Видео

I’m taking multiple designs and putting them together on silhouette studio. You can layer sayings on top of background pen wraps to create your own design.

Thank you

Yes I didn’t even think about that when I did this video but I never used it again. It was more in front of the light not under but yes I was very stupid and didn’t think, I’m just very fortunate nothing serious happened.

You are very welcome. I’m glad you like it!

I’m sorry your lost. I cut the lines out on vinyl and glitter the vinyl and seal the glitter then add the strips onto a glittered tumbler. Does that help at all?

I’m sorry I don’t understand what you’re asking? Green attachment?

Yes however it dries a lot faster then epoxy, so you don’t have a whole lot of time for it too self level. I recommend using more thin coats but a lot of them compared to a thicker epoxy coat.

Thank you 💕

Oh wow I wonder if it’s the spray paint itself. Have you tried different brands or finishes? I remove my tape as soon as it’s just. Sometimes only after a few hours.

I like to do a mix of both because the fine glitter floats slower then chunky glitter. So you get a cascade look. But try out a few different styles and see which you like best!

Hello. Ok no you can’t. Sublimation is it’s own thing and you have a sublimation printer with sub ink and paper plus you will need a sublimation blank which they do have pens plus tumblers ect. Then bake the blank with the sub paper taped to it But I print all my printable vinyl with my laser printer, you do still need to seal it once it’s on the pen because it will come off eventually If you don’t seal it under resin or crystalac.

Aww thank you 😊. I love hearing that! If you have any questions I’m here!

@@devildollcustomcreations I truly appreciate that! I have the paper ordered and on its way! I followed you in Etsy, and you’ll see an order coming from Beatboxtaun soon! ❤️❤️❤️

Oh awesome, I look forward to receiving it.

Awww thank you! 💕

Yes I do it’s under the pen playlist

The font on which one?

@@devildollcustomcreations The one that is done in pink

I will have to go back and watch the video tomorrow, hopefully I can figure out which font I used haha.

creations okie doke!

I just traced a template in printer paper and then used that to cut out my vinyl

The crystalac? Maybe a tiny bit but no not really, neither could be left in a car in summer. You would need powder coated, or sublimation tumblers for that

Yes I used Elmer’s glue. I’m pretty sure you could use crackle medium and crystalac, I just don’t have that in my shop and I try to use what I have instead of purchasing something new. If you use the crackle medium please let me know if it works for you!

@@devildollcustomcreations Oh. I have not tried either method. I just have seen other YT do both & I wanted to see which one worked best. I am planning to make my first crackle.

Good luck and have fun with it. Crackle is one of the easiest methods!

@@devildollcustomcreations Thanks

You’re very welcome

I use Magic Marble Paints from Beach girlz glitters www.beachgirlzglitter.com/

You are very welcome

pink chunky- Shelby from feather bear bling halo pink (with tack it method)strawberry hibiscus 3 from Mr. Nola's glitter

Awww thank you! I love hearing that! If you have any questions I’m always here to help if I can 😁

You can definitely try but I would think you would need the tackiness of the nail glue. If you try and it works please let me know. Thank you

I've been using uv resin with foils today, and it's worked really well x

Yay that’s great to hear!!

Aww thank you that what I love to hear! 💕 yes I use only paper mate InkJoy pens

@@devildollcustomcreations Hi! Just wondering, why do you use Inkjoy pens? Is it because they're easy to disassemble or is there any other reason? Thanks!

To be honest it’s just a personal preference. I really like how they write so that’s what I had on hand when I first started. But I know there are tons of different types out there, as long as you can take them apart, I think that would be fine.

I have a brother laser color printer but really any printer can work but if it’s inkjet you will need seal your paper before adding them to your pens

I actually made a listing on Etsy that comes with 2 sizes of strips that are already tapered if you didn’t want to taper them yourself etsy.me/3XsC2PU

Hi. I didn’t use really any pattern I just cut out thin stripes in the glittery vinyl and just starting wrapping them around the pen. You could definitely create a pattern, cut some stripes thinner then others and go back and forth between the thicker and thinner or even every third be a thinner stripe. 😁

So my tumbler is straight as well, the taper still looks best because it tricks your eye. I do have them already tapered on my Etsy shop to purchase if you didn’t want to create them yourself. I do as many coats needed until it’s glass smooth. It kind of depends on how thin or thick your coats are on how many you will need. etsy.me/3Tw7mtK

And you are leaving them in for a few different full turns? If they are still tacky after 5-6 mins under the uv light. It might be your uv resin, maybe try a different brand and see if it helps

Hi. Yes slightly because when your wrapping them around the tumbler it still looks uneven. I created a listing on Etsy with the strips already tapered ready for you to cut out in vinyl if you didn’t want to create them yourself. Here is the link etsy.me/3fJOBoR

Hi. So most fast set epoxy has a higher chance of becoming yellowish over white especially if it is in the sun for longer periods of time. So I just always error on the side of caution.

@@devildollcustomcreations thank you for the quick response. I bought your file and will start it today (hopefully), if I can locate my non-sublimation cups in my current chaos situation living at my sister’s house

Hi so when you grab the bottom corner you can drag it in a little, don’t grab the side of the strip because then it will make the whole strip thinner. I did create a listing on Etsy if you still are having a hard time that has two sizes of strips with the bottoms already tapered. I will link it here. Thank you Katrina Devil Doll Custom Creations etsy.me/3FPv9Si

@@devildollcustomcreations I just saw on your screen that you have the points window open... You didn't say that. Thank you

Awww I’m glad you like the candy cane hack! 💕

Are you using compressed air to blow dry your dip right after you pull it out of the water? I get bubbles sometimes too but once I add the air they pop or move to a spot to pop.

@@devildollcustomcreations no! I think that might be my problem. Someone told me to just use my finger to pop them and it just left a mark.

Yes try canned air or if you have a compressor or air gun. But be careful because I’ve added it too close to the tumbler and it moved the paints.

Hi thank you. Did you look in the videos description for the website on these pen holder? Look under category on the website

Hi. Welcome. I actually haven’t tried that one yet but there hasn’t been any crystalac I didn’t like haha

Yes I have a few videos on my channel that I use UV resin on my pens.

I’m SO happy you find it informative 💕 thank you for watching

Thank you 😊

YES I use crystalac Brite tone on 99% of all my pens and tumblers. I have a playlist dedicated to epoxy free tumbler/pens

Yay that’s SO exciting!!! If you have any questions I’m here 😁

@@devildollcustomcreations thanks 😊

You’re welcome

Go on the videos description and there is a link!

@@devildollcustomcreations is it 7mm? 4mm? I have no idea. The link doesn't work up top

@SamanthaGray-m5t a.co/d/5vaLvNs

Which font?

You are very welcome! 💕

Aww that makes me SO happy to hear! 💕

I found them I needed to click on catalog

Oh that’s great news! Don’t forget to use the discount code that’s linked my the videos description to receive a % off!

I’m showing how to take an already made pen wrap and how to customize it. 😁 In the future I will post a video on the start to finish how to create a pen wrap!

Your talking about the bottom in the freezer, correct? Once you pull it out of the freezer, tap it on a counter or maybe a little harder if need be, it will pop out

@@devildollcustomcreations yes I did that and even slam it to do it and still didn’t work

Umm weird. Ok maybe try heating it up with your heat gun? I’m sorry I have never had one not pop out before. I hope this works 🤞

I do not but I’m using a laser printer. I know you have to seal waterslides if you are using a inkjet, so I would guess you might need to seal printed vinyl as well. You could always try and see. Sorry if I’m not more help

Yes of course. www.etsy.com/shop/DDollCustomCreations