Видео

would be nice to know how to take them apart so the flooring people can lay the new flooring.

My sectional was set up wrong. I need to disengage it and not sure how. I have a corner piece detached but the other side is proving difficult. Any ideas??

I assume do the reverse of what he's doing to dismantle 🤷🏻‍♂️

You can't see anything

You don't show what you are doing when you stand behind the sofa.

You guys are on point.

Where can I purchase the gray marker? I have the Flexsteel Plymouth bedroom set.

So @0:52 notice how the zipper side of cushion is facing out...why? Are they hiding a stain?

I prayed many times about what to do about getting my assembly out of order then not being able to remove the back. Almost in panic mode. Went to bed and next morning, hit RUclips. Thank You!!! My back thanks you!!

Excellent video!!!!

How do you take them apart?? Please help!

But how do you work the wireless?

Where did you get the replacement unit?

Great vid but how do u take them apart

I brought a flex steel recliner May 2022. The seat part cushion lost the memory foam bounce back feel. Meaning it felt like there was a hole in the seat of the recliner. Then due to leaning to one side because of the "hole" in the seat. The cushions on that side of the chair started going bad. The furniture store I brought the chair from did add more cushion to the seat of the recliner but it only lasted about a month and a half. Then we were right back to feeling like there was a hole in the cushion. Now two nights ago the motor stopped working leaving the recliner in a half closed position.😐 I paid $2000.00 yes TWO THOUSAND DOLLARS for this recliner. The most I've ever spent on a recliner. The biggest and most expensive piece of 💩 I've ever brought. I think we have past the lemon 🍋 stage! NEVER AGAIN! Will I buy a FLEX STEEL. IT'S A STEEL ALRIGHT. THEIR WARRANTY is just about as valuable as the paper its written on. Actually the paper has more value to it than the warranty.

Si están montado como lo despego de la parte de abajo

Awesome video!!

How does the wireless tray work?

Thank you! I put the back on wrong. Your note on the spring clips was a lifesaver!

Great instructional video! Can you provide some specifications on the heat gun you like to use (i.e., wattage, temp range, etc)?

Thank you!! I needed to figure out where the power was

Thanks for the help! Just got a new sofa. I put the back bits on wrong way round couldn't get them off cheers man.

I just did something similar on my couch recliner yesterday! My mechanism is a little more toward the inside of that rail. so I ground out a u shaped hole to allow mechanism to swing through. but I love the washer idea! I was baffled as to why the outside is hitting but the other side of the chair isn't. I bet it is up in the seat box that I can't see. My arm rest is also free floating. none of the mechanism arms seemed bent. thanks for documenting your fix ideas. The hardest part of finding videos like this is knowing what to actually search for! but I'm glad I found it.

This was helpful, please speak a little louder & a light aimed @ you attaching the lower power cords together would be helpful also…appreciate you taking the time to show ppl who need guidance 👍🏾

Thank you so much had no idea how to do it now know

I want to see how you take the back part off

Where do you get the buttons? Can you use something different? We lost two of ours and it no longer reclines

Thank you for this video. We have a Flexsteel sectional and love it but have had issues with a middle section with this lever. So is it just the two screws? We have had the handle come off and the tech used four screws to fasten it back on, but it recently came loose again, with the screws falling out. Hoping for a way to resolve this. Maybe longer screws? Or larger size?

Just did some preventative maintenance on my sisters 2 eight-year-old recliners. I can vouch for the quality workmanship of their products.

What brand/model is that couch?

I just experienced this today. This video was very helpful. Thank You for posting this!

I recently purchased and received my Flexsteel Henry leather recliner. I was not home when it was delivered, but there was someone there so that my recliner could be delivered and setup. When I got home later that day I went to try out and relax on my new recliner. First thing that was obvious to me, is that the backrest is not even. One side is at least 1" farther back than the other side, creating a backrest that is not completely flat and even. I thought that maybe the delivery people didn't install the backrest correctly. So, I removed the backrest to check it and reinstall it, thinking it might been installed incorrectly causing the misalignment. Unfortunately, the backrest was installed properly, and the problem is caused by something else. I called the furniture store that I bought the chair from and spoke to one of their repair technicians. I explained what the issue was, hoping he would tell me how to fix, adjust, the backrest so that the it sits evenly and not at a slight angle. To my surprise, he said that that issue/problem is quite common with Flexsteel recliners, and there is no fix or adjustment to correct it. Why, I asked? He said that that's how Flexsteel manufactures and assembles their recliners, often the recliners have a misaligned, uneven, backrest. He also told me that furniture store owners and repair techs have voiced their concerns to Flexsteel, asking them to do better and correct this flaw. Unfortunately, Flexsteel continues to produce recliners with that KNOWN flaw, and they have done nothing to address that problem and correct it. Had I known that this flaw is common, and the my recliner could have this problem, I would have either not purchased a Flexsteel recliner, or I would have stipulated to the store that if my recliner came with this flaw, then they would have to order a new one, until I received a recliner that has a properly manufactured, and aligned with an even and level backrest. This flaw is absolutely unacceptable for a recliner that costs $2000+, depending on where a person buys it from. I've tried to contact Flexsteel, but there isn't a phone number to call, nor an email by which to communicate with Flexsteel. I was only able to post a question on the Flexsteel website. The response I received did not address the recliner's problem. The reply said that I should contact the furniture store where I purchased the recliner. I have, and nothing can be done by them, and Flexsteel doesn't even want to communicate with their customers to help out. Very, very disappointing, especially for a American manufacturer.

Is the ottoman attachable with a C-clip like the other sections? Can it be configured like a chaise?

question, if there are multiple artificial layers applied over the leather, doesn't that just mean the leather is a substrate... and now you have to worry about those top coats delaminating, peeling over time?

Great educational video!!! I recently started in the furniture sales business so im soaking up this free education to help my customers better under and the uniqueness of this brand and style.

Are the covers machine washable?

Is this the 6 seat?

Westside sofa

Westside

Where is the home button on the 10-button remote that returns all moving parts to the original position? Where can we find an operating manual? We bought two charis and they came with no operating instructions.

sorry but this is the BEST FABRIC ever have this what they is TRUE 100%

I bought at Kashmira Digby sofa (dark red color) and two recliners (dark brown) from Flexsteel 10 years ago. This fabric is amazing. You really can wipe off stains with a wet cloth. I'm looking to replace them only because the recliner arms are showing a bit shiny from heavy use. Note - Kashmira fabric is expensive - more than leather - but they'll look new for a decade.

Wanting us to think that mud and Goat Feces just "come off" a couch like this is insulting to the intelligence of everyone who watches this. If it was 1950 and your audience did not understand how edits and video production trickery worked this may have been a success, but its not fooling people is it? Like, we have seen star wars, we know light sabers are not real, and neither is this video.

I wish I could find a video on how to take our Flexsteel reclining sofa apart to replace the Dualflex spring that broke on one end. We moved and can’t get a repair man any closer than 120 miles away. We have the part but no idea how to do tear down or install.

Anyone know what kind of power adapter this takes?

1

First

Hello. Need help trying to find an adapter/transmitter for the flexsteel gaming chair. Any advice?

globally sourced !.. how can you beat that!