Видео

Thank you for the comment I'll look into making different types of videos

These are some of the first short videos I ever made. It takes them getting used to holding the camera that way.

I am not a teacher or am I teaching anyone? I just put online what I do and hope that it helps somebody in what they do. I actually learn more from people like you that comment. Thank you for teaching us.

Thank you for your comment

Thank you for your comment. I am not teaching anybody. I am just putting online what I do. I actually learn more from the professionals like you who comment. Thank you for teaching us.

When you pull out the old one, try to pay attention where it’s at when you put it in line the slot up and then line the part up if that makes sense. If you have any more questions, let me know.

I didn’t know you could get them so cheap. Thanks for letting me know.

Thank you for your comment. This channel is for learning and teaching so I appreciate you letting us know that we cannot use that wire outside. I did not know that when I made this video I found out it was supposed to be single strands.

Yes if the hot/ cold blend door motor is out

I hope that your problem let me know. Thank you for the comment.

@@texasnow3511 There are at least four different part numbers listed for the thermostat gasket for this car. I had the one that came with the kit and leaked and then I bought one from Amazon which was too loose-fitting and got pushed out from one side, and finally, the one that worked was FEL-PRO p/n #38445. While I was struggling with problem I noticed the previous owner had used Permatex sealer to get around this problem. Thank you again your post showed what the real problem is and how to correct it, otherwise, I would have gone the permatex route. people like you make RUclips such a great resource.

👍

Yes

@@texasnow3511 Thank you for the confirmation

Definitely saved me some frustration. Thank you for your comment.

I believe it works. I will try to make a video on the pros and cons of this unit sometime this week

@@texasnow3511 Sounds good and interesting

Thank you for the positive positive comment

Thank you for your comment. It is a button on the back of the unit that opens and closes the arms.

Thank you for the comment. I believe on the 2012 they are both the same part.

I believe it cost me like $20 on Amazon or eBay

The third brake light connector on the door?

@@texasnow3511 yes on the door

Same here I bought this car and driving at home. I started hearing the clicking noise.

Actuator

Blend door actuator

That’s a tough one. The only thing I can think of maybe they left some thing in between the condenser and the radiator a piece of plastic or piece of cardboard they put there to not damage the radiator or the condenser.

You could also boil a pot of water and put your thermostat in there. See if you’ve got a faulty one it happens.

Bare wire?

Thank you for your comment I appreciate it

?

No a freestar a mini van

Get a power probe and put power on one side negative on the other

When you take it out, you can leave it hooked to the car and just hit the button up and down

Leave it hooked up to the car and hit the button up and down. See what it does.

Thank you for your comment

I'm glad to hear it that's why I make these videos thank you very much for your comment

I bought the mirror on eBay

On eBay

That’s awesome I’m glad my video was able to help you

I’m really glad my video helped you thank you for the positive comments

Yes lol I am not an electrician. Please let me know what I did wrong so others do not make my mistake.

TEXAS, YOU DID WELL, I ALSO MADE MANY MISTAKES AND VIOLATIONS WHEN DOING ELECTRICAL. JUST BE CAREFUL AND ALWAYS DO THE BEST WORK, USE THE BEST MATERIALS AND ALWAY THINK SAFEGUARDING THE PUBLIC AND YOURSELF. CHECK THE LISTING OF ALL THE EQUIPMENT AND MATERIALS THAT YOU CHOOSE FOR YOUR PROJECT. REMEMBER, INDOOR AND OUTDOOR EQUIPMENT & MATERIALS ARE APPLICATED PER THE ENVIRONMENT. FINALLY, NOT ALL ELECTRICIANS ARE ALIKE. TAKECARE AC

Thank you for your comment

Thank you for your comment

Thank you for watching

All of those outlets are connected to a GFI switch. Thank you for your comment though we are all here to learn from each other and I appreciate you teaching us

@@texasnow3511 oh ok gotcha my opology

@@texasnow3511 you got it set up like how I set up my garage 😏👍👍👍

The devices still must be weather resistant. There is an abbreviation on weather resistant devices. (WR)

Texas Now my issue was the same my horn was stuck on, so I just took apart the Airbag/Horn. I had slight continuity(short) with the Air bag in place with the horn switch. When I removed the air bag the short went away. I did not remove the switch, I poked around for a while, jiggled the switch around and could not get the short to reoccur. So I re-installed the air bag and checked again. Short was gone. Re-connected the battery and horn is now working properly. Thanks for your quick video. I still would like to hear what you did when you took the horn switch apart to resolve your problem.

Sorry about the delayed response when you take the horn switch out it is basically 2 pieces of conductive material I split those 2 pieces of apart and clean them with alcohol and then glue the edges back together With rubber cement

Yes it works great

@@texasnow3511 Awesome! Thanks for putting that video up, game me the confidence to do mine and it works great

Yes

That is true you can buy the modules much cheaper now but they're not as well built as the originals

What is the part called?

I'd like to know where you get them for few dollars cause they are over 50 bucks

Thank you for your comment

The liner is holding up great my kids kick off the wall and it doesn't seem to affect it at all

@@texasnow3511 Perfect, Thank you👊

Thank you for your comment if you have any questions Send send them in

@@texasnow3511 well got it in and it works! Thank you for the content, very helpful.