Видео

Why all that disturbing noise in the background? Annoying!

I got a busted screw that's in the flange I'm taking out a talking like I put in a new flange and one of the screws is busted off the head of the screw broke off and sent a flange so still holding the flange on how do I get that out of there it's on a PVC piping

If your spray arms are not spinning and water pressure is low it's no doubt debris in the turbines as well 👍

More to look for , my pump motor was running at 30 % ( only water to lower spray arm ) ( amp draw while running only .3 A Ohms was 26 K . Turned out motor was fine , impeller on pump was cracked and slipping .

Wielkie dzieki

Could you tell me how to replace the door handle lock catch on the freezer door please?

On behalf of totality clueless,(like me),thanks ever so much. Following your instructions I fitted the door in no time at all.

Thank you! In the upper left corner, a cable is also attached to the door, can I cut it?

I hope this message finds you well! I'm reaching out because I've been following your incredible content on RUclips and I'm truly impressed by the quality of your channel. As a follower of your RUclips channel, I've noticed some areas where there could be opportunities for improvement to further elevate your content and engage your audience even more effectively. Here are a few key points I'd like to highlight: 1. Limited Audience Interaction 2.Unoptimized Thumbnails and Titles 3.Neglecting SEO and Metadata 4.Inadequate Promotion and Marketing 5.Ignoring Analytics Insights Addressing these areas could help take your channel to new heights and enhance your overall success. If you're interested in discussing strategies for improvement or exploring potential collaborations to support your channel growth, I'd be more than happy to assist.

Bin the music😱😱😱😱

*promosm* ☹️

What about when the top pin is broken in the fridge?

what would a problem if water gets to the tub gets hot but doesn't spray?

You are not checking the valve at all. Useless video.

Conitnuity checks vary from pump to pump, basically anything from 0- 300 is normal. If your reading kilo ohms or mega ohms for resistance that’s not good to go

Please read. My experience. Water not drained. I checked hoses. They looked clean and clear. So I wasn’t worry about it. Following the video I decided to buy a multimeter. Checked the water pump for continuity and “Everything ok” like 26 ohms. I still decided to order a new pump from Amazon for $29. Installed it and it works flawlessly. My dishwasher was pretty noisy when new because it has a new and strong draining pump. Last days it was doing very quiet cycles due to, what techs call it, a “tired pump”. Now. At least in my Whirlpool model, I didn’t have to disconnect or remove it from its place and put it upside down. I only remove a plastic cover from the bottom front and squeezed my hands through it. Very ease. First. Disconnect the power. Vacuum all the water. Using pliers, Disconnect the plastic drain hose that goes to the pump. And then. With a mirror. Locate the clip that goes on the other side of the pump. Press it and rotate the pump and voila. Clean and make sure there’s nothing obstructed. Disconnect the electrical plug and connect the new one. Easy peasy. I hope this helps. Salud 🍻🍻🍻

that black component attached to the tub that has two wires going into at 1:22 - what is it called? seems like this is instead the float switch on modern dishwasher. I unscrewed it and there is some kind of plunger that's can be pushed in and it's on spring. I measured the resistance. Pushing the plunger barely affects the reading if at all and it reads 1.7k ohms. My dishwasher is constantly filling with water and then emptying. it is as if it doesn't know when there's enough water in it

What about the handle from freezer door? Any ideas how to fix it ?

How do you fit a handle to a freezer door model no cur55w19

What makes you play that annoying muzak while you're talking

music is so distracting and unnecessary

mine meter reads 120 ohm. the pump is 90w. is that to low or to high?

Thanks man

Does anyone know if the freezer compartment is airtight? I am trying to replace my freezer door with a thermocol and wondering if I have to be cut it so accurate when.making a door

I broke the handle, how can I fix it? of I have to replace the whole door

Saan po kaya pwede makabili ng door freezer ng eurotek epr-80ms?

Mine measured 60 Ohms. Ordering a new one, thanks!

Tanks, but how to replace the handle of the freezer's door ?

This is perfectly explain how water circulate in dishwasher. Thank you so much

I like the detail in these videos. Thanks!

Thank you very much for sharing this video!

thank u so much

Thank you 😊

American and German built dishwashers are much more sophisticated than this basic simple whatever brand!

My dishwasher don't seem to have a solenoid valve inside the machine. Seems like it is included in the aquastop inlet. The aquastop is closed by default, then when current is applied, the magnet lock snaps open and water flows.. Is this reasonable? Or am I missing something? Should there be a solenoid valve in the machine as well?

Hello, I wanted to ask some questions: 1) The first component is the solenoid valve, who commands the opening of the solenoid valve? 2) Which component makes me close the solenoid valve? 3) Which component determines that the water level inside the tank is sufficient? Thanks

The only interesting part was the pointy nose water pump pliers.

My dishwasher is nothing like that one. It would have helped if he had said what model that was.

Thank you 🙏🏻 very much ❤️

Wonderful your video, I am getting help your video watching bit many type of dishwasher cycling function brief explain

Mine says 120V and 50W, and while test on 200 my result is 47ohms... Is that too low? With the link I should get over 100. Ge dishwasher model: pdt660ssf1ss

I have low pressure at spray arms. What can be problem of that? I clean pipes to arms and it seems to be clean. I think it can be circulating pump, but i dont know. Lower arm is rotating, but slow and pressure is low. But higher arm is dry.

How do you replace just the latch on the freezer door ?

Crap video. You assume all dishwashers are the same. Not all dishwashers have a simple opening flour board. Some motors have 4 terminals. Where should there be readings and what should they be. What are incorrect readings. There are so many variables you dont mention.

Awful narration style

how to use only tap water NO HOTwater

yes very. i test 176 ohms instead of 146 ohms written on the manual. should be good or bad ?

Very helpful!

Nice conductors on both wrists

Dyou have a top-load washing machine tutorial? Thanks!