Видео

Bro, I was struggling for sure! Kept looking up images and being directed under the steering column but just kept missing the button. Probably fueled somewhat by frustration. Doing something small like posting this video documenting your solution for the next guy is what it’s all about. Thanks for putting this out there. Saved me from gray hairs and doll hairs

Thank you, sir!!! You bought my first home... was so easy to change it.

What if the TPMS light is already flashing when I turn on the car?

How did you make this?

Thank you dude

😂😂😂 sos un crack!! Yo estaba como loco, no sabía como ponerlo o quitarlo. Ya que me fallaba la app y las órdenes se mostraban tardías 😂. Gracias bro

Thank you very much for your help!!! ❤

That was not nailed! That was a 3 pointer!

Hi Andy. Could you please list what you used to build the storage system for the drainage? Im running into the same problem.

You in Orange County

Stadion luar mewah2.. Mungkin klo ada 7 stadion kaya gini indonseia bisa jadi tuan rumah piala dunia level atas

Thank you. This was very helpful! I appreciate how you explained the process.

Great instructions, thank you!

Excellent video. Clear & concise. You saved the day thanks!!!

Great idea and thought! Thank you!

R you sure it is not drain hight issue?

Don’t beat this guy up. How many times have you seen a utility sink capturing the fast flow rate of the washer. And taking a moment to catch up. This is normal for old houses. Be careful tearing up those old pipes with chains and more.

Looks like you are pretty good with plumbing, congrats! I have an issue with my drain hole for washer discharge pipe - it is overflowing sometimes causing my basement flooding, it's not because of water from washer like in your case, it's because the waste water from outside comes right into my house when it desires, how do I fix it? Back water valve, any ideas?

Thanks for this, same as other comments, I thought I was going mad trying to find the reset button, I have a bad back at the moment so I couldn't👍 do too much investigations in a low position, your extra directions led me to the button.

😢

My washer machine & water softener stand pipe does not have a P trap…

Hi， may I know what’s this

Thanks, any idea why the Starter and Thermal Overload go bad? I changed them and it cooled again but then they went bad again.

This Machines turn 1000 rpm per minute & you can not put the drain hose in the drain pipe more than 5 to 6 inches! I had the same problem called a plumber & said I will unclog the drain for $739.00 I thought about it said said no thank! The machines come with a long drain house & the installed it either 15 inches the hose in the drain pipe! I took it up to only 5 inches secure it so it will not come back out ! Problem fixed 😂😂😂😂😂😂

Holding the button on mine did nothing.

I had the same problem. My solution was to simply jam a 3/4 inch PCV threaded stop into the washing machine drain line. The threads are a nearly perfect fit for the 1" flex line he used in the video. I then put a 1" drywall screw through both flex pipe and plug for double security. Finally I drilled a 3/8 hole in the plug to reduce the water flow. I know that it is a little harder on the washer pump but its better than breaking concrete slab to replace a 10ft run of undersized drain pipe.

there is a button right next to that reset button it says "off" I accidentaly pressed it whats the purpose of it someone knows?

I went and got new tires from town fair tire and they were trying to sell me new sensors because they couldn’t figure it out…thank you for saving me moneyyyyyy

why do you need that trap ???

just put it in ice water mate you will ruin the mulrimeter inside the freezer

NEVER ever do this. It absolutely will not solve anything.

Good

B❤

Thank u

Wtf??

Admiro las cessnas, me gustan las alturas.

Me gusta el vídeo, desde la tierra del quetzal muchos abrazos.

I have a question, I replaced both the overload and start relays, and my wine chiller s still doing the same thing, the compressor turns on, then clicks off after a moment, I filed down the female connections a bit but that didn’t help, any suggestions would be much appreciated.

Would never have found this! Thanks for the video. (what were you thinking, lexus?!)

Only thing to add, make sure you’re not using the hot water, or it won’t adjust. I was running my bath water and trying to adjust it simultaneously. Turn off all water and you won’t have issue. Thanks for the help!!!

This was not easy for me. Only the top piece (Star) came of successfully. The bottom part is connected to a bunch of wires that won’t detach 😩

I thought the most interesting part of the video was the clothing optional beyond this point sign.

I replaced my overload and cap still clicks on and off ...what could be wrong?

Thanks!!! Exactly what I was looking for in how to do!

Hey Andy, good to see you're still wrenchin'. I've recently moved house and have just finished building a new, nevertheless modest, home for the Mondy. I haven't had time, or need for that matter, to do any video's lately. However, I'm hoping to get back in to it in the new year. Merry Christmas and a happy new year to you and your special people. Blessings from Perth, W-Australia Marc

Where is the button to press below dashboard

Thank you very much for the video. Must've taken plenty of effort to do the job while holding the camera. Props!

has anyone had issues making the lexus live view work in the app. the files are there but i cant tap into the live view when the vehicle is on and connected

Thank you, I couldn't find the reset button without this video. The manual makes it look like it should be right next to the trunk trlease.

THANK YOU. I did not have a problem in the past (or I didn't notice it until 3 months ago) and this is a great idea. THANK YOU. I am a low income private school teacher and a DIYer.