Видео

You may need to lift the pressure foot and slow down the machine.

Thanks for the sub. I hope you enjoy your printer.

I prefer this one. Faster and better print quality

In printxp are you cleaning both heads?

@@overflowvinyl yes, I am doing a full cleaning and then gently wipe the outside of the plates with a wipe. I have even cleaned it with the cleaning solution

@handmadechiccrafts3463 can u see whit ink in the tube?

@@overflowvinyl yes, I see white ink in the lines

@handmadechiccrafts3463 I would get in touch with tech support. They are pretty good. But check that your white ink tank is full. If this is a new printer I'm thinking your ink isn't pulling in from somewhere. If you've been using it a while then you may have a clog

Brother 1055x

Do u have the red button pushed in

I dont have any direct videos but Uninets provides software is basically a rebranded cadlink, and there are tons of cadlink videos that should help

Do you have the air hole (the smaller plug) open on the ink tanks

Yes@@overflowvinyl I think my blue may be clogged. I followed the steps from this video. Everything printed but the blue

I only washed it once. It cracked a little. Sure it would only have lasted about 10 washes.

Unilateral.

@ggelitecreations mine is doung the same thing. Did you ever find a solution?

Printed unidirectional

The same way that you would a feed a roll

No, never

Sure is!

Its basically a rebranded cadlink. Try searching ink videos on the cadlink software

Thank you!!@@overflowvinyl

I've had both. Some rolls pull others stay straight. But I dont have my feeder attached to the printer

@@overflowvinyl interesting.... when i was putting it together i noticed the pre made screw hole was way way to far over... R u happy with it bc i have been workingbin it a week now and im a mess. The masterclass was terrible... i just put the ink in tonite and did the lines and then tried to do the nozzel check and all that and the paper just keeps crinkling up. Ive been thinking of returning it bc i see a lot of issues trying to get it to print. I know its a learning curve but goodness🤣😂

@natashacrawford6716 I am satisfied with it, but now looking to upgrade to something faster.

I have the same problem with the roll feed. I wanted the roll feed because I didnt want to waste film but im wasting film because it spits out like a foot of film @@NatJanDesigns

@@michelleunderwood5283 I hate the roll feed... i originally wanted it to make larger prints than the sheets and machine will barely print it. I believe now.... of course after the fact if ur going to invest in one of these machines for business just get the commercial ones.

Did you wait to do the onboarding training before you installed inks

@@overflowvinyl the onboarding training they sent was for the dtf 100 so set up is a little different then the dtf 1000 ...but I got it working other then nozzle clean...when I try nozzle clean it says memory card error...mine has the roll feed and one on video was a single sheet feed...I followed the manual as well

@@bscdesigns37745 same here they sent me the dtf 100 set up.. were you ever able to get it set up and how did you do it?

It is actually a very simple program.

When that happens I pull the roll out and re-feed.

Everything has it own set of hiccups, but I would. This printer has been an workhorse for me. Prints all day in my shop.

I can't get this printer to print without constant issues daily! I even bought the shake and bake combo that I can't hook up due to constant issues.

Hi. Not understanding your question

@@overflowvinyl u did print in stock ecosolvent printer ? apply powder after dry ink or before ?

@@FranciscoAngelini before

Faded? No. You have to play with your white ink settings. I'm at 70%

@@overflowvinyl That’s what I was thinking. I set up my rip the same way I did for my other printer, and I thought that could be my issue. My white for black is at 80, and I have at 100 for the other colors. I am going to drop to 70, thank you

I just can't win with my blue combination for some reason do you have any advice?

@@davidcrawford5552 are you using uninet ink?

I use my printer 6 days a week so I'm not the best person to speak on this, but I would suggest changing the dampers to printhead cleaning solution when not in use.

We own a DTF Model J Fusion, it's basically a uninet 1000 rebranded, it was great for the first 3 months for us, a life changer, then every 2 months problem after problem... Here we are 2 years later with 2 dead ones and dtgpro don't know what's going on with them... Time to buy a Thunderbird p6800 I guess lol

Haven't used the L1800, but my understanding is that this is basically an L1800 with a remodeled body

@@overflowvinyl I believe this one is faster thou, how long does it take to print a 12x12 transfer? Mine takes like 18m

@@XicoFlores777 7-10 mins on unilateral printing

@@overflowvinyl in your honest opinion, do you recommend getting one, or investing on something more professional? I have an L1800 but parts are breaking already

@XicoFlores777 I've had mine about 6 months with no real issues. I print 5 days a week as I have a storefront. And I do maintenance daily. I don't know what your daily output is and what demands it would put on your printer, but I have no real issue with this printer. If you do decide to go with this print, please consider using the link in the description as it helps keep this channel going. If you decent not, please keep me posted on what machine you decided to go with.

Yes, I know. I was just trying it out with eco solvent ink

With all equipment, there are ups and downs, but this has been going pretty good for me so far (4 months). I print 5 days a week, pretty much from 9-5, and I do maintenance at the end of every day of use.

At the end of the video. That's all there is to it.

I do daily maintenance. Takes about 3 minutes. No issues with the white ink at all.

@@overflowvinyl Appreciate the info, trying to decide between this and the prestige

@macnificentkustomz8711 I believe Prestige just discontinued their desktop model. Double check me. But if you decide to go with this one, please be sure to use the link in the description of the video. Helps to keep this channel going. Thanks

@@overflowvinylI tried to purchase the Prestige A3+ R. I was sent the DTF Galaxy. I found out on the back end they rebranded. My machine was defective and it was a hassle returning it even though they confirmed that it had a rare issue. I finally just got my refund. Now looking for a good affordable DTF printer

@@vibrantvuesaccessoryboutiq9070 ah ok

I used Eco Solvent ink without white. It adhered well. But I experienced color fading after the first wash.

@@overflowvinyl does the print come off? because I have an eco-solvent printer and I want to use it because I don't have a dtf printer thanks

Doesn't come off but it fades. But I think that mainly due to not using white ink

@@overflowvinyli will test it and i tell you

@@overflowvinyl can you do this test again with the white ink base along with the DTF Powder & curing, also try using both the transfer sheets (DTF & Eco-Sol printable HTV), would be great help if you could