Видео

what a joke, not automatic at all

What if I have two LL’s and one LifePower V1 and what to add two new LifePower V2 batteries. I already have the update on the LifePower V1 and it works fine with the LL’s.

Are we supposed to remove any pins or wires from the battery com wire to the 1st version Lipo4 from the new V2? Which ports would this wire use?

Finally a firmware install guide 🎉

Great product, except that if you call SolArk, they will tell you that if there is a problem that occurs while using the comm cable, YOUR WARRANTEE WILL BE INVALID.

Does the total rapid shut down also work with Sol-ark?

Does rapid shutdown work with sol-ark shutting down the EG4 LL batteries?

I was also told to buy the Tigo system when I purchased my solar system. I love the optimizers but if the unit I purchased isn't going to work as many people here are complaing about should I even install? I'm multiple Mw hours through my inverter and at this point dont want to install because it seems it is nothing but issues. And I'm off grid. Seems alot of these issues are on grid but EG4 owes an explanation to these issues. They pushed this system hard when I was building.

Can this work alongside the Schneider XW system?

What about the 3k inverter? Can it be added to this same monitor tool ?

You call out 6kW & 6.5kW models @3:12, but those of us who bought the 3000EHV are LEFT OUT IN THE COLD. Please tell us what is going on with that unit as well.

I just got my LL-S yesterday..... I am enjoying peace of mind.... Big thanks to the whole team 🤗

The project was made possible by the USDA REAP grant program and bonus ITC incentives from the Inflation Reduction Act and the solid decision making and resources and property of the owners of Liberty Hill Farm and with support from Chickasaw Electric and the TVA.

On the fence with this and others. They talk like we understand there lingo.

Let’s say you wanted to separate the line set after the system have been put in to service can you disconnect the quick connection and not loose any refrigerant and reconnect it back together and the system would run like normal again ?

Would be neat to have rack mount batteries with heaters built in :)

Is it compatible with the older model? Meaning can I mix/match with the V1 and still have it comm properly with the inverter?

I am interested in partnering with you. I have a huge horse arena/barn in Yuma Arizona with a lot of sun and roof space. How can I contact you to talk? Thank you

Nice, aren't the fire arrestors also a new feature?

there is a trade show in Anaheim Ca sept 9 thru 12 ...is it open to the public ? ......can i get a pass ?

Would it be possible to get a video on paralleling batteries for use with one or more inverters like yours or Sol-Ark?

NICE! I may add more to my current three. They are solid.

What if you don't have a "smart" phone and just a laptop can you still do the update? Also if you but a system (EG6000xp") is all the software up to date? Thanks.

Will this work with 6000xp?

Got worried, at first, I might have overdone my setup when I read the title; my system is 6000XPs and LL-S though.

My 18KPV is STILL consuming power EVEN AFTER it has been put in off-grid mode. My Duke Energy Power Bill CLEARLY shows my 18KPV is STILL drawing power from the grid and is not isolated from the grid. This PROVES OFF GRID MODE DOES NOT ISOLATE THE INVERTER FROM THE GRID! PLEASE ADVISE. The answer to this needs to come directly from EG4 NOT a third party vendor such as Signature Solar or Current Connected. Sadly if you call eg4 for tech support you will IMMEDIATELY be funnelled to your third party vendor. Both the Duke Energy app and the EG4 monitoring apps clearly show consumption in spite of my 18KPV being in " OFF GRID" mode.

Been seeing pictures floating around of this place. I would love to see a full video of this installation.

Great video but I wish you would show how to wire this sucker. I just purchased a new EG4 solar system and am trying to figure this out! But thank you for explaining the benefits of this product!

Do you offer a ceiling cassette style head unit?

What a powerful system and team! 🙌🏻

Any chance of rack mount batteries with heaters in the works?

Amazing!! I'm in the process of installing my EG4 power plant right now, currently 3x18k inverters and 9x powerpros but I'm thinking i should scale to 4 and 12....

Nice

Video did not actually provide any information.

So you don't care if you don't have a UL9540 or a 9540A ?

Where is the video explaining the numbers on the monitor page, PV watts and voltages numbers, the output numbers, so forth. two pv arrays, Paralleled inverters and such. why does pull unequaled from each string? so forth? 6000xp

This feature is huge and probably deserves more than a 2 minute video. Seriously, go deep into this topic, especially about the theory of discharging some batteries while leaving others in reserve vs. discharging them all in parallel. I'm considering a dual 18Kpv system with a minimum of 6 PowerPro batteries and would love to have the option to expand it further. The PowerPro manual makes it sound like you can only get up to 5 batteries in parallel if you have three 18Kpv systems and "systems with more batteries [...] require the use of an external fused positive busbar and an unfused negative busbar rated at a minimum of 200A per battery." Who even manufactures that, and what does it look like installed outdoors?

does the gen boost increase the total AC output of either unit? Or does the unit limit stay in place, just pulling from the generator instead of the PV and batteries?

How do I turn them this off of UPS mode for some reason it starts to charge my batteries from grid randomly

Installing the bonding screw doesn't that require removing the tamper sticker says void if removed?

Thank you for your video, this subject is important and should be clearly explained slowly with better visual aids. Please consider producing new videos explaining why the screw was removed, and that the screw does not make a permanent bound but allows the dedicated relay to switch depending on the input. Also, which driver a new customer (like me) needs to install if want to add this screw and have the bounding feature working properly. In my van I'm planning to install all 110V outlets GFCI, since this inverter does not have a dedicated protection ground for the 110V output, what's your suggestion on how to effectively install functional GFCI outlets stand-alone (batteries/alternator) and connected to the grid (considering that the grid had proper protection ground).

Why does turning on the chargeverter cause the inverter to shut down? This makes no sense. You buy a battery system so the house won’t go dark during an outage. You don’t want everything to shut down when you connect your generator.

Thanks… Thinking of replacing my 2 fortress 18.5kw with 6 eg4 14.3kw indoor units to my dual 12k solar-ark’s. Do you see any issues?