- Видео 36
- Просмотров 134 213
Guillermo Cuellar
Добавлен 13 ноя 2022
Hi everyone, welcome to my channel. My name is Guillermo and I owe a 2016 GT350 Mustang. In this channel I will be discussing my experience with the car and what I consider to be some of the best modifications that you can do to your car as a car enthusiast/high performance driver. Also taking you along with new plans that are to come for the car in the future as well as track and high performance driving.
PMAS Intake for my Shelby GT350.
In this video I upgrade my stock cold air intake and show you the installation of this PMAS cold air intake. I talk about some of the benefits of this particular brand intake and why it is a very good product.
Просмотров: 464
Видео
Ford Shelby GT350 Backroad Driving
Просмотров 2,7 тыс.9 месяцев назад
Ford Shelby GT350 Backroad Driving
Boosted F150 vs GT350
Просмотров 463Год назад
This video is focused on a friendly race against my friend’s f150 boosted coyote truck against my bolt on GT350. This race shows the advantage and disadvantages of gearing, weight, and aero and how it affects the outcome of a race.
GT350 and Coyote Mustangs Sights and Sounds
Просмотров 1,3 тыс.Год назад
GT350 and Coyote Mustangs Sights and Sounds
New wheels, tires and wing for my GT350
Просмотров 1,9 тыс.Год назад
I finally upgrade to a squared setup on my gt350, I show you what you need to do in order to run a setup like this, talk about the pros of a squared setup and lastly putting these new tires to the test at my local scca autocross event.
Combating high IAT’s on my GT350
Просмотров 1 тыс.Год назад
In this video I talk about the benefits of having low intake air temperatures, I talk about how good the air intake shield is on the gt350s from the factory and I show you how I make it even better to block hot engine heat away from the filter, resulting in lower temperatures and increasing overall performance.
Installing a tubular K-Member on my GT350
Просмотров 1,8 тыс.Год назад
In this video I show you how to install a k-member on your s550 mustang. Also talk about some of the benefits of this modification. Part 1 of this video consists on an intro to why you might want to consider this product and how to take the stock part out of the car.
Michelin Pilot Sport 4s and SVE R350 Wheel Review for Shelby GT350/Mustang GT
Просмотров 6 тыс.Год назад
In this video I give you my feedback on the SVE wheels for the Shelby’s gt350 as well as the Michelin PS4S review. Link to get the sve wheels lmr.com/item/WK-177912H/sve-r350-wheel-kit-black-19x10-11-15-18
How to install Trackspec’s heat extractors
Просмотров 277Год назад
In this video I show you how to install heat extractors from trackspec. This is a very important modification specifically if you’re looking to keep the temps low at the track. Even street cars benefit from this. Creates more downforce, cools engine bay, and decreases drag.
How much does the GT350 actually weigh?
Просмотров 1,4 тыс.Год назад
I take my car to Loves to find out exactly how much it weights. Buy lightweight parts here: Antigravity battery: www.amazon.com/Antigravity-Batteries-ATX20-HD-Polarity-Management/dp/B07WLZ6H4X/ref=as_li_ss_tl?dchild=1&keywords=anti gravity battery atx-20 hd&qid=1591043133&sr=8-6&linkCode=ll1&tag=faymmedi-20&linkId=274a3e216ed7401d59df7d3f695c63d8&language=en_US Steeda lightweight bumper support...
GT350 Ghost Cam Tune
Просмотров 3,7 тыс.Год назад
In this video I explain how a ghost cam tune works as well as revealing my mustang’s new look.
How to recharge A/C system for $30
Просмотров 85Год назад
I show you how to easily recharge the AC system on your car using a product available at most auto part stores.
GT350 Mustang two year ownership review. Part 2: The Likes
Просмотров 7 тыс.Год назад
GT350 Mustang two year ownership review. Part 2: The Likes
GT350 Mustang two year ownership review. Part 1: The Dislikes
Просмотров 2,6 тыс.Год назад
GT350 Mustang two year ownership review. Part 1: The Dislikes
Track day at MSR Houston does not go as planned.
Просмотров 7 тыс.Год назад
Track day at MSR Houston does not go as planned.
Dialing in alignment on my Shelby GT350/backroad drive
Просмотров 2,8 тыс.Год назад
Dialing in alignment on my Shelby GT350/backroad drive
How to slip the clutch. Launching techniques.
Просмотров 11 тыс.Год назад
How to slip the clutch. Launching techniques.
Why you shouldn’t be afraid of the Voodoo GT350 engine.
Просмотров 19 тыс.Год назад
Why you shouldn’t be afraid of the Voodoo GT350 engine.
How to clean engine air filter (Shelby GT350)
Просмотров 2,4 тыс.Год назад
How to clean engine air filter (Shelby GT350)
How to shift quicker on your s550 mustang
Просмотров 6 тыс.Год назад
How to shift quicker on your s550 mustang
I've owned my 19' GT350 5 years now and it's still a blast to drive. Mine is a stripe delete as that's what I wanted and I was lucky to find one new on the dealer lot. I also like the clean look stripeless with the stock wheels, your SVE wheels look great. The sound is just so different from everything else and with the stock Active mufflers with the resonators deleted it's perfect for me. I agree with the crackles and pops on deceleration...just an added bonus.
Hey man love your outlook on everything with the shelby. Beautiful car! I recently picked up a 17 gt350 recaros and tech pack. Loving it. Would recommend it 1000% so far. Things to keep in mind with the gt350; properly warm before higher rpms and check oil frequently (use amsoil). I think the issue with these cars was mostly the owners not maintaining it properly and burning the engines up. On the other hand im sure some were defective because they are hand built. Regardless enjoy! Great content
perfect video, I was looking for something like this
Does this add any real world power to the gt350?
saw bakers car
If you are drag racing get a clutch release controller.
Black looks great. Is it a wrap to new paint?
Thank you sir, and it’s paint
Great car, yours is a beauty. I just bought a '17 and love it
The wrong way somehow looks faster lol
Dope car bro ! No matter if black or white…always a good looking shelby!
2019 GT
steeda makes a aftermarket clutch spring upgrade to Calimer mt-82d stage 2 MGW spec 2 mmr pulse ring My McLeod rst crapped out w 10k, so I went w Mantic 9000 boobma transmission mount steeda differential brace DDS 3.5 solid aluminum driveshaft G force half shafts FHP differential BMR motor mounts Aluminator 5.0L 12:1 n/a bmr k-brace and stop the hop braces. Steeda differential bushings. check out StagMode Zander13 Engineering Explain & Scotty Kilmer.
Nice video man. Car looks awesome
What headlights did you install?
Those are the oem ones I just opened them up and blacked out the amber reflector
is that an R?
That's too front heavy. About 55% front and 45% rear. A light rear will make it loose grip and spin around at low speed.
I’ve never had an excessive oil burn issue either with my 2017 Shelby.
Does it sway a lot when turning? The old fox body days the car felt like it'd tip over lol
Nah these s550 even if you get the base still feels pretty good lol I’d say a base model s550 is just as fast if not faster than say a s197 boss 302 around a track just cause of the suspension and IRS
Hi how you doing? You go to MSRH regularly? I run about the same time over there. Looking for some track buddies. I have their membership. We can go over there together next time.
Great vlog. (LOVE these cars) . 1) break in from brand new is absolutely CRITICAL to oil usage, consumption etc..(if the original owner regularly cold started and romped without proper warm up bad news 2) proper warm up for its Entire life is ALSO critical (far more than your standard vehicle, this is a Race Engine) 3) (obviously) maintenance. 4) proper tool to proper torque specs for the first gen spin on filter. Great vlog 👍🏾
What are the advantages of this mod?
I have a video on the benefits of this mod if you’d like to watch it, but mainly it’s for weight savings
I’m getting the same CAI lol
Esta perro El Mustang
The jlt intake on my gt350 works better than the stock
The vibration is generated by changing the engine mount, do you think that by leaving the original engine mount there is no vibration???
Hopefully I can bring my Mustang this year to one of the events!
One thing is this is common sense but let your car heat up if its colder outside. I like to let my oil temputure hit atleast 100f before driving off. Then alteast 140 before even starting to get on it with coolant being fully to temp. I have roughly around 60 track days over the last 2 years and no oil compustion yet. The worst thing I have had happend is my serpentine bent blowing off and the car over heating. Plus some wiring harness issues. I have had more transmission issues than engine. Had a slave cylinder go and a seprator plate between the engine and transmission both require a transmssion out.
Damn i got to get a set of those for my 17! She's looking good man, keep it up!
Very well done video! Just got my own 2015 coyote and this helped a lot. Thank you!!
I’m glad it helped!
Big up hermano Sick vid
Sexy ass car. Just needs one mod, an owner swap (me).
<3
Sunset made this video even better❤
she looks so good gawd dayum bro
After watching a millions tutorials. This one just finally made it happen for me. Was having trouble with putting my power down
What hood is that?
👌🏾❤️👌🏾 nice, but damn 😖 that’s heavy…… I’m trying to get my Porsche 997S under 2700lbs.
Badass shelby enjoy your car 😊
😎👌🏻💯🔥🔥🔥
Where did you get ford center cap for SVE R350 wheels?
I just used my stock ones that came with the stock wheels
Get the ford ProFormance seat delete it's worth it I got it and no other kit out there compared to oem finish.
In Texas I might be moving there how do you get past emissions with the cat delete ?
Message me on Instagram, @track_driven350 I can answer that on there
This is some good content
Thank you for the foot footage definitely now have a good understanding of the foot work I’m try this and upload a video credit to you 💯
i agree man, the gt350 looks the best out of all the models. i love your car, looks great. there’s no way i could have this and drive your other mustang daily. lol. god forbit a 5.0 rolls up trying to show off, and your stuck lol
Hey there. Noticed you have your front bumper strenghtened with a pin of some kind (next to headlights). Might telling what that is exactly and where to buy one? Thanks
Yes, due to the tabs on the bumper breaking off. They’re by a company called quick latch. I got mine from Amazon
Hey brother, great video. I let out that clutch assist spring and I can feel it so much better. Do you know if this could potentially cause any issues or sag in the pedal?
I’ve heard that from parts companies before but I have personally taken it out and never experienced any issues before. I’ve done it on all of my mustangs and people I know have done it too and no issues at all
Any issues with how low you dropped the motor ?
No issues at all so far. Mainly did that in case I ever do a CJ. And lower center of gravity.
@trackdriven350 ok awesome my shop asked me because there installing thr k member currently. Thank you for getting back with me
Her car sounds Dope!!!