Видео

For sure! Thank you for asking. You do not need to unplug your cell phone. I typically press the physical "setup" button next to the tunner knob to pull up the car's menu if I need to access the car infotainment to use the Palisade driver talk feature, turn the music on quiet mode, or make other adjustments while running Andriod Auto. After the adjustments are made you can select Andriod Auto from the menu to get back to where you left off. However, you can press any of the physical buttons - MAP, NAV, RADIO, MEDIA, or SETUP to quickly exit Andriod Auto. Hope this helps, enjoy your Palisade! -Steve

@@stevestipstechtackle thank you so much

Ha! That is exactly what happened. 😂 Check out 8:30 on the video! -Steve

Yes, you can easily update the URL in excel! I will post a quick video walkthrough to demonstrate. However, here is how: In Excel go to Data, then Queries and Connections (or existing connections), double click on your query (probably named "table X") - this opens up Power Query Editor, on the right hand side under "applied steps" click on "source" to see where the data is being pulled from, then at the top in the formula bar you will see the URL that you created, add in your additional stocks to the URL where you want them separated by commas, and then click the home tab on the top ribbon and "close and load". This will update the query in excel with you added stocks! Hit refresh and see the stock tickers update your table. Best of luck! -Steve

@@stevestipstechtackle Thanks again - I tried the steps you listed and it worked perfectly!

​@@psilvestSweeeet! So glad it worked for you too! -Steve

Yes! 😂 I cant believe i did that, once corrected the wire - problem solved! Thank you!!! -Steve

Yes, I did. They worked great. -Steve

@@stevestipstechtackle thank you so much

Thank you for the question! Yes, you can change the last bit of the URL to reflect the fundamentals view! Instead of using /v1 at the end of your URL you can use /fv at the end; for example - finance.yahoo.com/quotes/mstf,fitb,ms,md/view/fv Good luck in Excel! -Steve

Excellent, glad it helped! -Steve

Thanks for the note! So, it does appear that when the BRAVIA updates the firmware, it also updates Google TV. However, I am out of the area right now, will confirm what version of Google TV my BRAVIA is running. The latest version of Android TV / Google TV is Android 14 for TV. So, I am curios as to what the BRAVIA is running after this latest update. -Steve

🎉 Excellent! So glad I could help! Thanks for the note.

Fantastic! 🎉 So glad it helped you out.

Will take a look at mine later today…. I ran the update as well, will post any noticeable results!

@@stevestipstechtackle I am located in Germany. Maybe the Update is for G or EU only.

I could not notice any major improvements on my BRAVIA, but I took a look at the UK Sony site www.sony.co.uk/electronics/support/lcd-tvs-android-xh90xx_x90xxh_x91xxh_xh92xx-series/kd-75xh9005/software/00286324 and under previous improvements noticed a few updates that could certainly improve picture quality/processing! So, for me, always good to update to the latest firmware. Good luck! -Steve Improves general performance and stability Improved User Interface Introduces Apple TV app Enables 4k120 Hz signal support for PS5™ Enables eARC support Improves the compatibility of the Variable Refresh Rate (VRR) feature with other devices Improves video streaming smoothness in specific applications

Excellent, so glad it helped! -Steve

Wow, that is a bummer... an option may be using USB recovery. There is an option to order recovery media or download it from the website (they charge a $29 fee for the USB media, but the digital download is FREE). I would try a few more attempts on the NOVO button after rebooting. Otherwise download and try the USB recovery. pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-9-14iap7/82lu/82lu0001us/pf45dsbg/downloads/order-recovery-media Good luck with your system! -Steve

Precisely! Each compartment is filled with the amount of food needed for that feeding.

For sure, I am stumped! If I think of anything else will let you know. Sorry it is not working for you. -Steve

@@stevestipstechtackle no problem, thanks for the effort!

Bummer! What is the web address you are using? Make sure it works in the browser. -Steve

@@stevestipstechtackle Thanks for the fast reply! Yeah, URL works fine, both in normal and incognito, in excel I get the web preview just fine, but it doesn't grab the tables, only the text.

I will have to research that a bit more. This feature is using power query in excel, so there could be a setting that needs to be checked. I don’t have my laptop with me this weekend, will take a look when I get back. Closest thing I found was in a Power Bi forum. It pointed to a web table inference in the options. File > Options and settings > Options > Global > Power Query Editor-> Enable web table inference option , open it, then save the change and reopen the deskop again, and input the URL, then the system will give you the suggested table. BUT, I am not sure if this is a similar setting in excel. Let me know if you crack the code on it and I will take a look when I can. -Steve

@@stevestipstechtackle Thanks! Will check this and report back.

I did, unfortunately I can't find that option.

😂 that may work too!

Awesome! So glad it helped! Appreciate the comment. -Steve

Glad it helped you too! And I appreciate your feedback. Have a great weekend! -Steve

Awesome, I hope it helps you get it done with a DIY solution! Absolutely - soooo much cheaper than the appliance repair companies. -Steve

Awesome! Thanks for the tip! I had not thought to try it. Does it hold fast? I was wondering because of the large gap that the VS mount fills. Thanks again! -Steve

@@stevestipstechtackle So far no issues.

Awesome! Probably saves a few bucks 💵 too! ​@@antoniosalinger3155

Ha! Awesome 😎 so glad you can use it. I thought it was the best thing since sliced bread too.

You are so welcome! Glad to assist. -Steve

Thanks! I have all but given up on the cheap Chinese rod and reels. I am going to spend some money on quality gear and see the difference.

Concur! I normally pass the line into the eyes and extend the rod a bit to make it easier! 👍 -Steve

Bungie cord

For sure... was a bummer, I had such good luck with the earlier model.

Excellent, let me know how it works out!

Cool that is a nice OLED TV! I am not familiar with that piece, but did find a few reference docs that may help. Are you doing a wall mount? If so, this is the official Sony bracket and instructions - it comes with the support bracket which is attached to the back of the BRAVIA 8. (there are two models so double check our exact model number) *Sony Wall-Mount Bracket* www.sony.com/electronics/support/res/manuals/I435/cbfb9bacb91cc7c44b7ef6767bbeaae7/I4351001M.pdf www.sony.com/electronics/support/res/manuals/I436/1ddb859d30e998366c31a4b9028b3342/I4361001M.pdf *Sony BRAVIA 8 Manuals here:* www.sony.com/electronics/support/televisions-projectors-oled-tvs-android-/k-65xr80#manuals Good luck with your new Sony BRAVIA! Hope this helps! -Steve

Absolutely, I was scratching my head too. Seems like an extra piece that could built into the back of the TV. 🤔

I don't like idling the car if I don't have to... So I did it in accessory mode, however Hyundai recommends running the car so the battery does not die. Your choice, but I had no issue with the battery in accessory mode for the 2 hours.

@@stevestipstechtackle Ok thanks! I just did mine with the car running out side my garage. I have a 2021 Limited. I was doing some maintenance on my Tacoma so I didn't even notice the time pass by.

Excellent! Love it when a plan comes together. 👍

Glad it helped! -Steve🤩

@@stevestipstechtackle but I still lost lol

@@anthonyhall8467 Doooogh! 🤣

Rob thanks! Hmmmm. The link should still work - I use the refresh data button daily in Excel with the link. Unfortunately, the My Holdings page with shares held data will not work unless logged in to the Yahoo Finance portal. The only other view that works *without logging* in is the same link, but changing the end from V1 to FV - this view provides the fundamental data for the stocks. EXAMPLE: finance.yahoo.com/quotes/AAPL/view/fv The only way to get your holdings is to get the log-on function to work in Excel - and that has been one problem I have not cracked the code on yet.... If I get it to work I will provide an update! -Steve

@@stevestipstechtackle I guess that makes sense, as they would need to know the user to get their portfolio. I wonder if it would work if I was already logged in to my portfolio? The /fv version works for me.

Sweeeet! Glad it is working! I tried the portfolio view URL in Excel when already logged in, no dice. From what I see each time Excel reaches out to the Web to pull the data it is a "fresh" web pull, so it is not using your open browser history or cookies.

Wow 19 babies! No judgment here, it happens with Platys for sure - we did not notice our fry for some time and most were lost. The main thing to consider for the baby fish is their size. Assuming they will be going back into the tank with adult fish.... the babies need to be big enough so the adults will not eat them! If you get the 20-gallon setup and use it exclusively for the fry, then they will be good to go. Only obvious word of caution is to be sure that the 20 gallon is fully setup, cycled, and conditioned for the fish. “Cycling” the tank means growing the correct, healthy bacteria on a new filtration system to remove dangerous toxins so the fish can survive.

@@stevestipstechtackle agreed! Unfortunately I’m lacking and struggling and made a bad decision at a fish store today!! So I bought, three zebra loaches, 5 more platies, 4 pregnant, and stuck them all in my 5.5 gallon. Not to mention it’s over stocked and 4 of those platies are pregnant and I have two other tanks running, but neither of them have heaters. So I can’t move my fish over. 😖 and I’m broke till next Friday. I’m an idiot. You can judge me now 😣

Yes, not smart. 😬 Too many fish create elevated ammonia levels in the tank and dead fish. Be sure you vacuum more often until you get the new tank up and running to try and remove the excess waste. You may need to add additional water treatment products to the tank as well (use the water test strips to see how your water is holding up). Good luck and please make better choices for your pets!

💯 Awesome! Glad it helped.

Bummer!

I have not seen that before ... I just was looking at the BIOS menu, but don't see any setting for the Novo button. Any chance the button itself is jammed down?

Glad you like it too! 🎉

No problem 👍 Glad to share!

😂 That is true! 💯

Ha! Yes that is true. 😄

HI. This is the link to the same one I purchased in 2020 - but it looks like it is slightly different now. amzn.to/3Xocfee Also, I am not sure that the quality is still there - the new one that I purchased from Plusinno to replace this one broke after only a few uses! At first the reel seized up - see video here: ruclips.net/video/Bp0GRBLaebM/видео.html and then the rod itself broke off at the base. It did not last a month and a 4 light uses! I never did hear anything back from Plussino customer service.

For sure - I had great luck with this rig for saltwater fishing. 10lbs may be a bit light, but a lot of fun if you get small to medium fish on. Good luck and have fun! 🎣

For sure! Glad it worked out!

Excellent - hope it turns out well and does not take up your whole afternoon! Good luck! 👍

me too

Sorry for the confusion! The VESA mounts are the same technique either way. I recently remounted our BRAVIA to the wall, using the same technique. Of course the big difference is mounting the wall bracket.

Yes, I sure did. The triple split screen is gone with the update! This is good or bad depending on your use case / personal preference. No way to get it back that I know of. But the improvements for me outweigh the change in layout.

Nice! I have been wanting to rework mine to take advantage of data cleaning either in power BI or power pivot.