- Видео 68
- Просмотров 32 461
CuCo CNC
США
Добавлен 2 фев 2022
My channel is focused on CNC machine software or as a CNC Programmer, I called CAMs Software. I have used GibbsCAM, FeatureCAM, EspritCAM, MasterCAM, SolidworksCAM, and Learning SolidCAM currently.
My best knowledge is GibbsCAM, so I will do tutorials on GibbsCAM mostly, but sometimes I will do EpritCAM and SolidCAM as I learn more in the future.
Most of these are self learned. So, don't be shy.... you can learn by yourself too....
Subscribe to my channel and hit that like button to support my channel.
Thank You!
#cucocnc
#cnc
#cncprogrammer
#gibbscam
#espritcam
#solidcam
#cncmachinist
My best knowledge is GibbsCAM, so I will do tutorials on GibbsCAM mostly, but sometimes I will do EpritCAM and SolidCAM as I learn more in the future.
Most of these are self learned. So, don't be shy.... you can learn by yourself too....
Subscribe to my channel and hit that like button to support my channel.
Thank You!
#cucocnc
#cnc
#cncprogrammer
#gibbscam
#espritcam
#solidcam
#cncmachinist
HOLE FEATURE/FEATURE RECOGNITION IN GIBBSCAM.
This video will show you how to use hole feature in Gibbscam (Or some may call feature recognition). This is very handy when you have a lot of odd angels holes or feature you need to make or drill.
Plus, there is a tip for you to do BEFORE you drill a hole at an angle so you don't break the drill/tool
REMEMBER to subscribe and like my video if its helpful :)
TURN ON notification for future videos also :)
Plus, there is a tip for you to do BEFORE you drill a hole at an angle so you don't break the drill/tool
REMEMBER to subscribe and like my video if its helpful :)
TURN ON notification for future videos also :)
Просмотров: 78
Видео
ENGRAVING ON A LATHE WITH C AXIS
Просмотров 1193 месяца назад
This will show you how you can do engrave on a lathe with B or C axis and live tooling of course :) Hope you learn something here.... :)
HOW TO USE SPOT DRILL CORRECTLY, GIBBSCAM.
Просмотров 1474 месяца назад
This video will show you information the correct way, best practice to do spot drill and drill a hole. Extra information on reamer as well so make sure you watch video until the end :) Please subscribe to my channel if you are not yet doing so :) Thank you. #gibbscam #cncprogrammingtraining #cncmachine #cncprogrammer @cucocnc
Polar Cylindrical Milling, GibbsCAM.
Просмотров 2245 месяцев назад
This video shows you how you use polar and cylindrical Milling option for better, easier to program. Have a bonus 4 axis toolpath and how to setup 4ax rotary table so watch until the end :) #gibbscam #cnc #cncmachine #cncprogrammingtraining @cucocnc
CÙNG BA VUA DÂNG LỄ VẬT
Просмотров 1487 месяцев назад
CÙNG BA VUA DÂNG LỄ VẬT || ST: Lm. Phong Trần Thanks to: ruclips.net/video/PFaNklZyAC8/видео.html&ab_channel=KARAOKEThánhCaCôngGiáo-FullHD #karaoke #nhacdao
SOLIDCAM LESSON 1, 3AX PROGRAM FOR CNC MACHINE.
Просмотров 988 месяцев назад
My first lesson of new CAM software I am learning, solidcam :) This is for 3ax cnc machine, hope you like it....Stay tune for more :) Subscribe and turn on notification for future videos :) #multiaxis #cncmachining #cncprogrammer #solidcam #3axis #machinist #cncmachinist @cucocnc
GIBBSCAM 2024 IMPROVEMENTS.
Просмотров 2828 месяцев назад
The video shows you some of improvement in 2024 version that I think it will be useful. #cncmachining #gibbscam #5axismachining #cncprogrammer @cucocnc
MULTI AXIS ROUGHING WITH GIBBSCAM
Просмотров 4568 месяцев назад
The video will show you how to use multi axis machine to rough material. #5axismachining #cncmachining #cncprogrammer #gibbscam #multiaxis #cnc @cucocnc
MULTI PASSES/ STEPS DOWN AND AXIS SHIFT ON SWARF TOOLPATH - GIBBSCAM.
Просмотров 2708 месяцев назад
The video will show you how you can cut multi steps down in swarf toolpath in Gibbscam, plus you will see option to cut deeper than surface/ swarf surface for better/clearner finish. #5axismachining #cncmachining #cncprogrammer #gibbscam @cucocnc
2ND OP2 FOR 5AX PROGRAM TO FINISH THE PART
Просмотров 10310 месяцев назад
This program is just machine 3ax but it will do 2nd operation of my previous video to complete the program for this part. Please subscribe to my channel and turn on notification to help the Channel :) Thank you. #gibbscam #cncmachining #cncprogrammer #5axismachining #3axis @cucocnc
STEP BY STEP HOW TO MAKE PROGRAM FOR 5AX MACHINE, GIBBSCAM.
Просмотров 30310 месяцев назад
This detail video will show you how to program a 5ax part, it is included 3 2 and simultaneously 5ax tool path. It is long but very detail so you can follow to make your own program if you watch all the way. #cncmachining #gibbscam #cncprogrammer #5axismachining @cucocnc
PART 2, 2ND OP FOR 3AX PROGRAM USING GIBBSCAM.
Просмотров 12411 месяцев назад
This is 2nd OP, finish programming the part. #cnc #cncmachining #gibbscam #cncprogrammer #cncmilling @cucocnc
LATHE STEP BY STEP, HOW TO MAKE CNC PROGRAM USING GIBBSCAM
Просмотров 99111 месяцев назад
The video show you how to setup and make simple lathe program using gibbscam for CNC. #lathe #cnc #cncmachining #2axis #cncprogram #gibbscam #cnclathe @cucocnc
STEP BY STEP FOR BEGINNERS, MAKE PROGRAM FOR CNC 3AXIS MACHINE WITH GIBBSCAM
Просмотров 23011 месяцев назад
The video will show you details of how to make cnc program for 3axis machine. This program will show you all the tool paths I have made to complete milling a part. #cncmachining #gibbscam #cnc #3axis #milling #cncprogrammer @cucocnc
SETUP, SETTING AND UI/INTERFACE OF SOLIDCAM 2022
Просмотров 155Год назад
This video just show you how this CAM software looks like, how to make simple setup to prepare for your programming. @cucocnc #solidcam #cncmachining #cnc #cncprogrammer #cncmachinist
CLEAN UP FROM PREVIOUS TOOLPATH, VOLMILL IN GIBBSCAM
Просмотров 221Год назад
CLEAN UP FROM PREVIOUS TOOLPATH, VOLMILL IN GIBBSCAM
USE 5AX MODULAR IN 3AX MODE/MACHINE, GIBSCAM
Просмотров 139Год назад
USE 5AX MODULAR IN 3AX MODE/MACHINE, GIBSCAM
Tip and Trick Part 6, Multi Parts in Gibbscam
Просмотров 285Год назад
Tip and Trick Part 6, Multi Parts in Gibbscam
TERMINOLOGY OF CNC MACHINE AXIS.. 2.5 AXIS, 3AX, 4AX, 5AX IN CNC MACHINE WORLD.
Просмотров 268Год назад
TERMINOLOGY OF CNC MACHINE AXIS.. 2.5 AXIS, 3AX, 4AX, 5AX IN CNC MACHINE WORLD.
HOW TO SAVE PROCESS, LOAD PROCESS IN GIBSSCAM
Просмотров 254Год назад
HOW TO SAVE PROCESS, LOAD PROCESS IN GIBSSCAM
DEBURR PART ON 3AX, 4AX AND 5AX MACHINE
Просмотров 195Год назад
DEBURR PART ON 3AX, 4AX AND 5AX MACHINE
COPY MACHINE SIM, MDD AND/OR POST WHEN UPDATE GIBBS TO NEW VERSION
Просмотров 150Год назад
COPY MACHINE SIM, MDD AND/OR POST WHEN UPDATE GIBBS TO NEW VERSION
Making mistakes through a tutorial is not ideal for students learning. Start over if mistakes are made during the recording.
Seria bom se tivesse um vídeo ensinando como desenhar no Gibbscam, a maioria dos vídeos são de programação
If google translate good...you want to know how to draw, like 2D print? I have some but if you need I can make one to show you how you can draw 2D and make 3D in gibbscam :)
❤❤❤thank you for sharing ❤
Thank You For Responding so quickly, Your The Best
Could you do more swarf milling on 5 axis ?
Hello, what is the version of your GibbsCam? Thank.
This is old version...13. But any version will work much the same
Hello, do you speak French?
Hahaa... I wish :) No, I don't speak French but I can speak vietnames :)
Hello, do you speak French? Are you Vietnamese? What is the version of your GibbsCam? Thank.
Thank you for the videos, can you show Gibbs Cam cylindrical engraving on a C axis lathe like a Doosan puma? Thanks
I don't have that machine but can research and will do on lathle with C axis....stay tuned :)
Here it is... ruclips.net/video/5oXq1APbb_I/видео.htmlsi=9XxrIHZXzWR3fq1N
Long time my friend thanks for the video
thanks!
Hey brother, can you do a demo on how to import an image from logo to Gibbs cam?
Oh...I dont know if you can import a pic to Gibb though. If your file is in the drop down list when you import and then it will support, if not then maybe it will not let you. I have never import a pic/image to gibbscam so no exp here :)
Thank you for the video
Hey brother, could you do more of Gibbs training?
If you have anything you want to see...please cmt down there and I will make video for it :) thank you.
New video got up...check it out :)
ขอบคุณครับ
hi, do you have a file for lathe machine
Sorry I don't have any machine sim for lathe.
ok thanks@@cucocnc
Can u upload file of haas v4 configuration
www.dropbox.com/scl/fo/v4qsy6wdi3f0hxgd7lo3r/h?rlkey=fbmhtmzqcm40c5wfw20odswaw&dl=0
@@cucocnc can u provide me email to reach u with some problem i got
@@cucocnc sir can u provide me a file o the machine in forme of GibbsCAM Part File (.vnc)
If you copy the mdd to folder...you can just select the machine on the list in yr part file/program.
@@cucocnc many thanks
Nghe ghê VL
I learned so much from this video even on Gibbs 2014 Thank you!
Glad that help...any version is much same concepts.
thanks. How did you change your tick-boxes in blue color? Is it a Gibbs appearance option? or is because of the Windows version you are using?
You mean 3d model turns blue? It's Gibbs color. You can change to what color you want. I never really care...move yr mouse to model, right click...body type...stock is blue, fixture is red.... part is gray
I mean the checkbox. The little square you tick to select some option on the toolpath, like for example turn on coolant or Cutter radius compensation and so on. It might be just a Windows appearance setting. On my Gibbs are just black and white..there are not so obvious and I wanted to know if there is any setting you did for that or it just how it looks.@@cucocnc
@cristinelpricop those check boxes is Gibbs's color. The coolant check box and stuffs below that depends on your MDD. If yr mdd has thr coolant or thr air... then it should show up for you to check or un check. Mine is always black n white also :)
Can you show us how to do a MDD please.
I do not know how to made MDD though :)
Mr. CuCo, Can I have your email?
How long have you been using GIBBSCAM ?
It has been a while with 3ax, 5ax is only couple years :) I don't have full 5ax works alot here so just playing here and there.
Mr. CuCo, do you have an email? I do have couple things want to ask you about 4 axis polar mill. Cam on
Jhkc2003@yahoo.com... ng viet ah` :) nếu biết sẽ chỉ :)
Thanks for the videos
Thank you for the video
No problem :)
Can you do some 5axis roughing pls
Like a full 5ax? If 3 plus 2 then I already have video for it. If full 5ax...yeah sure I will do 😀
Cuco CNC your videos are great don't worry about your English I understand you perfectly thanks again.
ad ở vn ah
Hihii... không ah.
Can you do a demo on dwarf milling for 5 axis ?
You meant Swarf Milling?? I have a few videos for that but maybe I will do more details just for swarf toolpath. Stay tune.... :)
Thanks for the video, just how change the orientation of the circle? Cause the engraving is on the front/face of the circle, no on the side. Thanks for your support.
If you have round stock like that and you want to engrave front face? If you do 3ax machine then you stand that round up and do engraving. In GibbsCAM you highlight the face...right click and select align face...the option just under extract geometry....therefore that front face will be up and you do yr engrave.
Can you do a Island engraving?
Island engraving? What do you mean? If I understand correctly, you want yr letters pop up like islands? If that case...it's more like milling though...not engrave anymore.
Yes sir, I did it with milling polar and finish area between letter to letter @@cucocnc
@@batruong7681 Yes, that should be it.
Awesome! Thanks!
Hi could you please make a tutorial on how to create and build machine sim. Thanks great videos!
Ahh..I don't know this :) unfortunately.
Hi, great videos. Can you make a tutorial for Intermediate Tooling for Tool holders in Milling machines please?
If you want to see rendering/simulation with tool holder.... I have video for that. I will do 5ax video later on and in that will be included also. So, stay tune and look for that.
Hi JT. Thank you for tutorials! Love them. Can you make one with lathe turning 2 axis?
I am not a lathe guy but ran Mill-Turn before using EspritCAM. Concept should be the same...I will make video on Lathe and you can watch it :) Thanks for watching my videos.
Here it is....ruclips.net/video/sQs68CjaeEQ/видео.html
Awesome!
Thanks!
great speech
😀😃
Good video, Thanks for uploading video and showing us.
Glad you like it... :)
Do you know how to import geometry from an image into gibbs? Or if Gibbs is able to do that?
If it is cad file then yes...if png, jpeg...then no. You can try by go to menu...file...import...then select the file you want to import in.
Okay, thank you
Nice! Can you do a demo using a ball nose to deburr edges in 3 axis?
Ball nose tool to deburr on 3ax? Why do you do that? Can you give me example? or Explain what do you want to do? Because if just deburr or chamfer then use chamfer tool
@@cucocnc just want to see how would you deburr sharp edges on a part
@@riamhmoob2561 I see. I will do a video deburr 3ax, 4ax and 5ax. Please check back few days :)
ruclips.net/video/rf-4GmE1laQ/видео.html&ab_channel=CuCoCNC
Great video. It was very helpful. What is the difference between changing the solid model type from “stock” to “stock display only”. They both turn the body blue.
If you turn "stock to display" it's only for show. If you turn to "stock" be careful with this because sometimes you use model as stock to make yr program and it looks at that is the STOCK. In short, if you just need to render yr program to see if anything wrong with yr program then turn stock display only.
@@cucocnc very good. I’m still learning basics. Thank you. Keep up the good work.
Can I have that MDD ?
I can't give you this MDD since its my company property. I have to ask first, I just don't want to get into trouble. :)
Thanks for this video it came in handy for me today for that round stock.
That's great!!
Make more videos, Coco
You watched all my videos?? :) I will think of something to make :). Thanks for sub to my channel and watch my videos.
Yes
@@riamhmoob2561 If you have something you want to learn, cmt here and I will make video for you :)
Awesome!
Thanks.
New trick for me. Thanks CoCo
Glad that helped :)
I like
Keep doing a great job! You need to research promo sm!!!
Helpful video. Thanks!
Glad that help.