Видео

As you tension (preload) the steering nut and compress the bearing, I find the fork will slide UP in the clamp because the distance between the upper and lower triple plan decreases. Which means the fork height (set to second engraved line) will now be off - any advice on this? Does it make sense to tighten the UPPER clamp while tightening the steering bearings, so the fork simple slides DOWN in the lower clamp and doesn't screw up the height adjustment??

Legend. Thank you.

Great video! Thanks for the great content. I use the same electronic torque wrenches and wanted to tell you about a cool feature. When you were torquing the oil drain bolt you put it at a 90 deg so it would not effect the torque those torque wrenches have a feature where you can measure the length from the middle of the 3/8 drive to the center of the tool (the dog bone you were using in this case) and set the “head length” and then it does all the math so you can use it straight if you need to

Nice watch !!

I was unlucky on my 23 SAS. Fuel tank had to come off. Pretty fun times, KTM…

How hoping to take from this video is this you’re gonna put it in the shop and it’s gonna sit there for months that would be fine if it’s somebody that only rides 200 miles a year on their bike which a lot of people do a lot of people don’t know they have issues because a lot of people only put 200 miles on their bike. I don’t wanna hear how much it’s gonna cost me to bring my warranty bike in for cam issues or to check the camps. I would like to know for a fact, they repaired the cams. That way we don’t have this issue that would be respectable. Thank you.

Excellent video, much appreciated.

For the new factory edition 300 it calls for c-18 r-18 and no preload mentioned, what are your recommendations for preload. 210 lbs rider full kit with camel back. Mostly single track and hare scramble.

Full Factory now! What is your target for installing Titanium engine mount bolts and also the Ti front axle?

Thank you, for all the hard work you put in through the year. I can't say enough good things about Solid Performance . Your dealership & suspension shop are amazing. Dealing with you guys was a real pleasure. My bikes are now properly set up and a blast to ride. Look forward to doing more business with you in the future .

I always fill up the oil in the middle of the red circle not at the top…

Hey, do you have the links for the tools for adjustment?

The best thanks

Do you need software or do you just turn them on?

Do you recommend a KTM oil service kit or just the spec of oil off say amazon?

I have always put the oil screen inside the plug like it was when u took the plug out and just screwed it in. Will start to put the oil screen inside first now

How about Super Duke1290 R 2022?

Cual es el motivo de desmontar esa horquilla ??

The 2025 factory edition xcw300 doesn't have the preload settings in the manual what should it be set at for single track riding in sand and roots?

Thank you very information video

Sick bike!

This vid is the most explanatory oil change technique I have seen. Brilliant!

Only Gay people use a Torque Wrench.

I did what you said couple of times and it served me well and thank you. now this time my compression fork extends like 5mm longer and the axle doesn’t pass through easily I have to push on the fork upwards . Do I need a rebuild what could be the cause ?

Way easier to install compared to the Super Duke!

Sir, thank you for this concise guide. I have owned my '22 SAS for over 2 years and am ready to install the heated grips.

Very informative and easy to follow, thank you for this video

Any concern with electronics under seat?

Nice job. I love mine. How often do you disassemble to clean and lube it?

Great resource. I was planning on checking my steering stem bearings for grease/servicing them and noticed last time I took my forks off one was super hard to get out of the clamps… so I think I need to realign everything. This will help me figure it out for sure. Thanks!

What years are being effective?

That was a solid performance on washing a bike-- inspiring me to take more time washing myself.

Nice high quality stainless steel drain pan/ deep kitchen 1/2 pan. Same kind we make Lassaga in. 🤌

I am having a problem with it moving to the right when I release my hands. Could the uneven shock absorber oil levels cause such a problem?

They couldn't have just had these standard from factory...seriously KTM. This is an Adv/touring bike, kinda needs heated grips.

Thanks. They're such simple components, why on earth $20k+++ bikes can't include them from factory is beyond me...

If you could share any insight Bike : 2024 excf 350 Stock 72 nm rear spring (Straight rate) Stock 4.6nm front springs (I do not know what valving the front or rear has) Rider: 5’10” 160lbs with all gear My question: would it be an improvement to reduce my spring rate and be at the high (lbs)end of the spring rate window or leave them as is and be at the low (lbs) end of the spring rate window?

How are we supposed to watch this? Turn the phone!

Thanks Hank - Just made it myself.Clean and easy - for 30 minutes! Now - im nice and warm even in Russian autmn!

If you use your bike often, buy a button bleeder for that screw makes the fork super reliable and supple

Awesome video! Thanks for some really excellent practical advice for this routine service. I just broke a screw on the oil filter cover 😭😭😭 “Just snug it up… don’t put the fear it in… just be nice…” MANNN I feel like a dummy. On that topic, do you recommend a protocol for removing the broken screw?

I just bought a used Husky FC250 with 50 hrs on it. Went ahead and changed the oil and noticed what looks to be aluminum flakes in the oil screen. Nothing on the magnet drain plug or in the paper filter. any idea where this would be coming from? I cant seem to find any info online just a bunch of dead ends on forums.

What’s the torque spec on the reverse thread insert when reinstalling the shock on the bike?Thanks guys

What's the average price for this service?

Hello, the video was very well explained, I really liked it. I followed your instructions and when I finished I found that my motorcycle, a 2024 1290 r, does not have the option in the menu to enable heated grips? Under the language it does not appear, do you know how I can solve it? thank you

I'm not one of the Lucky guys, I am unable to find the connector😢.

Thanks Hank! Very informative. I'll be doing that exact job soon...

great vid!

Thanks for the video!

Nice job 👍🏽