Видео

No rubbing. Thats the setup I want 24x14. It will look dope

I think it was a spacer it came with the kit

@@Bitchimaking Oh ok. Are you running 40x15.50x20?

@@turbocamaross5.323 Yea that's what I'm running now

What kit ? ​@@Bitchimaking

It hits hard on bumps really stiff suspension.

@@Bitchimaking That's what I have read. Is it bad enough to where you regret lifting it? Your truck looks super clean

I'm not sure how old are you but if your still young you won't mind it. The comments and looks you get from everyone makes up for the bumpy roads your going to hit and feel. But to be Honest I dont regret it at all. And thanks I have more stuff to do to it but its Winter and it's real cold to work on the truck.

@@Bitchimaking The way you worded that is perfect. That's exactly how I am. I dont mind it being a bit of an uncomfortable ride if it's going to look as nice as your truck. Did you have to modify anything or is it just the kit straight from rough country

Nothing else, just strait from rough country and wheel spacer on the front tires to clear the tire rubbing on the leaf spring. That's about it. Are you going with 40s too?

@TurboCamaroSS 5.3 They are stock ones.

Exactly what I want to know

I did change the turbo wheel to a wicked wheel 2, together with alot other stuff. It could be just I'll rev it up see if the nice goes away for a bit.

Cristian Camacho maybe oring that goes from inside the compressor housing to backing plate. Did you have the exhaust manifolds off?

Pulley of some kind

It’s from the turbo bruh

Fizzi It rubs if it’s not on a even ground and turning but if it’s even road or it doesn’t. Not bad tho.

Power beast oh nice

Greg D It’s real bad, you’ll loose all of the power. I’m currently Working in the Engine to bring up all the power and torque..you can gain power with a tuner but your engine will be working a lot harder that’s why I recommend changing components work on the engine and then get a tune. The MPG are terrible too.

Power beast lol I saw that first sentence coming

BIG Z It’s a 4x4

I have a 2000 Ford F-350 7.3. I need a 2wd 8” suspension lift! Please help. I can find any!!!

Is it a dually? Fabtech has a 6 inch lift kit just add a 2inch spacer (suspension block)you’ll make yours self an 8 inch lift kit.

cristian camacho no, it’s not a dually

kelly kilpatrick Twin CCFL Halo LED Projector Black Housing Headlights

kelly kilpatrick Thank you! You can get them on EBay or Amazon

cristian camacho Awesome! Thanks for the info!!

Chaz S. It’s rough, it’s stiff. I have rough country on a Jeep and it rides smother, I think my truck rides stiff because it has leaf springs newer models is just springs and shock absorbers.

cristian camacho thanks man really appreciate it been looking at a couple lifts for my truck

Chaz S. What year is yours?

cristian camacho 2002

Chaz S. I think 2004 and older all brand of suspension is going to be riding stiff.. Leafspring problem :/

hobo bum -44 With a 1.5” spacers on the front.

Richard Wampler No they are stock regular No cut offs

Ryan Rudnicky It's crayze, now is looking better.

KLLSWITCH 8 inch by rough country

thanks for the info.

Alex Watts it's all suspension.

Ashley Simpson It has a front bracket from a leveling kit I think that gives it 2 more inches in the front, but the back has 8 inch lift. Going to remove it some time hope it won't rub. Also have 2 inch spacers to turn all the way.

I just installed a 8" Rough Country lift on my 02 F250. How much Carrier bearing drop do you have? And does it vibrate on take off? I installed the drop kit from Rough Country but it's too much and the angle at the transfer case is too steep. HELP! Lol

Jeremiah Headley general rule you want to shim the carrier bearing 1/4 inch for every inch you lift. Hope this helps

zach wells Man I have shimmed until I'm done. I ordered a one piece driveshaft with a double Cardan front joint from Driveshafts of Tulsa. I couldn't get the vibration out even after installing Trac Bars. I appreciate the response!

Jeremiah Headley gotta have a dual angled shaft and it needs to be made longer