Видео

Waarom typ jij zo onduidelijk? Kan het niet eens begrijpen.

Where do i need to send it to? :p

Yes that will work fine.

Thank you and no problem. I couldn't find alot of information back then when i started the built. The built is awesome, BUT: take your time, and do not cut corners. Then you will have very nice results.. also give the prop axle some extra attention. When to much power the axle will bend with the original coupling.. i have made a 3D printed bearing block design so the axle can't bend anymore on high torque.. And also installed a cardan coupling so the axle is fixed. Many succes with you built.

Thanks!

The lights are just ordinairy 5 and 3mm led diodes. And then installed in the included light buckets. Pretty straight forward i must say.

@@FCRC thank you!

Everyone has the same amount of time. It is the priorities that make the difference. Prioritize what you like to do the most. Greetings FCRC

Check my other video of how to build a trailer.. there you can see the the suspension in detail.

@@FCRC I sifted through it and couldn't find it. Mind linking it in rhe description? It's a well thought out suspension.

ruclips.net/video/r-rlKPogzZE/видео.htmlsi=w7GtbwGEswAUpf2h

I have custom made it myself and it is not for sale anywhere. You could make one yourself maybe? Greetings FCRC

Do you have one yourself?

hola juan, este trailer está diseñado y hecho a mano por mí. En aquel entonces fabricaba 5 piezas y vendía 3 de ellas. Todavía tengo 1 para el Spartan y 1 para el M41. Pueden manejar terrenos muy accidentados. Mira el vídeo del lanzamiento del barco espartano para ver un ejemplo.

@@FCRC A que precio lo vende el que es parala spartan

Los remolques costaban +/- 400 euros cada uno, pero ya no tengo ninguno disponible.

@@FCRC ok,gracias

Hello sir, no problem! Happy to helped you out!

Thank you :) It is very fun to operate.

Thank you sir!

Buy a new Rc boat and start over your childhood. You won't regret it! ;)

Hello, I have used aluminium oval tube pipe +/- 1cm, and bend this with a pipebender tool. Then put the hose in the pipe, and seal it with hot glue. This is a very nice truck to have! Succes with your build.

@@FCRC 😊 thank you

Thank you sir, also for leaving a comment.

Thanks, that boat sail very good and is very scale. This video was a blast to shoot!

😢😊​@@FCRC😂😅😅😂😂

I will take a look at your channel then.

No problem, would like to see your creation afterwards! For the trailer part i have another video about how to make the axles and stuff. The trailer is no more then a flat sheet of aluminium. The cutting part i 3D printed a mount with small robot mower knives on it. Hope that this information is sufficient for you, if not contact me via facebook! Greetings FCRC

@@FCRC Yes, i saw the video, amazing.... Mine is not as good looking as yours but should do the same.... i hope... haha.... 3d printing parts currently... yes i will let you know the progress. thanks again.

@katchupoy01 thank for you reply. I am looking forward to it. Many succes

@@FCRC as promised. here is my progress, still work on progress. I did not like the quality of the cut of the 3d printed blades... i might go with the real box cutter blades to see if thats better. I am just worried about it flying as shrapnel if they hit some rocks. ruclips.net/video/AutXMK1C4ks/видео.html

Traxxas

Hello, no cutting! But i did use aluminium profiles to fix the trim tabs in position (flat with the hull) and glued the trim tab holders in position. Afterwards when the glue is cured then fix it with some bolts. I have some pictures when you are interested.

@@FCRC I would be happy if you send me some photos of the trim-tab installation. I'm having a problem. When I go at full throttle or near to full throttle, the boat turns left itself. I think using trim-tab will solve the problem but I'm not sure. (40-45 mm 2 blade propeller / 1000Kv Outrunner motor / 150A ESC) Maybe you can make a few suggestions when sending photos. Thank you

I was send message on Facebook for sharing photo. Thank you So much

@@atillasevli8993 more then willing to send you some pictures, send me your email adres please.. BUT! This left turn thing do have all the Najade boat with a powerfull setup.. the hull design is not for high speed and torque.. trim tabs don't solve this problem, they only produce a lot of drag when adjusting to much.. also i did have a problem of the prop axle bending with high RPM. Herefore i did design a bearing block to support the axle. This boat is awesome but it is not a speed boat unfortunately.

Send the message on this facebook page: facebook.com/share/TNWgriAD1PgTfwnA/

It works very well :)

Thank you sir!

Congrats with your own hauler, they are very cool! These mufflers i made myself from aluminium tube, in combination with a rc smoke generator from aliexpress.

Thanks mate!

Hello, this boat is a build kit. You need to buy the motor, ESC, batterys and remote+receiver yourself. Also cut, glue and paint it yourself. The base kit is around 220 euros. The rest you can make as expensive as you want.

Hello, this boat is a build kit. You need to buy the motor, ESC, batterys and remote+receiver yourself. Also cut, glue and paint it yourself. The base kit is around 220 euros. The rest you can make as expensive as you want. Complete model is around 700 euros.

Thanks you, it is indeed a nice looking boat.

Thanks, what do you mean with the ning?

Thanks! First video that we used a drone. Some nice FPV shots. Greetings FCRC

Next time join us!

It is lots of fun with that many people, there are also always some casualties, but that shouldn't spoil the fun!

Yes, Croix du Chafour is beautifull!

Almost, this was at Croix du Chafour. Next time we will go to la Hoëgne, also beautifull.

@@FCRC Ik woon naast Ninglinspo Het is mijn favoriete er staan ​​filmpjes op mijn youtube kanaal 😜

Yes it was indeed! Up to next time.

It is just an air compressor, sandblast gun, air gun, and water. No need for more, and works great!!

Thank you miguelos!!

STL Files are not available for printing at the moment.

How can I get this caravan trailer ??

This caravan is custom made and not for sale at the moment. ​@@johnlaumen1639

Thanks John.

What do you want to buy?

I’ll buy the rc tow truck for 2.5k

👍🏻

What was the most funny part? :p

I tought so indeed.

Thanks, it took around 2,5 months, but it was not a full time job. Few weeks i would say full time.

Thanks!

Look awesome indeed!

Thank you, next test will be sand and mud :D

Nice! Looking forward to watch! 🐼👌🏻