Rapid Rebuilds CO
Rapid Rebuilds CO
  • Видео 7
  • Просмотров 92 105
2021 Benelli upgrades and custom intake build
I upgraded the levers and intake on my 2021 Benelli TNT 135 for less than you would expect. I got some sleek new levers from eBay for about $25 and was able to create a custom intake for about the same amount. If you are into budget builds this is for you.
Просмотров: 251

Видео

First time at Valentine Valley MX in KY
Просмотров 87111 месяцев назад
Started out a little slow rolling the jumps since it was the first time on the bike in a long while but started feeling comfortable after a couple laps.
Adding class to your Shock reservoir with an aluminum can wrap
Просмотров 1,5 тыс.2 года назад
Adding a little flare to your shock reservoir in less than an hour. You can do this with any aluminum can of your choice.
Headlight restoration
Просмотров 242 года назад
Tried out the Meguiars headlight restoration kit and was not disappointed.
2009-2018 Ram 2500 6.7 Cummins EGR system cleaning
Просмотров 19 тыс.3 года назад
I will be cleaning the EGR system on my 2011 Ram 2500 6.7 Cummins with Super Clean degreaser
2003-2013 Ram 2500 front and rear shock replacement
Просмотров 35 тыс.3 года назад
I replaced the shocks off my 2011 Dodge Ram 2500 4x4 shocks with some new Rough Country N3 replacements. My truck has a 2in leveling kit and determined these would be the best replacements for the price.
2009-2018 Dodge Ram Cummins fuel injectors replacement
Просмотров 36 тыс.3 года назад
2009-2018 Dodge Ram Cummins fuel injectors replacement

Комментарии

  • @alexanderkampen
    @alexanderkampen 27 дней назад

    Fuckin dodge owners hahahhaha 😂😅

  • @rossdemers4437
    @rossdemers4437 2 месяца назад

    Doesn't show enough

  • @agustinrosales91
    @agustinrosales91 2 месяца назад

    How many inches is your lift?

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 2 месяца назад

      @@agustinrosales91 it’s just a 2-3in leveling kit that was on the truck when I bought it

  • @liltimmygaming6092
    @liltimmygaming6092 3 месяца назад

    Clutch kit

  • @andrewshultz6160
    @andrewshultz6160 3 месяца назад

    Now we’re talkin. 🔥

  • @isaacyz450f
    @isaacyz450f 3 месяца назад

    I’ve seen people saying it will overheat the shock is that true?

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 3 месяца назад

      Nope I have not had any issues with it for the two years I’ve had it on there

  • @nathanurick8320
    @nathanurick8320 4 месяца назад

    You are obviously mechanically inclined but making videos is not for you. Terrible

  • @demarcusstreater9475
    @demarcusstreater9475 5 месяцев назад

    Horrible video. No real information

  • @nathanurick8320
    @nathanurick8320 9 месяцев назад

    If you take the fuel rails off first and get it all out of your way it might make it easier.

  • @Ben.Pinard
    @Ben.Pinard 10 месяцев назад

    This works on any bike right

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 10 месяцев назад

      Yeah as long as it has the reservoir because you can adjust the size of the can to fit bigger or smaller ones

  • @calebc6028
    @calebc6028 11 месяцев назад

    thanks, just bought a 2012 with 126k runs great but always good to know how to do something what youd need

  • @erniehardeman7228
    @erniehardeman7228 Год назад

    Nice work my guy but if your abke I would delete that truck I have a o8 and deleted it some time ago has 250k and still runs like a new one.Oh yeah 24 mpg on the interstate also

  • @joerambo4977
    @joerambo4977 Год назад

    Where you jacked up ? Or sitting on tires?

  • @sanchez3767
    @sanchez3767 Год назад

    What is the name of the part in mi ute 7 56? I need to replace that part

  • @LarryHardt-w2d
    @LarryHardt-w2d Год назад

    Sorry, can you reuse the old gaskets or would it better to buy new ones?

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 Год назад

      I wouldn’t recommend because then you will get a bad seal and have an exhaust leak.

  • @LarryHardt-w2d
    @LarryHardt-w2d Год назад

    How long did it take you to remove the egr valve and clean it and then put it back on?

    • @excavationtime2551
      @excavationtime2551 Год назад

      For the Egr I would give it 24 hrs clean and letting it dry good. To remove 30min.

  • @LarryHardt-w2d
    @LarryHardt-w2d Год назад

    I realize the cleaner you used is probably a little less expensive, but would it be better to use Berryman's carb cleaner in the gallon jug? It can be filtered and reused several times and you don't have to use water. You could make a make-shift container out of an old gallon jug of coolant and let it sit overnight and then just spray it off with the Berry-man's spray cleaner to rinse it off. Just chiming in. I don't own a diesel truck yet but soon.

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 Год назад

      I’m not sure I haven’t used that before. I used a degreaser and those seem to work good.

  • @frt33twn
    @frt33twn Год назад

    How much did you spend on repairs

  • @IBSC2000
    @IBSC2000 Год назад

    Thank you, Alex

  • @rafaelmedina5798
    @rafaelmedina5798 Год назад

    Good

  • @terrywaters6186
    @terrywaters6186 Год назад

    The hardest part is getting the driver side shock back down into place with the shock tower (triangle piece) attached, the part you failed to show.

  • @robertsimpson7113
    @robertsimpson7113 Год назад

    Too bad you didn't clean off that valve cover before you installed it. Some of that dirt fell into the motor.............

  • @gdt5430
    @gdt5430 Год назад

    You didn't record some of the most important steps to removing the EGR Cooler. You jumped around too much.

    • @goducgo
      @goducgo 6 месяцев назад

      The valve and filter are easy the cooler not so much. 😕

  • @isaacdanielvallejohernande1520

    The injectors don’t need be programed??

    • @fishtanksgokarts858
      @fishtanksgokarts858 Год назад

      They do, those injectors will not be functioning properly, you are supposed to code them with the code that was on the tag.

  • @scrawny2329
    @scrawny2329 Год назад

    What is the valve lash supposed to be

  • @thomasarrowood7554
    @thomasarrowood7554 Год назад

    What about setting the valve-lash??? Surely u ch3cked it!?!?!

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 Год назад

      Yeah should be .010 for the intake and .026 for the exhaust

    • @titogarcia2223
      @titogarcia2223 Месяц назад

      No need to set valve lash if you just take off the 8mm bolt holding down the rocker arms and installed new injector then reinstall rockers arms and torque down 8mm bolt to 27lbs that's only if you take off the 14mm bolt for the valve lash

  • @nanscollections4212
    @nanscollections4212 Год назад

    Thanks for the "Quick" listen and saving me some money.

  • @omorin34
    @omorin34 Год назад

    Thanks for the vid. I'm doing this next weekend.

  • @kyles234
    @kyles234 Год назад

    The 07.5 and 08 6.7 cummins is the same. Should say 07.5 - 18 6.7 Cummins

  • @871copperhead
    @871copperhead 2 года назад

    A crows foot may work better

  • @frontlinemedia4270
    @frontlinemedia4270 2 года назад

    Wow, what a pain in the ass. I thought a sprinter was a pain. Any ideas of how to figure out which injector is bad without a great scanner?

    • @shaneharris6134
      @shaneharris6134 8 месяцев назад

      You could disconnect the supply line so the fuel is spraying out a little bit, do it for all of them. If the injectors are working the it will be obvious because the motor idle will get rough. Whichever one you loosen and don’t get any change in idle if the bad jnjector

  • @walkingdeadalphaCO
    @walkingdeadalphaCO 2 года назад

    You might as well replace all of them if you do two from what I have heard. The new ones would out perform the older ones

  • @curtbrant7327
    @curtbrant7327 2 года назад

    Hey Alex, great video and good sound. Just wanted to mention one thing that might make your install a little easier in the future. Now this might not work quite as well with your leveling kit, as it does with just a stock suspension, and this is only for the front shocks, but jacking up under the suspension, and then blocking the frame with a jack stand, and then lowering the wheel down would relieve the tension off of the shock so that loosening the nut at the top of the shock tower, (as well as the bottom bolt), would be a little easier. You might have to use a little stool to reach in there. Also loosening the shock nut first before undoing the shock tower nuts and just setting the tower aside, will make it a lot easier to pull the shock out, as well as installing the new one. I've done a lot of these and any time you can relieve the pressure off of the springs is a good thing. I noticed that there was still quite a bit of pressure in that shock, so this might help you. I even raise the rear end and block under the frame in the back as well. It just makes things remove and install a little easier. Hope this helps and look forward to future vids. Thanks!

    • @nathanc5789
      @nathanc5789 2 месяца назад

      Thanks for these tips

  • @GaryWRose
    @GaryWRose 2 года назад

    Loose the loud music

    • @billbailey1620
      @billbailey1620 Год назад

      as long as its not rap. I turn off every rap music vid.i mean why just why. tgat wax just a radio station.

    • @ElChocolate420
      @ElChocolate420 Год назад

      My guess is he had some unwanted audio on that part of the footage.

  • @randyprince9913
    @randyprince9913 2 года назад

    Loud music made me stop Watching before the end. Why?

  • @brianoswald6970
    @brianoswald6970 2 года назад

    What solution did you use to clean the parts

  • @blueharley2
    @blueharley2 2 года назад

    useless video because you didn't show how to do it

  • @gb4807
    @gb4807 2 года назад

    on 2016 ram do you have to reprogram the injectors ?

    • @rapidrebuildsco2772
      @rapidrebuildsco2772 2 года назад

      No there shouldn’t be any reprogramming needed but you need to make sure the wires that are screwed into the injectors are connected the same way it was removed

    • @fishtanksgokarts858
      @fishtanksgokarts858 Год назад

      Yes he should have coded them with the appropriate code on the tags they came with but it's not as serious as people make it out to be, it's just the optimized code for that injector so they are just running on the previous codes

  • @pipedreamin
    @pipedreamin 2 года назад

    That is for the assist. Doing the shocks on my dads 2006 and wanted to make sure taking off that little tripod on the front was right. 👍

  • @panthermartin7784
    @panthermartin7784 2 года назад

    Lost me at flat brim.