- Видео 43
- Просмотров 561 626
ndchevy4fun
Добавлен 2 авг 2008
McIntosh C28 and MC2100
McIntosh C28 and MC2100I bought new in 1975. Second MC2100 got in 2010 and serial numbers are next to each other! How about some Grateful Dead with Jerry on the solo on the JBL 4311b
Просмотров: 353
Видео
Collins 75A-4 Central Electronics 200v
Просмотров 3992 года назад
Collins 75A-4 with Central Electronics 200V
Case 1060 Gleaner C2 Massey Ferguson 92 Super on Richard Slater Farm fall 2021
Просмотров 4843 года назад
Few classic combines near Maddock North Dakota The audio is not good after putting this video together?
Butte Valley farm
Просмотров 405 лет назад
nice fall day ..........too bad my finger got in the way of the lens a few times when driving and recording
2018 03 31 002
Просмотров 896 лет назад
Winter stereo setup The Clapton REEL to REEL not CD Also forgot the Teac X10R reel to reel that I got from Lee years back.
2017 06 09 017
Просмотров 907 лет назад
June 9th, 2017 3 miles south of Harlow North Dakota Show rotation of funnel cloud
Teac A-3300SX Reel to Reel 2 Track
Просмотров 6867 лет назад
Trying out the Teac A-3300SX 2 track reel 15 ips recording is only 45 minutes of recording time. play back is very good.
1956 chevy 327 4 speed shifting 6500 to 7000 RPM
Просмотров 40 тыс.8 лет назад
1956 chevy 327 4 speed shifting 6500 to 7000 RPM
1956 Chevy 2dr 327 4 speed 4.88 gears
Просмотров 336 тыс.12 лет назад
1956 Chevy 2dr 327 4 speed 4.88 gears
1955 chevy first drive in 40 or so years
Просмотров 68612 лет назад
1955 chevy first drive in 40 or so years
Gold Dust Twins Collins 75A-4 and KWS-1 in QSO
Просмотров 1,1 тыс.13 лет назад
Gold Dust Twins Collins 75A-4 and KWS-1 in QSO
Learn how to shift..you never lift on the gas peddle
This looks fun, and warm 🥵
Ah yes the 327 my friend has a 56 with a doug Nash 5 speed
Those sold for the equivalent of 30 grand when they came out. I am amazed they sold enough of them for there to be survivors today.
It's like a beautiful candy shop.
Jesus
Yes please
Man you drive the hell out of it🔥
Nice set up
talk about granny shifting,, lol
I’m rebuilding a set of gold dust twins now.
My brother had a 59 El Camino with a "lopey" 66 Corvette engine and a 4-spd. Rockcrusher? If there was I a time I could go back to just to hear it idle at a stop when I pushed in the clutch.
That's RIGHT wind the PISS outta that thing everyone did it back then!!!! It'll be FINE and if not then it's JUNK anyway lol sounds great
What's the top speed with 4.88's?
4.88 rear, 29 inch rear tires, 6500 RPM = 115mph
Such a great engine
Omg 🤣 that's fantastic 👏 it's like I'm a teenager all over again 😁
New hams, find one of these receivers and use it for a couple hours and find out what a smooth operating, beautifully sounding ham rig is like. The CW note on my 75A4 to a Collins speaker was the cleanest, most elegant music you could hear. You do not have to own a Chinese toy to be a ham-- there was an Art Collins era, now sadly passed on.
Oh yeah!
Very clever w/the lever!....though there was no reason to lift while shifting.
Love the stove bolts (55-57 Chevys). Had a couple of them 'back in the day' (stock 57 ragtop and a built 55 210 post 2 door). I have that exact same Sun tach mounted in the same place on my 71 Chevelle Malibu 400 ragtop. It's had a residence there for over 40 years and is still working well.
I had a 56 2 dr post that had a bored out 283 that screamed. 3 speed on the floor. That was 1970 or 71. 1970.
Yes the 283 ! ran a power pack 283, 4 speed, 3:55 posi in 55 hard top in 1974-75. it was a fun setup and held it's own.
I had a friend that used to race a 67 mustang and he always used to tell me, "if you want to win, you gotta drive it like you hate it".
yep used to do that, broke everything, sure was fun
Glad to know someone knows how to shift a 4 speed
Sweet, brings back wonderful memories, I had a 56 Belair 2 door hard top with a 327 had a Crane SS 330 Solid Lifter Cam, Muncie 4 Speed and 411 Posi traction. My oldest brother built the engine for me. It was bad to the bone too !
How has the t10 been in the car?
I remember those days ❤
488 rear gears will get you there pretty quickly ❤
yes it will , for a short blast anyway
Not even CLOSE to 7500.
Nice pass! I believe I heard "3rd-gear Rubber" on that run as well, precision shifting too! Love it!!
There is 2 runs in this video, first one was first time with this 327, first time with this deep first gear T-10 and the 4:88 gears. I had now idea what to expect, second run went smoother until the foot feet stuck for the 3-4 shift. Old video but still fun to drive.
Excellent driver. A 327 Open Headers + a solid life cam.. Dual point..
just something about that combination
At the end column mounted Sun Tach drops to zero. What?
Good eye, I was holding the camera in my hand shifting so it move as I moved the steering wheel. My shifting hand was free and I shut the key off to coast. Can see the key is off but not locked. The key or key chain will also show double time in one of the videos back when I had a 350 in this car. Lots of things going on in this car videos. The video with 327 and 4:88 rear gears was the first time I drove this new 327 and had installed the 4:88 gears in the rear. It broke loose in first and I didn't really have a plan when to shift was just listing to the way the engine sounded. I get so many comments about not power shifting and lifting BS. Just think about it, first time out and you should power shift? anyway it is a fun car and has seen a lot of changes in the past 40 years. Oh yea a solid cam would make 8 grand shifts. Normal shifting is at 6k for 1-2 and 7k for the 2-3 shift. Then back to 6 for the 3-4 shift. This is a 1980 Z-28 tranny with deep first gear. Not a close ratio. So that's why the tack drops to Zero.
Haha, my dad was right lol, those 327’s were fast, my grandpa had a 1966 Pontiac Beaumont Sports Deluxe Coupe A Body in that dark wine red same body style as the chevelle, gto and lemans but it was only built for Canada basically the pontiac version with chevelle headlights, grandpa put a chain around the front deck one of the house’s my dad grew up in, in Ontario, Canada with that car and ripped it right off the house with a heavy duty chain hahaha 🤣.
Still one of the best videos on RUclips, I love it! 😎👌🏻
Old school cool
Bad ass
Damn I'm going to watch this one again!
That brings back memories of my 62 Impala, 327, 4spd., 4:56 gears...it would throw ya back in the seat!👍😎
That 7500 rpm shriek never gets old...Especially behind somebody that can throw full throttle shfts...
What rpm at 60 mph?
Sounds Great , but what rpm did you shift @ ?
I love this video! It really doesn’t take much to wake up a 327. I just added a 268 comp cam and edelbrock intake to my ‘67 327 with the stock 1:94 valve double hump camel heads. Then I swapped out the 2:73 rear gears to a 12 bolt 3:31 and Muncie M20. In my big ‘67 Impala coupe it sure moved (not as insane as yours though).
A man after my own heart, Collins, Central Electronics, McIntosh. I have the same 75A-4/200V setup and run the audio through my C26 to my MC2505. Sounds great! I need to hook up my R-390A to the Mac via the “diode load”, but haven’t got around to it yet.
My favorite receiver the Collins 75A-4. I picked up the CE200V at Dayton Ham Fest 2008 and spent a whole winter bringing it back to life and up to spec. Fun station along with my GDT’s the 75A-4 and KWS-1 make for lots of HF fun. I run a Collins R-390A with my T-368 but used Heathkit stereo with it on the rear diode to listen Angel Music. Bought my C28 and MC2100 new 1975, it is a wonderful sounding setup!
I don’t have a T-368, but I have three R-390A’s, an R-391, an R-725, and two R-392’s. They just seem to find me after I bought the first one. Amazing receivers! I also have a modified 75A-1 that is almost as good as the 75A-4, but not quite. I need to set it up to switch between the 75A-4 and one of the R-390A’s and use them with the 200V. One of these days I’ll get around to that too. My McIntosh setup I just recently acquired, traded a Marantz 18 and some repair work for them. Great deal if you ask me. Along with the Collins stuff, they’re something I’ll never get rid of.
@@AmishSpecialForces what your call de kf0hr
You still have your nova? If you do you should make an update video!!! 😎
James , my 77 Nova has been retired from drag racing 12 years. Each year it gets closer to being put back to street car.
@@ndchevy4fun I'm glad you still have it!!! 😎
My grandma shifts faster than that
The car no for Daly oshalaly mike paye
That looks really fun
Morse code at 420kw
AM at 325 Watts!
In the 60s, I a had turquoise/white 57 Chevy with a corvette 327, 4 barrel, 4 speed and I raced, on the freeway in San Jose CA. a Dodge Dart 273 4 speed and it walked away from me like I was standing still. I was so embarrassed. The guy even slowed down to ask if I was having troubles or I didn’t want to race. The car was beautiful, I wished I had it today.
My oldest brother has a 65 Barracuda 273 HIPO with auto. It screamed, 327 cars had to look at tail lights.
That was probably a dodge 340, he was lying
Reminds me of the good old days.
damn man these 327's are slow as fuck 7K rpm shifting and still at 0 mph