Видео

People with 3 fingers invented pushing sticks 😂

Sketchy asf my guy

Drop the blade down just above material thickness. Less chance of injury

No no no no ...that will sound awful when you walk on it wheres the underlay 🤔🤯

Choosing flooring like this should = 3-5 without parole

Kolay gelsin dostum

Yes lets break/weaken the fins so in a year they will be all popping up.

Por que no tapa la cosina o la remueve ?

Don’t use adapters or extensions to the socket. That should helps a lot too.

Should of put anti seas on before twerking the nuts down?

Pro tip from my father who was a mechanic- get some wd40, let it sit for a bit, then tighten the bolt to break the rust, then loosen it, ta-da

Get a cutting torch, it can't be stuck if it's a liquid.

get one of them new fangled ones with power cord and a angle head ,spin your house around if it sticks.

7/8 inch spade bit works better than a hole saw.

Gih dat men a ryobi

Milwaukee Right Angle Drill or Hole Saw with a Forstner bit, 20 seconds max. Hold on or it will break your arm

Trying to cut thru nail I can hear it . GET DeWalt Drill and battery it will do it !

Is it big enough? Doesnt matter it will be fried in two minutes. Must have a box of them on hand..

Is this a new tim and eric bit?

Bye bye hole bit

I bet the drill bit broke at the 4th light

Just a tip from a young ex electrician if your willing? Look up the carbide grit recessed whole blades. They sorta look like a sandpaper edge. They are so much easier on your wrist and just generally a life saver bc they can't cut wires. 🫡 They also make flexible bowels that last a few years if youd like, rather than those stiff cheap plastic drywall dust catchers.🤜🤛

title should be "lets go get the battery charger"

aguante ryobi.

On a nail

Ahhh! Squint and big inhale!

Porqueria los taladros Milwaukee luego se descargan y se sale la bateria

big freakin deal

Yuksel bey kolay gelsin

Stop breathing that in

Birde ben olcam orda ne projeler yaparız elinize sağlık

Daha nasılsın iyisisin oradaki arkadaşlara selam söyle

Kolay gelsin Allah kolaylık versin selamlar

❤❤

❤❤❤❤

🎉🎉🎉🎉🎉🎉

Nice 👍

Puja Pande🎉🎉🎉🎉❤

Not a pro

I use my hands. Only tools needed is a knife and blades.

This is Rob Villa. Bob was outta town

As a contractor I always use a thinner prybar to get started. And you need to run a knife down the caulking at least on the wall side to keep the drywall from peeling when you pull off the casing. Unless of course you’re going to remove the wall or make the opening larger. Good luck.

All wrong and terrible technique

I always use the other side of the prybar.

looks very nice!

What a dummy

Dude this is NOT good

The SHORT pry side with a little Finesse....Brutal Bob Villa!!.. 😎

I think I wasted y brain cells by watching this video 😂 but he is doing a good job

save that wood they don't make wood like that anymore