- Видео 14
- Просмотров 131 014
Mikael m
Добавлен 5 июн 2016
Wingsurf downwind swell riding
Some nice swells at Yyteri, Finland.
Gear:
Wing: Gong neutra 4m2
Foil: Gong ypra SM 785cm2, stab freestyle 41, mast Hm 85cm
Gear:
Wing: Gong neutra 4m2
Foil: Gong ypra SM 785cm2, stab freestyle 41, mast Hm 85cm
Просмотров: 234
Видео
Wingfoil Flaka progression and crashes
Просмотров 3252 года назад
Wingfoil Flaka progression and crashes
Wakefoiling with Gong Hipe
Просмотров 1,1 тыс.3 года назад
Gear: Gong hipe 5'5 (smaller would be better) Foil Curve Xl 1900cm2
Duo480C catamaran sidewind sailing
Просмотров 2,3 тыс.8 лет назад
Sidewind sailing with temporarily testsails. Speed about 5-6 knots.
Duo480C downwind sailing
Просмотров 3,2 тыс.8 лет назад
Downwind sailing with temporarily testsails. Speed about 4-5knots.
Duo480C: 16" trailerable catamaran build and launch
Просмотров 121 тыс.8 лет назад
This is a video of the Duo480C catamaran built during 10 months in Finland. This is a very light boat, about 200kg so it's easy trailer. Boat is desingned by Bernd Kohler www.ikarus342000.com/CATpage.htm
can you share more update of this boat?
Cool video 👍🏄🏼♂️
Hahah Summer, seems like a nice clear ice bath for me. Beautiful waters.
Good old times. I don't miss that monsterous 9m2 wing thought 😅
nice is that an insta 360 on a unicorn stick?
Gopro max 360. Stick is from china, a long one. Tried shorter ones but video with them is not good.
Really lovely, modern, sleek catamaran, subscribed.
Super! What is the size of your kite?
Flysurfer speed 5 15m2 dlx :)
Kiitos paljon!
Good work did you use Marine plywood
Is this about the wind?
Hey Mikael, very cool video. How did you get into the wave with the board? Did the boat pull you in with a line? I've recently got a similar setup with a Gong Hipe 5'3 and an Allvator L. So far I've only managed to fly on the line but haven't dared to stand in front of the wave and let go of the line. It would be cool if you could report how you do it. Best regards Steven
Hello Steven! Here are some thoughts that could help :) Firstly i think that it should work with you foil, if the boat/wave size is adequate. In this video was maybe my first or second time behind the boat. After that i have done it 5-6 times and tried at least following Gong foils: Curve xlt, Fluid XXLT, Fluid XLT, Fluid XLS, Fluid LS. It has worked with every of them, but every foil has it's own preferred speed which it likes to fly. So try different speeds with boat. Boat has been about 5-6 meters long without cabin. I think it is easiest to use the second wave of the boat, at least with the boat we have used. So try to use a rope that is just right length to get you on right spot. First you should use a rope to get to the wave. Position the foil high on top of the wave/slightly front of if. Sweet spot is really narrow and foil has to be high enough to capture energy of the wave. But not so high that it will breach. When you are in the right spot you will feel acceleration and increase of lift. You have to anticipate that and push with the front foot to keep foil under water. Try to get the feeling, when you are riding power of the wave. You know it when the rope you are holding becomes slack. First you should keep the slack rope in your hands and as soon as you drop out of the wave you still have the rope to pull you and keep going. This way you don't have to do time consuming restarts. Only after you can ride the wave for longer period >10 second with the rope slack, you just toss the rope away. The person on the boat can then reel rope in and voila, you are riding behind the boat with just wave :)
Hello, an under table dent and all other hungry electricity consumers can be dimmed steplessly with the 5000W dimmer (7, EUR). I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs for 12 hours at a time, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos on my channel ruclips.net/video/eC2olbCBhh0/видео.html The inverter stays cool, quiet and the MOSFETs remain intact because extreme current peaks no longer arrive at the inverter...
Bom dia linda embarcação poderia postar as medidas se fosse possível. Muito obrigado!
That’s awesome!
Hola buen trabajo el catamaran , te pregunto adentro en la cabina se puede dormir hay bastante lugar como para poner una cama de una plaza o es solo para guardar algunos elementos?
Where i can find plans plz?
Fast enough!
Спасибо за материал!!! Я хочу обводы сделать носовые и кормовые плавно заостренные с внутренней стороны, наружные борта поплавков ровные и профиль прямоугольным треугольником 1200х600 мм.
I think it is a 16 foot catamaran not a 16 inch one as in the heading.
Nice compact design
Courageous !
Wow looks like a good boat 👍
I would like to ask couple of questions about the front of your boat....the front looks like it would try to spread apart if there was speed behind it.....why this shape????.....also the bottoms....why so thin.....why not wider for more floatation???..I'm thinking of building a motorized one(40--50 hp).... I have made the 16 foot cabin boat....with pull out extension....you mite like that pull out....gives me 13.5 feet cabin space at night....So I can sleep...eat....fish all aboard.
It's a sailboat. When it goes fast pressure in the sails makes it's lifting the weather hull, and depressing the lee hull; as it needs righting moment. So, the profile of the lee hull is more powerfull than the profile of the weather hull. This way the designer hopes to counter leeway by changing the hull form.
Awesome 👍
I see you sewed your own sails. Nicely done Was the sail plan included with the boat plans?
Thanks for sharing. Nice work. Intriguing design. After I finished building my Mana 24 I said that was my last boat build but now you have me thinking about another... :)
It may be an optical illusion but I am used to the unsymmetry of the hull with the flat side on the inside. www.selway-fisher.com/Rodcatd1.gif
Envy is good any of these in the in US building that you know of
Any in U S
????
That looks bigger than 16 inches... 😂
Lol i love nice trolls
Ajw312. 🤣🤣🤣🤣🤣
Should have written 16'
hi Mikael we also want to build a duo480 but tried to get in contact with bernd kohler but noway we didnt get any answer. even on his facebook page we cant get an answer . soo anyway our question is it possible to buy the plans from you for the same amount? greetings erol, derya and sesil my email is papaerol@hotmail.com hope to hear from you soon
Look up ikarus342000.com and join the forum it's the best way to contact Bernd
really cool! great work! www.chryz10.com Chris
You Sir have it made. It seems that you can just push your boat to the water. Nice build, cool design.
What a wonderful job!!
nice work! looks fun
Moro! Hienolta näyttää! Haluan tehdä susta lehtijutun. Voitko heittää maililla timmysnott ÄT suomi24.fi yhteystiedon ni jutellaan asiasta lisää. Venealan lehti on kyseessä. Tänks!
Looking good! Very nice indeed!