Allegheny York
Allegheny York
  • Видео 113
  • Просмотров 289 785
What is a UCL Hydraulic Seal and How is it Used?
www.alleghenyyork.com/products/27/UCL-LEATHER-U-CUP-w-NITRILE-FILLER-INCH/
UCL - LEATHER U-CUP w/NITRILE FILLER - INCH
Despite the fact that leather u-cups with rubber fillers are somewhat outdated, we fulfill our commitment to our customers by carrying the hard to find items. Many applications still require the use of these seals since there are no reliable retrofits available. Among these applications are bucket trucks, drill rigs, forklifts and some cylinders built by Benton Harbor Engineering®. They are constructed of Thiokol treated leather with nitrile expander rings. Other sizes may be available by request.
Temperature:-50°F to 275°F
Pressure: 0 to 5000 psi
Alternative Seals: UCF
Просмотров: 32

Видео

What is a UCH Hydraulic Seal and How is it Used?
Просмотров 335 месяцев назад
www.alleghenyyork.com/products/26/UCH-NITRILE-NON-STANDARD-HOMOGENEOUS-U-CUP-INCH/ UCH-NITRILE-NON-STANDARD-HOMOGENEOUS-U-CUP-INCH Homogeneous Nitrile U-Cups are made from 80 durometer nitrile and may come in one of several profiles. All may be used for rod or piston seals in pneumatic or low pressure hydraulic applications. Temperature: -25°F to 225°F Pressure: 0 to 2200 psi Alternative Seals:...
What is a UCF Hydraulic Seal and How is it Used?
Просмотров 265 месяцев назад
www.alleghenyyork.com/products/28/UCF-FABRIC-REINFORCED-NITRILE-U-CUP-INCH/ UCF - FABRIC REINFORCED NITRILE U-CUP - INCH Cotton-Duck reinforced nitrile u-cups wear extremely well in heavy duty hydraulic cylinder applications. The wicking action of the cotton-duck material keeps the seal lubricated. The lip seal design also contributes to low friction. Temperature: -20°F to 200°F Pressure: 0 to ...
What is a MURH Rod Seal and How is it Used?
Просмотров 196 месяцев назад
www.alleghenyyork.com/products/24/MURH-NITRILE-ASYMMETRICAL-ROD-U-CUP-METRIC/ MURH-NITRILE-ASYMMETRICAL-ROD-U-CUP-METRIC These high quality rod u-seals are molded from 90 durometer NBR and insure that your systems will seal under zero pressure situations. These seals can be used in either low pressure hydraulic or pneumatic applications. For sizes not listed, or availability in Viton, please ca...
What is an MUPH Piston Seal and What is it Used For?
Просмотров 317 месяцев назад
www.alleghenyyork.com/products/25/MUPH-NITRILE-ASYMMETRICAL-PISTON-U-CUP-METRIC/ These easy to install piston U-seals are perfect for low pressure hydraulic and pneumatic applications. These seals have lower breakaway friction than most urethane U-cups. Also available in FKM. Temperature: -22°F to 212°F Pressure: 0 to 1160 PSI
Manufacturing Large Piston Cup - Compression Molding
Просмотров 1029 месяцев назад
www.alleghenyyork.com/products/149/PISTON-CUPS/ A hydraulic piston cup is a type of seal that is used to prevent leaks in hydraulic cylinders. The cup is made of a rubberized fabric that is bonded to a metal disc. The cup is then placed between the piston and the cylinder wall. When the piston moves, the cup flexes and forms a seal around the cylinder wall. This prevents any leaks from occurrin...
What is a C1 Rod U Cup and How is it Used?
Просмотров 149Год назад
www.alleghenyyork.com/products/22/C1-NITRILE-ASYMMETRICAL-ROD-U-CUP-METRIC/ Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. In...
What is a C2 Piston U Cup and How is it Used?
Просмотров 68Год назад
www.alleghenyyork.com/products/23/C2-NITRILE-ASYMMETRICAL-PISTON-U-CUP-METRIC/ C2 style piston seals have excellent sealing performance despite the small profile. Extremely low friction is experienced because of the short contact area at the sealing surface. These piston seals are manufactured undersized on the internal diameters in relation to the nominal dimensions. This ensures the required ...
What is a 6226 U Cup and How is it Used?
Просмотров 45Год назад
www.alleghenyyork.com/products/21/6226-NITRILE-SYMMETRICAL-AN-U-CUP-INCH/ 6226 series U-cups are manufactured to the AN design. Standard material is 80 durometer nitrile. (May substitute 70 durometer when 80 is not available.)They may be used at pressures up to 1000 PSI with the proper clearances without back-up rings. Temperature: -40°F to 250°F Pressure: 0 to 1000 PSI Alternative Seals: 8400,...
What is an 8400 Nitrile U Cup and How is it Used?
Просмотров 59Год назад
www.alleghenyyork.com/products/20/8400-NITRILE-SYMMETRICAL-U-CUP-INCH/ 8400 series U-cups for pneumatic and hydraulic cylinders are especially suited for low speed, low pressure situations. They provide an extremely smooth steady movement, with less breakaway force required because of their inherent low friction. Standard material for 8400 series U-cups is 80 durometer nitrile, with a temperatu...
Allegheny York CNC Manufacturing 4 1/2 Inch Bearing
Просмотров 131Год назад
www.alleghenyyork.com/wps/portal/c/custom manufacturing This project started with a CAD drawing given to us by a customer, and our team of experts worked with them to manufacture this product to their exact specifications. Sometimes we don't know the exact use for a seal we manufacture because the customer may wish to keep that private. We were not given the precise machine this was going to be...
Allegheny York New DMH Machine Delivery and Installation
Просмотров 225Год назад
www.alleghenyyork.com/wps/portal/c/custom manufacturing Allegheny York recently took delivery on a 2023 DMH 850 CNC Machine which replaced a 2003 DMH 600 CNC Machine. Max. turning diameter: 850 mm Main drive power: 17 kW Total weight: 6,000 kg Dimensions (L × W × H): 3,480 × 2,080 × 2,060 mm Max. bar diameter: 65 mm Slide traverse X/Y/Z: 355/-/610 mm y-axis: no c-axis: no Max. speed main drive:...
What is an MA20 U-Cup and How is it Used?
Просмотров 66Год назад
These seals are to be used in applications where the piston is stepped on the outer diameter to accommodate the flange in the hard nylon heel of the two piece seal. The nylon cap serves as a bearing and anti-extrusion device. The seal material is a high durometer nitrile rubber. Temperature: -22°F to 212°F Pressure: 0 to 3045 PSI
What is 6225-AN Teflon Vee Packing and How is it Used?
Просмотров 159Год назад
www.alleghenyyork.com/products/222/6225-AN-TEFLON-CHEVRON-VEE-INCH/ This short profile PTFE Vee is used in sets for pneumatic and hydraulic applications. Normally they are stacked together, or in conjunction with Nitrile vees of the same profile. Temperature: -100° to 400°F . Hydraulic vee packing is a type of packing that uses multiple-lip, chevron seals to prevent the leakage of fluids. It is...
What is a 6225-AN Chevron Seal and How is it Used?
Просмотров 829Год назад
www.alleghenyyork.com/products/221/6225-AN-HOMOGENOUS-NITRILE-CHEVRON-VEE-INCH/ This short profile 90 durometer nitrile vee is used in sets for pneumatic and hydraulic applications. Normally they are stacked together, or in conjunction with leather or TFE vees of the same profile for hydraulic applications. This profile is also available in other compounds including Viton, EPR, and Leather. Tem...
What is Vee Packing and How is it Used?
Просмотров 2,1 тыс.Год назад
What is Vee Packing and How is it Used?
What is a Piston Cup and How is it Used?
Просмотров 928Год назад
What is a Piston Cup and How is it Used?
JSW 310 Metric Ton Injection Press Delivery and Installation
Просмотров 71Год назад
JSW 310 Metric Ton Injection Press Delivery and Installation
What is a BS-B Rod U Cup?
Просмотров 56Год назад
What is a BS-B Rod U Cup?
What is a UNRR Rod U Cup and How is it Used?
Просмотров 28Год назад
What is a UNRR Rod U Cup and How is it Used?
What is an MA35 Rod U Cup?
Просмотров 45Год назад
What is an MA35 Rod U Cup?
What is an MLLB Rod U Cup?
Просмотров 129Год назад
What is an MLLB Rod U Cup?
What is a BT Rod Ucup?
Просмотров 54Год назад
What is a BT Rod Ucup?
Allegheny York Team Building Event at Autobahn Harrisburg
Просмотров 79Год назад
Allegheny York Team Building Event at Autobahn Harrisburg
What is a BS Rod Ucup?
Просмотров 41Год назад
What is a BS Rod Ucup?
Allegheny York CNC Manufacturing Double Loaded Lip Piston Seal
Просмотров 116Год назад
Allegheny York CNC Manufacturing Double Loaded Lip Piston Seal
What is an MA30B Rod Ucup?
Просмотров 32Год назад
What is an MA30B Rod Ucup?
What is an OUY Piston Ucup?
Просмотров 44Год назад
What is an OUY Piston Ucup?
What is an MA30 Non Symmetrical Rod U Cup?
Просмотров 78Год назад
What is an MA30 Non Symmetrical Rod U Cup?
What is an MA24 Non Symmetrical Rod U Cup?
Просмотров 53Год назад
What is an MA24 Non Symmetrical Rod U Cup?

Комментарии

  • @jefe5555
    @jefe5555 2 месяца назад

    If this is a video on seal identification then it falls short with comments like" it feels like an N70" and others about how the part feels which is no good for discerning what kind to order.

  • @Failedmusician
    @Failedmusician 3 месяца назад

    great video but don't let your camera person film another video. The constant out of focus shots were frustrating.

  • @chocolachan7079
    @chocolachan7079 3 месяца назад

    Bruh it sounds like GTR lol

  • @Premchan45
    @Premchan45 3 месяца назад

    I may had only seen loom charge.Yen Bahu jhar, theat composer hilly.Please a bigger map for general kullai pradeshta

  • @philliprude5997
    @philliprude5997 5 месяцев назад

    What is run off of steam?

  • @gman21266
    @gman21266 5 месяцев назад

    Can this work with steam instead of air?

  • @ArkhamHedler
    @ArkhamHedler 5 месяцев назад

    Some torpedoes uses compressed air engine.

  • @joaovitordejesusrocha7346
    @joaovitordejesusrocha7346 5 месяцев назад

    This is a cool 5 cilinder motor

  • @aggabus
    @aggabus 6 месяцев назад

    Is ac compressor ..? Swash plate

  • @slantedperspective
    @slantedperspective 6 месяцев назад

    And how do you get compressed air ?

  • @arthurmchugh5184
    @arthurmchugh5184 6 месяцев назад

    So if a amish buggy has 2 horses 🐎, does it have dual exhaust 😊😊😊😊😊😂

  • @hilbrandenherder5441
    @hilbrandenherder5441 6 месяцев назад

    Yeah now just add some kind of valve train on top of each cylinder, fuel injection, ignition an bob is your internal combustion engine uncle

  • @renenielsen9173
    @renenielsen9173 6 месяцев назад

    it taks fule or enrgi to make compres air that ther i just stupit

  • @athdot
    @athdot 6 месяцев назад

    Pneumatics

  • @639Andrew
    @639Andrew 6 месяцев назад

    Where does the compressed air come from 0.0 I won't tell the amish

  • @HekateMGO
    @HekateMGO 6 месяцев назад

    Amish people speccing into a whole other tech tree.

  • @orektez
    @orektez 6 месяцев назад

    remarkably environmentally friendly

  • @joseveintegenario-nisu1928
    @joseveintegenario-nisu1928 6 месяцев назад

    This swash plate is installed in many Car Air Conditioned compressors, Wikipedia has an article about Axial or Barrel Engine, eg INNengine, I have no info about overall thermodynamic efficiency of Compressed Air engines, as an experimental QuasiTurbine unit here.

  • @StolenPw
    @StolenPw 6 месяцев назад

    Weird cult

  • @xavierearnst6245
    @xavierearnst6245 6 месяцев назад

    Wheres the compressed air coming from?

  • @chunkblaster
    @chunkblaster 6 месяцев назад

    you're fucking cheating just join the modern world and stop being unga bunga

  • @taeliantalittia612
    @taeliantalittia612 6 месяцев назад

    Are you saying that a compressed air powered vehicle is possible but we don't have it for some reasons?

  • @waralo191
    @waralo191 6 месяцев назад

    So basically they are not rejecting the imdustrial revolution, they are just not moving past the inital stages

  • @TaintedMojo
    @TaintedMojo 6 месяцев назад

    Ahhh yes, compressed air fresh from the compressed air bushes

  •  6 месяцев назад

    Where did the compressed air come from?

  • @Xedilian
    @Xedilian 6 месяцев назад

    Hang on so? you used a piston engine to pump air into a compression tank and then you used it to run air through this engine? Seems counter intuititive? Whats the point in having a an engine run from compressed air when you need a regular single value piston to pump more air back into the tank hahahaha i don't understand why you would waste your time making these? when a regular air compressor does the same thing hahahahahahahahahhaa

  • @lloydmorrison5979
    @lloydmorrison5979 7 месяцев назад

    BUST a NUT! :) Seriously, Great video!

  • @ChoboUnjeon
    @ChoboUnjeon 7 месяцев назад

    this is just an air compresser running backwards

  • @charanak.c4862
    @charanak.c4862 7 месяцев назад

    0:09 They said no fuel or electricity⚡ Wonder how they pump air in order to get at least 100rpm 🤔

  • @user-zs7ho2zv1x
    @user-zs7ho2zv1x 7 месяцев назад

    Thank you very much

  • @theindooroutdoorsman
    @theindooroutdoorsman 7 месяцев назад

    So how do they compress the air to power it?

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Theres various ways they can do this- Such as using a windmill to work a compressor and then they can store the air. Theyre predominantly after a simple "off grid" life style. Its less that they "wont use" technology- and more about a preference for "simple" technology that can be predominantly used on their land without having to connect to city infrastructure

  • @SpencerIsAFunnyOnion
    @SpencerIsAFunnyOnion 7 месяцев назад

    Where do the Amish get compressed air from?

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Theres various ways they can do this- Such as using a windmill to work a compressor and then they can store the air. Theyre predominantly after a simple "off grid" life style. Its less that they "wont use" technology- and more about a preference for "simple" technology that can be predominantly used on their land without having to connect to city infrastructure

  • @laststand6420
    @laststand6420 7 месяцев назад

    Never thought I would say this... But that's some Cool Amish Tech

  • @ImNotCreativeEnoughToMakeUser
    @ImNotCreativeEnoughToMakeUser 7 месяцев назад

    Ah yes, the Amish inventing new machines to avoid having to use new machines Genius.

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Its less about that and more about having things they can use off-grid. For example; They can and do use windmills in order to compress and store air- which can then be used later to power a motor such as this for various needs. All "off grid" methods of utilizing various forms of power without connecting to main city lines.

  • @MrHannatas
    @MrHannatas 7 месяцев назад

    isn't the air the fuel in this case?

  • @byeluvby
    @byeluvby 7 месяцев назад

    Lol. The fuel/electricity/technology used to manufacture? I know forsure they can't get precision like that unless they have some type of CAD

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Amish lifestyle is less about "No technology ever!" and more about a desire to live as "off grid" as possible. Many are fine to use simple machines, but they typically tend to prefer simple machines they can maintain/utilize with what they can make/grow/use on their land. For example: Its not uncommon to see windmills powering compressors so they can store compressed air. Yes its still a "modern" tool, but theyre not connecting to city infrastructure or anything like that to maintain/operate it- such as tools or things that would genuinely require they attach to the city power grid.

  • @LygerTheCLaw
    @LygerTheCLaw 7 месяцев назад

    lets turn an a/c compressor into an air motor, take the side cover off to expose the internals, we won't lubricate it and spin it to 10k RPMs. seems safe.

  • @tomstaples8949
    @tomstaples8949 7 месяцев назад

    I love the air powered meat saw at the Amish deli store near me….

  • @humannotanalien8675
    @humannotanalien8675 7 месяцев назад

    yall have to hope God's rules are open to interpretation I guess 💀💀💀

  • @augustday9483
    @augustday9483 7 месяцев назад

    A lot of people diss the Amish for their choice of lifestyle, but personally I really respect the dedication to a set of ideals. And, if nothing else, the Amish will be able to pick up the pieces of our civilization if we ever get hit with a big CME, EMP attack, or something like that.

  • @chrisjarvis4449
    @chrisjarvis4449 7 месяцев назад

    ok so w how is the compressed air made ? is its gods breath that it run on ? the amish the closest thing the west has to the museums

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Commonly- Windmills that power compressors, so anytime theres even a small breeze theyre building up / pressuring tanks. Its less about "eww technology bad!" and more about a desire to live "simple" and typically "off grid". In such cases theyre not needed to connect to a cities power grid for example- and have their own means to compress/store air on their land.

  • @BigElCat
    @BigElCat 7 месяцев назад

    It looks like the pump in a normal pressure washer, used to spray water.

  • @makoado6010
    @makoado6010 7 месяцев назад

    When idiocy is coupled with diligence.

  • @MegaRyan123456
    @MegaRyan123456 7 месяцев назад

    were are they getting the compressed air from ?

    • @SidewaysGts
      @SidewaysGts 7 месяцев назад

      Windmillls that power simple air compressors.

  • @johnrutherford9454
    @johnrutherford9454 7 месяцев назад

    Isn't that an AC compressor

  • @selfactualizer2099
    @selfactualizer2099 7 месяцев назад

    amish are just dumb people. the idea originally was technology is evil and forms unhealthy habits. Amish inventions are no different then modern tech. You can live like an amish person and still be a part of greater society. all you would have to do is work somewhere, cook fresh produce for your meals, and enjoy your social life my gawd, its almost as if we are living the same lives. The only difference being the use of the internet, or buying more things than you need in life. this makes amish people stupid in my eyes. the problems they are trying to avoid are very easy to solve.

  • @rabidskylark2065
    @rabidskylark2065 7 месяцев назад

    Something seems amish about this...

  • @overengineer7691
    @overengineer7691 7 месяцев назад

    A degenerator!

  • @groig87
    @groig87 7 месяцев назад

    Was tough to watch this vid

  • @NoName-dn8nv
    @NoName-dn8nv 7 месяцев назад

    When they need penicillin not Amish anymore