I really recommend putting the 1,2,3 precision block on the solid rear part of the vise. This gives you more security by reducing the risk of crashing the machine. I also recommend never using the work offset of the moving part of the vise, especially if you are running production. 👍
Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
Once you've successfully set up both tools and work off set. Loaded the program into the machine. Where do you go from there to start running? Go back to MEM mode, hit progam and cycle start?
Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.
Where did you get the bright screen ? I have a OSP700M (CadetMate) and the screen is hard to read, especially if there's alot of lights around in the shop. Is it easy to swap and costly ? Best regards
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.
I do not know why you have that big vise.......instead 2 smaller......?????? the force is the same.......but you have more benefits and advantages.
Any possible way you could show threading in IGF? Our manual is missing the page for threading and it's proving to not be very intuitive.
i need a copy of some of the 9000 series programs that you may have on your machine. we accidentally deletes some can you please help me with that
Please how can I reach you
G42 G40 How to offset to machine circle R10 groove
I really recommend putting the 1,2,3 precision block on the solid rear part of the vise. This gives you more security by reducing the risk of crashing the machine. I also recommend never using the work offset of the moving part of the vise, especially if you are running production. 👍
Como alinear el eje x
Hola tengo una torno igual pero me sale una alarma 2003 de sobrecorriente. Se quedó bloqueada
More videos please..
Hi. Do you know how to convert Japanese to English?
You should of called up the tool when you probed
Nope, once u go dmg there is no going back..
I can not retract the tail stock quill, I’ve tried all m codes no response.
Hi
Hello sir.Can you please help me on how setup on SL603
Sir zoom nothing is seen which key are u using to operate
👍
good explanation
This could be done in 30 seconds with a touch setter
What year is this Doosan Lynx 220?
May i ask cost of machine like that, want have some idea. Thanks.
Hallo bro . Please review GSK
That was a nicely done demo.
432 is a roughing insert 431 is a finishing insert
Excellent video! I just purchased a used Fanuc controlled lathe and this video has been very helpful in getting up to speed with setup and operation.
All you have to do is explain that all tools are timed off the main tool. Timed meaning coming from that tool. But great work as well.
Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
What about the workshift settings?
How can I bind the "C" axis?
Как можно привязать ось "С" ?
Thats realy great thanks alot
Helpful video!
"orientate"...
no voice please increase the volume thanks
Once you've successfully set up both tools and work off set. Loaded the program into the machine. Where do you go from there to start running? Go back to MEM mode, hit progam and cycle start?
I hate fanuc😢
Как подключить покажи
buenas tardes cual es el codigo para descativar la alarma de la puerta gracias
en la caja que trae tiene los codigos pegados,donde estoy trabajando aurita es solo haas que tenemos y ganesh
Check coolan and air levels before!
Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.
I añmps forgot all about cnC lathes,, besides ,I'm making more money on construction.
Thank you for sharing your experience. Please tell me if Okuma has a graphical simulation mode? And if so, how to use it.
Спасибо что делишься опытом. Скажи пожалуйста есть ли на Okuma режим графическая симуляция? И если да то как им пользоваться.
Привет как подключить знайте это станок
Hocam merhaba ben Türkiye den yazıyorum 🎉
thanks a lot!
Where did you get the bright screen ? I have a OSP700M (CadetMate) and the screen is hard to read, especially if there's alot of lights around in the shop. Is it easy to swap and costly ? Best regards
Ran one of these and a mill back in 2015 for a oil tool company. The Okuma mill was a lot of fun.
Hai Sir, pls any video available how to take Okuma tool offset & programming examble pls.
Where is your country sir??
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.