Видео

I just received mine back from Taurus with the same problem I sent it in for warranty work they said they replaced the magazine spring and it feels the exact same way very little pressure to push in button, magazine still drops out to easy. I can not carry this gun I have lost all confidence and can not trust that the magazine won't drop out when I pull it out of my soft holster like it did 3 times in the past.. VERY DISAPPOINTED with Taurus.

The only benefit I can truly see is the guide rod

I'm curious the striker guide on a Glock is plastic just like the Taurus but Glock doesn't recommend changing it especially with a metal one because the surrounding components are plastic as well and plastic to plastic contact is ok but adding a metal one would eat that plastic up quick. Is it not the same on a Taurus

That's really disappointing. The ritr not only can't be refilled but the ink seems ridiculously small, making it very overpriced to keep buying new ones when the ink runs out.

The old 85 grips are, thus far, my favorites for my 856. The new OEM grip not coming up the full back strap messes with my grip, and the bit behind the trigger guard is profiled poorly, so it kills my middle finger. I see you too have been burned by Altamont, I genuinely think they're the most overpriced and overrated grips in the game. I've never had a set for my J or my Colt DS that fit properly.

Not sure why poeple buy tarus guns ive seen so many poeple have problems including me, never hurd of a bad ruger, smith, or colt,

I except your confession 😆

My GX4 has the same problem, Does Taurus have a warranty fix for this ???

where is that holster from or what is it called? thank you

Ever try the Hogue HandAll grips for the G43? I've never tried one myself, but was told that the G43 grips will work on the PF9SS.

Nice gun, but nobody likes a loudmouth.. Lemme know if you wanna sell it..🥃😎👌

You don't hold the trigger back while recycling. Take a gun course 😂

Affectionately 😂 referred to as the SpiderNO Dollarca brand by Spyderco users.

Have this same model. Own many brands and it's the only one I ever returned. F2F on the very last round going from mag to chamber. To Kahr's credit they fixed the problem. I used to worry about capacity. Hog wash. Just having something on you trumps anything else. Recently installed trijicon tritium front sight. Can order from Karh's site. This will continue to be part of my carry rotation. Can't beat the size.

If you use a shop towel around the spring when you install the spring cups it’s a lot easier to pull the spring down.

Beautiful revolver, congratulations on the purchase.

I just got one and the accuracy is - 0.3 seconds a day. Nice.

Slide From Where ?

Good afternoon here in Brazil 🇧🇷. When I port my 85s I usually add two spring-loaded jatlowinders. They are a little bigger, but they are very fast.

Appreciate you, do the grips not quite meet up at the back below the hammer? I was debating between these and the BMT(?) polymer on ebay. Thanks again.

The sear should not have popped up immediately. It should stay down until the slide recoils and pushes down on the trigger bar (disconnector part of the trigger bar). I doubt it would hurt anything to have it pop up immediately, but it's definitely not supposed to. It wasn't designed to do that anyways. I think having a slight bit of over-travel in your trigger can cause that. If the trigger bar gets pushed against the back of the trigger housing where it is stopped, it can cause the trigger bar to drop slightly and release the sear. You can actually take the housing (or whatever it's called by Taurus) and the trigger/trigger bar and then actuate them outside of the gun. Without the striker pushing down on the (top of) sear though, the trigger bar won't always engage the sear. The area of engagement is outrageously small, so that if the striker isn't pushing the sear down like 0.002", then the trigger bar might not be able to engage the bottom of the sear. (You can lightly push it down with your finger if you can't get it to engage if you have to). I like the Taurus trigger design, because it's unique to them and it's a pretty good, safe design... but I think the way they went about the design was foolish, with them making the parts with such an immensely small trigger bar/sear engagement (so even the smallest things can cause failures).

Is it normal for a GX4 to have no audible or tactile reset at all? Like a Glock for example, After you fire it and the slide reciprocates, when you release the trigger to shoot again, you hear and feel the trigger reset... but on a GX4 I test fired, there was no audible or tactile trigger reset at all. I didn't know if that's normal or if it was just a defective one (also the G2 and G3 guns, because they function very similar). There was a very, very slight audible and tactile reset, but it was almost unnoticeable. I'm not sure if people are really right about how important having a tactile/audible reset is, because when in a self defense situation you're probably not going to even notice them... but a lot of people think it's one of the most important aspects of a trigger and that if a trigger doesn't have an audible/tactile reset, then the gun isn't worthy of being a carry gun. Many good carry guns don't have that though... and some guns like the LCP models, the P3AT/P32, The TCP and some others have a "false reset" where you hear and feel two clicks, but only the 2nd one is the real reset. A lot of people hated on the S&W CSX, because it had a false reset... and I think it didn't get a fair shot, because of that. It's not a bad gun in my opinion. Anyways... Is it normal for a GX4 and/or the G2 or G3 models to not have an audible or tactile reset at all?

How’s it holding up?

For the price of all those fakes you could have purchased a real Para 3. You would have the pride of owning a quality knife. What do you get out of buying a fake knife made of inferior materials? You could even buy a real Para 3 used and save money. Real Spyderco knives are not expensive. Spyderco offers excellent value. They have knives that fit any budget. Spyderco even has budget knives that are made in China. You can buy a Real Spyderco knife for 50.00$

The extra screws are for claw deletion if wanted.

Good evening, I'm from Brazil. I have the microcompact GX4 Graphene. When I shoot in sequence, the magazine catch is activated several times, causing the magazine to fall. I would like to know if your modification to the charger retainer worked... "sand the button", or if I should just change it sideways, which I wouldn't like lol. thanks.

Just stamp your own serial number on it. I have a PF940SC that has 1k flawless rounds through it. Serial numbers don't mean anything they are just random characters that a company decides to put on their products. Just stamp your own serial number on it. Either that or send it out and have it serialized - wouldn't cost too much. I think that totally goes against the ethos of building one of these in the first place, though.

Amazon is selling Spyderco and Benchmade clone knives - exact copies just no trademark text or icons of the genuine knives.

Problem: very slowly pull on trigger closest to barrel. above the trigger safety. trigger will go in mushy, but no click (striker did not release). let go of trigger and try pulling trigger again. no fire. jiggle gun or tilt the slide to right side and the striker pin will release. pulling the trigger roughly again will also release the striker. Analysis: the striker edge is caught on the sear. maybe the metal is rough, so jiggling the slide will release the striker. Solution: take apart the gun, remove the striker. Using blue polish stuff + dremel, polish the striker lip/edge and the sear on the slide to a mirror finish. No more trigger problem. Without any gun oil, the trigger should release the striker smoothly. Add oil and it is a buttery trigger.

Concealment of a n outside the waistband revolver is something you have to dress for ( ie you wear a t shirt or other type of outer shirt with the tail out

Ordered one of these for my CZ P10S, should be arriving today, actually. Hope you've gotten your GX4 straightened out since you made the vid. BTW, the extra screws appear to be for your retention screws if you decided to remove the wing/claw. Without that in place, you would need shorter screws.

Link for that holster?

You are correct. This problem happens on my G3C. Side pressure on the trigger will cause the trigger bar to miss the sear, which results in a dead trigger. These triggers may fail under stress. I do not trust G series as carry guns. They are strictly range toys for me. P.S. I feel scammed by Taurus because they know these triggers are bad for a long time.

Chinese pot metal! Definitely not any steel worth anything! The price tells you everything! Buying counterfeits supports the criminals selling that shite! Fk em! 👎

Just ordered a GX4 XL. May put this kit in it. Kind of wonder how much that pencil would have jumped from the old springs, though. Appreciate you going to the trouble of showing us how. If you don't mind, keep us updated on how we'll the changes work.?. Thanks.

Faster please, I do know how to change a grip, but watch just to reinforce my opinion! Teaching is an art, and most people are painting by numbers!😅😅😅😅😅

Do not store batteries in metal containers

Link for the grips?

Ive got several p80s now that came out perfect. I didn't hesitate to build one of these out. It came out like trash though. the frame was ok but i think all the aftermarket parts i put in it were trash. Im gonna build another quality upper and get an oem parts kit upper and lower before i give up on it. 😢 My other p80s came out so well I am really sad about this one. I have a patmos slide, avoid at all cost. Cheap slide was not the way to go even though other have had luck with them i got a garbage slide. And the ets 43 mags kind of suck. My other ets mags are legit but these little single stackers are not😢😢😢

I'm getting the CARRY soon & ported LLC Barrel 😎🪖🥾🥾💣💣💣💣🔥🔥🔥🔥🚀

Coyotes do you see that type of reflections

Fake knives start (3:25)

I just found your channel and I subscribed. I just got the CW9 last Friday. Definitely worth the money on kahr especially being American made. God Bless from Oklahoma.

Is it me or is this guy whispering ???

That polish job looks nice! I'd like to do my whole 605 like that. I have a bench grinder. Did you use one with a felt wheel? Any polishing compound? I used to have a Rossi medium frame .357 6" barrel unfluted cylinder that was semi polished and a S&W 686 stainless that was polished very nice. That's the look I want, but I don't want to make a mess of it either. could you show how you did it?

Great video my friend and nice Taurus you got there. Few years ago I was having issues with a Ruger Blackhawk that I bought used the cylinder didn't rotate freely because the rounds were rubbing the back where the firing pin is, I call Ruger Ruger customer service and they sent me the label to send it back to them, they fix the head space i think they called for free, no issues now awesome customer service.take care and stay safe.👍

Run to the mountains 😂

How did it shoot afterwards? Recoil less?

The older Taurus boot grips actually shot well. With .357. mine, the brass emblem kept tarnishing and getting gooey green on my hand.

Anyone who watched Mac Gyver knows the importance of this 😂