Видео

Both on the right and on the left. I just showed on the right how it wobbles. Both are stock without lubrication.

Epomaker cido

@@Neprawda. Color?

​@@Neprawda. Are they snow White?

@@Brodie69966 epomaker.com/products/cidoo-matte-switch-set

Да, для пластины Plate нового ничего пока нет. Это скорее из-за того что такое применяют тока на массовых очень дешевых. Дизайн студио это тот же дурок в3. Просто больше цветов корпуса. По факту это просто стабилизатор с moding WILdCat из коробки. Для любителей дурок стабов или Zeal или C3v3 или гатерон. У гатерон новых в2 тоже можно сделать таким же стем, но не так долговечно. Как стабилизатор для 2у все хорошо. Для пробела он мне не нравится. Так как тут нет уменьшения допусков расстояния стема. И он болтается как все стабы 2020 годов. Ну комуто наоборот нравится когда пробел как джойстик. Мне нет.

@@Neprawda. Принял, спасибо за опыт!)

They are too different. Topaz is very light to press.

The stickers are for sound, so that the impact is not on the bare pcb but on the sticker. And the gasket here is for 1.2. It doesn't matter if there is a sticker or not. I made 3 assemblies with them but unfortunately I can't add anything to you since all 3 assemblies are on 1.6 pcb board.

Мне нравились васаби.(линейные) но первые васаби имели проблему с кейкапами если северный диод. васаби в2 исправили это. Бамбук сделан на основе в2 формы. Они легкие они 4мм. Это уже мне нравится. Но больше всего у этого дизайнера мне нравится форма корпус как сделана. Тут очень маленький вобл стема. Не потомучто стем квадрат а именно допуски. И бамб тут как у браунов. То есть кардио. Так как они имеют эту фишку как низкие допуски=минимальный вобл стема они сильно зависят от смазки. Из коробки они без смазки. Смазывать их надо аккуратно под себя, много смазки делает нажатие более тугое слоу тяжелое. Я купил их сначало 70 а потом как понял что они мне нрав купил еще 70. Так как они мне нрав и сток и смазка ручная. Хочу чтобы у меня были в наличии сразу оба по 70 штук)

@@Neprawda. спасибо за подробную инфу) я тоже заказал ночью, жду очень, вот инфы про воббл отдельное спасибо!

Several differences. Do you know or have you heard, there is such a mod from a "wild cat" blogger on keyboards. He modified the stem of some stabilizers. With a knife or scalpel, he cut the partition inside the stem and bent it so that it was like a tongue that pressed the wire upwards. This stabilizer has this principle right in its design. Why did I say about this method of modding? Because it was done on "gateron" stabilizers or "Zeal". And they have a strong wobbling (shaking) of the keycap, since the stem inside moves very freely. And here is the same thing. And the TX stabilizers have a new shape and the wobbling of the stem is less.

KPrepablick на алиэкспресс

@@Neprawda. как по качеству?

@@WZRD.. Толщина 1.8. Очень приятный пбт. Таких много сейчас. Кто именно делает не пишут так как разные тематические или коллаборации.

@@Neprawda. приветствую еще раз. Стоит выбрать pbt либо triple shot abs от domikey. Мне дизайн больше в последних нравиться, но не мало важен еще звук. Для "Thock" звука, какие из двух представленных будут лучше.

Ответьте пожалуйста

Встанут. Они все унифицированные. Есть или стабилизаторы на пластину или на плату. У вас на пластину. Как эти.

The sizes are standard. 6.25 is the most common. It is here.

@@Neprawda.You were right. Got it and the expansion set. Very nice looking. Thanks!

На пробеле все равно надо ровнять скобу. На любых. Но вот серия Paigu\Maiz\StupidWUQUE они одинаковые. На них может повезти и пробел можно даже без смазки. Не только скобу ничего делать не надо но и даже смазывать не надо. А 2у там почти 8 из 10 штук можно из коробки без смазки и выравнивания. Под везением имеют ввиду не что сам стабилизатор такой хороший. А потому что работа стабилизатора это совокупность стаб+свитч+кейкап. Все вместе а не отдельно. Вот это имел ввиду. Что повезет и твоя сборку из коробки сразу. Купил распаковал и установил.

@@Neprawda. спасибо за ответ!присмотрюсь к пайгу и wq

205 here as everywhere, on all stabilizers. You lubricate only the case and the stem from the outside, the part that will touch the case. Inside the stem where the wire is, only the wire itself is lubricated. There is a picture on the video of how the wire is lubricated, in what places. In general, lubrication is a personal matter for everyone. Since all people are different. You need to understand how you like it best. And this also depends on the assembly (switch + keycap). I mean that there are switches where the spring is heavy, and it is not so noticeable there, if there is too much grease or it is too thick, the movement will be a little slow. And if the spring is very light, then it is noticeable that a lot of grease or thick grease makes the press slow. You need to try how you like it. And lubricate it that way. Plus, you need to take into account that the first press after lubrication is slower than it will be in a couple of days. Since the grease will simply smear and the stabilizer will be pressed faster and easier with grease.

I use without lubrication) I have two of the three, Alice layout keyboards. There is a stabilizer everywhere size 2u. They are all default without lubrication, without wire modifications. There is a third keyboard Alice layout, there are 2 with lubrication and two without lubrication. There are other keyboards where they are with lubrication. You need minimal lubrication. Lubrication is more needed to configure as you like, so that the pressing is fast or slow smooth. Another thing is the spacebar keycap, There you need to make the wire straight with your own hands. The wire is soft enough, it does not take much time to work with it. I have one of the assemblies assembled where the spacebar keycap is Paigu with lubrication. But I love the QMX stabilizer. So most of all I have them on the spacebar keycap.

In the video, the stabilizer is without lubrication. Without modifications. Just pulled out of the box and installed. Sometimes, yes, you can do it without anything. I've written this so many times already. The stabilizer's work is - Stabilizer + switch + keycap. All together. Therefore, there are stabilizers where you can get the effect as in the video straight out of the box without anything. But there are only two such models.

No. I have another video. Where I took many different keycaps. Manufacturer and profile and material and thickness. And I checked. This is only one manufacturer's problem. With others it's fine.

@@Neprawda. So the problem is specific to these keycaps? Weird

@@GSixFiveFourThreeFourDashTwo ruclips.net/video/DVj500gvAzQ/видео.htmlsi=6hgUOhKWAIdSFdCV "yep"

@@Neprawda. I'm guessing domikey has a different keycap stem that doesn't fit the unique box stem of the roller switches well. I don't have any dmk keycaps so I can't confirm myself

A difficult question.) Stabies has two versions. Nylon may be slower. And the PC version may be very fast for pressing. If it is important for someone to press without the feeling of slowness, without slowness. Then Stabies is of course better. Type&plus only has one version. And it can be like nylon stabies slow. Since the dimensions of the case tolerances are low, there is little space for wobbling. On the other hand, the Stabies must be made straight by hand. And it must be lubricated. And the Type&Plus may turn out that nothing needs to be done. I mean that the combination of the switch and keycap can be such that the Type&Plus stabilizer is default out of the box. You can just install it and that's it. The tension of the structure from the combination of the switch and keycap will simply not cause ratling or the "click-click" sound. With the Stabies, it is necessary to manually align everything and lubricate everything.

@@Neprawda. Thanks for the feedback. I'm currently stuck with Durock V2, and the ticking and rattling forced me to look for stabs that best avoid this. I ordered the stabies 2.1 and typeplus - i guess i might have to just see the different for myself. On a side note, holee mod on the Durock V2 seems to have mitigated the ticking and rattling - but I'm not sure if this is a permanent solution.

@@Neprawda. i managed to try both now. Stabies v2.1 is better in my case. Typeplus had no wobble or tick - but the upstroke(?) after the keypress had a slight rattle. With stabies, there is no wobble or tick, even after keypress. Lubed housing and stems for both with krytox / Lubed wire with permatex.

@@sm2829 Did you straighten the wire by hand?

@@Neprawda. I straightened wires for both.

Sorry for taking so long to respond) In my country, the government decided to block RUclips. I spent a long time solving this problem. The Duhuk bump has a smoother and rounder tactility, just a little bit. If you compare it exactly. It could be the lubricant or the material. The Asura seems sharper and heavier, just a little bit. But otherwise, they are almost the same.

@@Neprawda. hey no worries! sucks that your country is blocking YT. anyhow thank you for responding regardless and i see. while the ciy asuras are REALLY good their housing are cheap and break fairly easy so i was looking for something better than with quality but retain the same big bumb

I made a photo comparison and comments on Instagram.

Hi, compared to boba u4t. Which one has sharper tactile? Thank you

@@ahmedkurukuru4175 This is not a correct comparison. The Gazzew Boba U4T has a 3.7 stroke length It feels different. And the Gazzew Boba U4T has a 62 and 68 spring. It is heavier. That is why it is very sharp.

No. I haven't seen the first version. So I didn't buy it. I can't compare.

@@Neprawda. OK, thanks! How does this one compare with your other top 3 tactical switches?

@@jedisurfer9591 And why are mine three? If you go to my Instagram you can see that I have a 300+ collection.

@@Neprawda. Yes, I know. What I meant was how does the Bitter Tea switch compare with the other top tactical switches that you have. It is always interesting to hear what people who are trying out many different switches prefer.

@@jedisurfer9591 These switches are from the 3.2 series. There is the CIY Asura and there is the Voyager. There is also the Litchi Milk. They are almost the same. But there is a difference in the little things. The switch is just a part. A fully assembled keyboard is like a culinary dish) The analogy of food is the most concise description of the keyboard theme). So since the switch is just one of the ingredients of the dish. Then the assembled keyboard always has its own specific taste) Than if you judge each element separately. About this switch I can write that while it is new and the molds are fresh at the production. That is good quality. Good lubrication. There are no extraneous sounds or problems with pressing. There are also no noises that are inherent in all tactile dry switches. The pressing is relatively smooth, medium-heavy, with a quick dip to the bottom. The bottom is made of PBT. And you really feel it. The sound is louder and lower.On them you can both type text and play. It is probably even more convenient to play since the stroke is still 3.2 and they have a smoother bump. not sharp. But the pressing weight is medium heavy, this can cause rapid hand fatigue.I personally like light bump. This is the best is akko pom brown. And the stroke length of pressing I like 4mm more.

По опыту

Stabilizers "stock" without mods. Just lubricated. And another previous video "Neo Ergo(White) / 加贝轴 Hmx代工 (Stock)", where I wrote in the description "stock", there they are without lubrication. Dry default without any kind of processing out of the box. Just bought and installed)

I'll start with the fact that these stabilizers are a story like with Pangu \ Stupid \ Maiz. I don't know who made this design first. BUT it's the same for everyone. There's "Designer Studio", there's "Lisafox", and there's DUROCK. They're all the same. Only the packaging, price and equipment may be different. At first, I bought from "Designer Studio" because they released them for GB. And then from DUROCK themselves. They made this design. Which is essentially an improved mod from the box from "wildcat" or like "zeal" or "gateron". Just an improved version. But no other changes. so if you liked "zeal" or the "wildcat" mod for "gateron", then these will be better. BUT if you compare them with other new players on the stabilizer market, then they have no advantages. They can't be used out of the box. Like "Pangu" or "typePlus". They all have the same big wobbling wobble stem, keycap space wobble-wobble. They need to be lubricated necessarily. But the wire can be not aligned if it is not very crooked.

​@@Neprawda. I ordered two v3 sets I will test them. I don't mind lubing, I actually prefer to lube wires with bdz, because I have experience that 205g0 after few days settles and then I start noticing slight wire noises (syringe 205g0 fixes it again but its annoying to reapply lube with syringe, I prefer to do perfect tuning at assembly). Problem for me is most modern stabs I used like Knight/TX can only take 205g0 otherwise even thin layer of BDZ will make them feel slugish and I don't like that. That's why I think this "Durock" design might be good improvement as you say these feel looser and have more tolerances so I think thicker lube will be good. Btw what is wrong with durock wires? I have very good experience with those, especially the golden ones I had. Felt almost straight to me and was not hard to balance it at all, but maybe I was just lucky.

@@kubkodev This design as used in the new v3 durock allows using the wire without manual alignment. Unless it has strong curvatures, very strong ones.

Все платы 1.2. И оригинал и кастомная и у спринга, и у клонов спринга.

@@Neprawda. спасибо

The stabilizer can only be lubricated before installation. Only for now it is disassembled. It is physically impossible to insert a syringe from the top of the body. only if it’s from the bottom of the case, but that’s not convenient. and only before installing it on the keyboard

@@Neprawda. So there is no need to lubricate the wire, just the inside of the stabilizer?

@@felipenouzen Lubricate everything here as usual. You can do the wire. You can do the stem and the place where the wire snaps. The places where you need to lubricate here are the same as everywhere else. In the photo in the video, I showed how the wire is lubricated, I had it. You can't insert a syringe here (physically), the design does not allow it. I showed in the video in the photo what places to lubricate, this is just an option of how to do it. All this must be done with the stabilizer disassembled. After you have assembled it and installed it in the keyboard, you will not be able to lubricate it in any way. Only if you pull it out completely and disassemble it. The stabilizer and its design and tolerances, the wobble of the stem in the case, allow you to use it even without lubrication. At least a stabilizer of size 2u. But size 7 or 6.25 is optional. And you need to lubricate here very carefully, and a little. Just a little bit. If there is too much grease on the wire, it will flow out from there.

@@Neprawda. Understood. Thank you very much for answering.

Knight stabilizers were sold only in South Korea. I couldn't buy them for a very long time. I bought them last month and they will arrive to me within a week. Then I can compare.

Звук лучше только если сделать моды. Обязательно брекс форса мод. Обязательно спереди на углу где пробелы на дно надо наклеить помпон, так как эта точка передает в стол все вибрации и портит звук. Что пом что пк одинаково. Что оригинал, что кастом plate. Чем лучше кастом плата? Настоящая поддержка VIA. Настоящая поддержка раскладок) Толщина или звук у pcb одинаковый. Они вообще одинаковые. У кастом платы кастом шумка идет фоам от версии 1.9. Она как оригинал спринга. То есть размером больше. У вики спринг рекорда фоам шумка чуть поменьше, такие места где usb датаборд например не прикрыто.

@@Neprawda. спасибо

НО мне они нравятся)🙂. Сижу уже несколько дней на них. Желания менять пока нет. Цок не всегда и не везде при печати. Но есть.

Neo has better flex. More ways to attach. More layout options. Magnetic connection method Why did I choose Cycle8) More overall body weight. Greater inclination angle. PCB board without a magnet (yes, because the connector is standard and I can make custom universal PCB in the future)

@@Neprawda. I love the Neo80, still chewing on the C8 but can't stand the long wait lol

In the Cycle8 discord they discussed whether to eat it or not. I made a video just to show that there is a difference. I have all the typing videos so far. Including without foam on pure aluminum without any kind of mods. And everything was fine. But the next videos will be made with the mod.)

@@Neprawda. Thanks. Where can i join the discord server?

@@DonguriGaming discord.gg/clickclack

@@DonguriGaming discord.gg/clickclack

Этой версии уже два года как. У меня есть видео. Ха соврал получается, у меня есть видео с в2. Хотя 2.1 у меня уже два года как есть. НО видео не делал. У стабиесов в разных версиях почти нулевые отличия.

Вот если они выпустят новые. 2.2 версию или лучше 2.3 где будут реал какие то изменения. Тогда куплю и обзор) А про 2.1 я говорил в большом видео " Стабилизаторы 2024"

@@Neprawda. спасибо

@@Neprawda. Ты говорил в этом видео, что собираешь клавиатуры. Где можно ознакомиться с прайс листом и примерами работ?

@@gylinessa В видео "стабилизаторы 2024" я говорил что собираю клавиатуры ДЛЯ тестов, что я покупаю клавиатуры себе, чтобы тестировать свои свитчи или стабы или кейкапы)). Я не продаю. Не покупаю. Не собираю за деньги. Это хобби мое. Покупаю я все сам себе(за свои денежки) и Собираю себе)

с ним и покупал

@@Neprawda. продашь?

@@gylinessa Зачем. Но главное, на али что не продают? продают)

@@Neprawda. чтобы сэкономить

⁠@@gylinessaты и так сэкономишь, там скидки

I don't have "swk" at the moment. This was previously only sold in South Korea. And now they have started in the USA. Only I can’t buy it either here or there. I will buy it in the future. But now I don’t. It's a difficult question. The whole difference will be for size 2u. "swk" is better for keycapping a space than "TX" or "The Typeplus x YiKB". But for size 2, “The Typeplus x YiKB” is better, since it can be done without lubricant. With some combination of switch and keycap, no lubrication is needed, even the “wire” does not need to be aligned. Here the question can be posed as to which is better. Pangu stabilizers, Wuque stupid stabilizers or these "The Typeplus x YiKB" Then the answer can be the same for "2u", and whatever you can buy cheaper, then take it. All three types can be pulled out of the box without any lubrication, installed and used. And if for a keycap space, then “The Typeplus x YiKB” is better from all three of these models.

Yes. The design of the switch case is good. There you can choose an option. A lot of them. I bought another different version. Different color and name and weight of the spring. BUT the pressure and quality are still the same. You can even just install them right away. No need to re-lubricate. BUT it is possible if, for example, you do it for soldering. Better to re-lubricate. I take more photos) on my Instagram. What I procured or bought. Or design features or defects. The video is too expensive in terms of time. Unfortunately. Sometimes there is no time) Work a lot of time.

@@Neprawda. I'm looking for a substitute for the reapers on AULA F75, do you have any recomendations from aliexpress that arent too expensive?

@@pedrokz Aliexpress has such a thing, the price tags are different for different countries) and promotions, too, such as discounts or promotional codes, are different for different countries. What one country will buy for 20 dollars. Another one will buy for 40. Well, there are also different taxes and customs duties. And delivery. In some places it is cheap, in others it is expensive. Therefore, I will buy a switch for 20 + delivery 5. And you buy the same one but for 30 and +10. It's difficult to advise. There are also often promotions or sales on Aliexpress. Stores do this on purpose or Aliexpress itself does this. They raise the price tag before and after the sale. And when the sale starts, they lower it.) I'm keeping an eye on all this myself. And I buy there only when all the conditions are met)) Terms of purchase at a low price. Gateron has a new model. She's cheap. if you keep an eye on sales. This is GATERON Smoothie. You can also HMX switch. There are few of them on Aliexpress. BUT there are 5 models. On sale with promotions or promotional codes, they may also have a low price. HMX emo HMX cloud HMX Xllab HMX Hyacinth

@@Neprawda. Kailh Cream Pro is in promo? Have you already tested? Its hella cheap right now.

@@pedrokz Kailh Box Cream Pro Switch

Проверить конечно же

No. The effect here is that when there is a new, fresh, PCB board, the switch holds up very well. I did a build on stream without foam at all. The sound is simply too loud. Lots of overtones. So for the typing video here I have already done it with foam.