MT.
VALORANT - How to Build a Prime Vandal & Spectre Loadout in 40 Seconds COSPLAY ASMR LOL
Просмотров 6 тыс.Год назад
Fully 3D printed VALORANT Prime Vandal, Spectre, Classic, and Axe with integrated alignment using 3/8" dowel rod. These props are used for cosplay. There are no moving parts and are completely solid/non-functioning. Printed on a Bambu Labs P1P in PETG on a single plate, each in sub 20 hours. The only post processing done was support and brim removal.
Katsucon 2023 x VALORANT Cosplay Meetup at Gaylord National Harbor Maryland (THE TREES 👀)
Просмотров 1,4 тыс.Год назад
#KATSUCON #cosplay #valorant #playvalorant #katsucon2023 #katsuconcosplay #samsung Thanks to everyone in the video who made this moment possible! You're the real MVPs who put in the work, and took our vague unofficial instructions of "meet by the tree on Sat at sundown" ^_^ This video was shot out of the blue, on a 5 year old Samsung Note 9, and the sheer willpower of the #VALORANT community. M...
VALORANT - How to Build a Full-Size Phantom Loadout in 45 Seconds COSPLAY ASMR LOL
Просмотров 94 тыс.2 года назад
Fully 3D printed VALORANT Phantom with integrated alignment using 3/8" dowel rod. This is a prop used for cosplay. There are no moving parts and is completely solid/non-functioning. Printed on a Bambu Labs P1P in PETG on a single plate in 21 hours. The only post processing done was support and brim removal.
Chessex Unbalanced Dice CHX 27435
Просмотров 1882 года назад
We thought these dice were cursed, and ruined our DnD campaign. Turns out they were heavily unbalanced towards the 1 side of the dice! Chessex CHX 27435 Dice.
Literally Robbed by Respawn Entertainment in Apex Legends
Просмотров 473 года назад
The mystery of the disappearing golden flatty
reasons_why_you_should_play_stick_fight.mp4
Просмотров 344 года назад
reasons_why_you_should_play_stick_fight.mp4
How I Designed & 3D Printed a 2.1 Tang Band Subwoofer & Desk Speaker Set
Просмотров 4 тыс.4 года назад
Tl:dr I designed and 3d printed a 2.1 speaker setup for my desk at work. Here's a silly video of the speakers in action. The section with the actual video of the subwoofer is recorded audio, not overlayed! All prints are 1 piece, including supports & internal bracing, and fit on an Ender 3 Pro. The Passive Radiator Subwoofer required more than 1000g of filament, so I added a runout sensor to th...
Bran Alpha Strikes and Doesn't Kill Erk
Просмотров 284 года назад
Bran Alpha Strikes and Doesn't Kill Erk
Legolini Magazine Fed Auto Loading Crossbow
Просмотров 22 тыс.4 года назад
Legolini Magazine Fed Auto Loading Crossbow
CDC Autocross April 15th, Dash Cam Commentary :D
Просмотров 867 лет назад
CDC Autocross April 15th, Dash Cam Commentary :D
11/05/2016 CDC Autocross Drone/Dashcam Footage
Просмотров 1808 лет назад
11/05/2016 CDC Autocross Drone/Dashcam Footage
I’m feel box would perform better with one woofer
the big one is a passive radiator like on the side of jbl speakers, it does the work of a port without taking up box volume and without air noise
Do you sell the files for this model? Or did you buy it from somewhere?
nope, these models do not belong to me and i do not have permission to sell them!!! :)
can you send a link to the files please @@novakinb
Nice. Does that only work with that brand of filament, or have you found that most/all cardboard spools are dimensionally the same?
so far have only used the elegoo rapid petg but im sure it works with others!
that's so cool! 🔥 I made Vandal too (Glitchpop Skin)
'promo sm'
what model did you use for the prime vandal?
That’s sick how u get it?
3d printer
@@VaibhavSharma-fz5hs I figured
Сколько стоит купить такую подделку
First :get the pieces
So much fun to meet everyone!! I love the video ❤️❤️
Great video, cool to see from a pledge bro
Nice edit bro +1 sub
Thanks!
Drink it
Cursed
Clip strikes again!
Gottem
Dude I'm surprised nobody has clicked this. Time to do another video my guy.
This was one of the best nights of my life
Nice
Fantastic! Would you mind sharing your slicer settings?
I bought a laser scope like yours for my Legolini and the damn thing broke after 2 days. The problem was the grub screw wouldn't move the laser anymore because the return spring broke. With nothing to lose, I carefully drilled a small hole through the case on the opposite side to the grub screw and inserted a 3M Hex bolt which was just a bit wider than the final hole I drilled. This allowed me to adjust the laser from the top and bottom and now it works even better than before.
Yeah I bought the cheapest mountable laser I could find, and to be honest, I didn't even calibrate it. I just slapped it on there and it shoots down right :P. I imagine that the straightness of the mount varies a lot from printer to printer when you take into account material, temps, calibration, etc...
Any chance u guys are printing n selling these? Dnt have access to a printer
@@khareemcarr8247 They are quite time-consuming to print and assemble and on top of that if you bought one you would need access to spare parts as things may break over time. I completed one for myself and then after the bugs were identified and fixed. I then built one for my niece's twelve-year-old son. Choosing the best rubber for your model is a personal choice. There are also models with 4 pieces of rubber. Two on each side which would make it even more powerful. But. It would also put more stress on the frame. Another alternative is to make the bow longer or just bigger overall so that longer pieces of rubber can be used. This would make it more powerful but the larger size would make it much stronger. The bottom line is this; The final cost to the buyer to order one with the spare parts would be the same as a cheap printer.
@@novakinb After a while I got the feel of how much "drop" there was from the laser scope red dot to the actual flight of the bolt over different distances which saved time adjusting the scope.
Nice video
Donde se puede comprar? Gracias
Cool! I would like to see 3D printing scale up to full power compound bows
what crossbow bolts did you use? link? I printed one, but the bolts I ordered are too big
Found them on ebay, just regular pistol crossbow bolts. Steel tip, aluminum shaft, plastic fetching.
It's all in the PDF file. 6.3 or 6.2 inch length. Makes around 160mm. Maybe you have 6.5 inch bolts. That's already too long.
@@mmarsian I have those pistol crossbow bolts and they work very well. I have also used 6mm diameter bamboo skewers which originally bought as a pack containing 50 x 900mm x 6mm. I cut them to a length that went the entire way from the exit to the back of the magazine. This meant the Legolini became a front loader in this case. Worked quite well and the part I liked the most was they could be sharpened with a pencil sharpener and when using a cordless drill I could sharpen a dozen in no time
Any chance u guys are printing n selling these? Dnt have access to a printer
Let me show you its features!
This comment hits me on a spiritual level lol
Let's see how much shit we can tear up. Buy a Jeep.
that's in va too I'm sure he lost his license
That poor suburban!
Matthew Norloff heh heh
Okay, that was pretty rad
DeanoTXR53 ^___^ thanks!
Was that supposed to be a safety inspection?
R they got fired?? At least.
Your car did not need any mechanics. I think you must be hearing things with your car. What are you smoking? You will be charge big regardless if there is an issue or not with the car. Your wasting their time.... I didn't SE any inspection at all because your car is fine stupid and the mechanic have to keep your car as to one hours time. Everything is charged on hourly when it comes to diagnostic and inspections....
What
Urgh, what a bunch of scumbags...
sweet potato cannon
Quality seems pretty good for the price. Went ahead and bought one.
:D
What did u use to record this? It has really good sound quality. I do remember someone taking videos with a gopro.lol And gopros usually have good sound recording
Oh shit I actually see my friend and I starting at 4:10 haha. I'm in the white head band to the left of that girl that got up on that guy's shoulders.lol
My old Nokia Lumia 920 Windows Phone. Nokia is one of the only companies that uses the HAAC (High Amplitude Audio Capture) microphones in their phones. Also PureView camera sensors/lenses are sweet.
Sean Lee Didnt i smoke a blunt with you that night? I had on a gray high life hoodie
42 7 I know someone did.haha U had like a couple other blunts on deck right?
Sean Lee No fucking way! I had like 4 fat ones. I remember i had a little roach that wouldnt light so i passed it around and told everyone "if you can light it, you can have it"
Eric new hair?
songg nam?
dag yo
That set has an amazing fucking sound system. Damn, I wonder how much it would cost to get a system like that.
Jupiter Well over $30K.
IM SO JEALOUS.
hope you didnt pay them or even got your money back . this is why i always stay at the entrance now when someone fix my car so i can constantly watch what they are doing . so what happened next then ?? bit they felt like shit when you showed them the footage
Yup! It worked the first time. Only one of the PCB traces ended up being 'sketchy' so we used a small piece of wire to solder and repair the trace. Etching took about 15 minutes of waiting while agitating the etchant and wiping of the board periodically. It is supposed to etch much faster if the etchant is warm instead of room temperature.
Cool. The last part is even cooler. You should make a 'how-to' video on the PCB deal. Did it work the first time? (with the first magazine you tried?) When I did that, it took FOREVER to etch.
so when can u make me one?
can u make me one of this please Im a TKE.
ok Im rlly intrested in it. when can u make me one? plz email me JDTKE578@gmail.com
send me an email with the quote - JeffyDavid@gmail.com