Видео

Hi! 12 rpm. / 1 min.

Yes, this charger is smart and versatile, for different types of batteries! In a recent video I showed how I tested 18650 batteries. I also charged small 1.5 volt batteries there.

@@Robotics_Robot thanks

For me. 05.

I don't quite understand what you're talking about? Buzzer are all the same, you can find them everywhere in electronics!

@@Robotics_Robot I mean, I ask permission to just record the buzzer sound in your video, because mine is broken. I need this for learning

It seems to me that it is broken, like it worked a lot. Measure the 18650 battery with a simple tester, after charging it on the LiitoKala. :)

@@Robotics_Robot i bought from other seller and it's working properly now

I'm very glad that you liked my video! :)

Hi! I ordered this from local online stores, they only work in Ukraine.

I don't understand what you're talking about.

I didn't notice. What does it mean and what is it responsible for?

@@Robotics_Robot seller said.. Seller: The brand has intentionally done this as another way to verify genuine products versus counterfeits. The meaning of this text is clear to everyone; it simply involves changing "s" to "a" for easier identification.

@@Robotics_Robot but your battery have word FLEAH?

Seller said The brand has intentionally done this as another way to verify genuine products versus counterfeits. The meaning of this text is clear to everyone; it simply involves changing "s" to "a" for easier identification.

@@JamesCarlLamug Ok.

Yes i know i had to check everything for the video. But I didn't have much time to shoot a video, and I wanted to show only the main thing, how to quickly disassemble and test all 18650 banks. There were a lot of bad ones, they sat at 0 without recovery, so there was no point in shooting a lot. I use such old 18650 banks in my projects and homemade Power Banks.

@Robotics_Robot me too, i mainly buy used battery packs from local scrap company. Sometimes only 2 was bad in pack, but in majority of situations always is 50%50%. Of 100 in pack 50 are bad ( bad IR or on 0V ) also using it im my DIY. Greets

@@soulbrothers7789 Yes, that's what I meant! It's cool when you make your own inventions. Thank you!

Hello! Thank you for your comment. The tool is new so it was just a quick unboxing and review, I haven't worked with it yet. And without language, because there is an accent, I'm improving my videos little by little.

Hello! Yes, I was in a hurry and didn't have time to film everything at once. I will film the 3rd video review of this engine, in which I will completely disassemble and study it. This engine is very interesting, it is a legend. Regarding starting, I did not start it, I read a lot about it. This engine requires special fuel, and I do not have such components now.

@@Robotics_Robot from memory you can make your own - parrafin ( kerosene) 2 stroke oil and ether if you can find it or substitute good luck

@@pollywollydo Yes. Thank you!

Hi! What type of DC motor do you mean? There are two, I didn't measure the shafts, maybe 0.5mm. I need to measure them accurately. I just don't have a spare DC motor to measure.

This is a brief overview of a compact and powerful microcontroller.

It's an interesting idea, but this lantern doesn't have that feature.

I'm between this one and the CL30....mist of my gear runs on 18650 and I don't care to have another battery type.....any recommendations....

I don't understand what you mean. The tester is good.

Hi! I think it will work. The board has proven itself well in my projects. It gives good current and voltage. I don't know about interference, I haven't checked it

I didn't understand the question. If you meant rpm, there are 12.

@@Robotics_Robot he is asking what the torque is, its very hard to figure it out as they all list it at 10kg/cm online but it doesnt make sense that they would all have the same torque when they have different gear ratios

@@janramonmartin Hi! Yes, they all have different torque. But the power is the same. For example, a 120 rpm gearbox will lift 1 kg. faster than a 12 rpm gearbox. They are very powerful! Depends on what projects you use it for.

@@Robotics_Robot yes I found a spec sheet in the end, apparently it has 70nm torque at 12rpm which is very powerful, would probably destroy the gears if you actually tried

@@janramonmartin Yes. Thank you.

Hi! Yes, the black motors have proven themselves well. I think they can be used in your projects. You just need to know what voltage you will have and what gearbox you need for the speed in the project. And you are done!

@@Robotics_Robot So at 12V an 8A power supply is enough?

@@spacetravelDEV Yes! That's enough for one engine.

Hello! Yes. The video will be on the channel soon.

@@Shruthi-op7ji Hello! I did the project a long time ago. There is a normal code. You can find a sample code in the comment below my other video. L298 driver. They are similar.

@@Shruthi-op7ji With this video, the code is in the comments.

Hello! Wow, what a detailed answer! You are probably a professional in the instrument. Yes Wera Joker Wrenches are good. Thanks for the great comment.

Hello! I do not understand your question.

@@Robotics_Robot Descobri já, obrigado pela atenção!

@@cassiocallinssilva1617 Ok.

Hello! What driver are you using? Or Arduino?

Hi @@Robotics_Robot im only using pwm driver.

can you help me with the wiring diagram of a joystick potentiometer to pwm dc motor speed controller

@@coolkalangjack If you want to connect to exactly the same driver as in the video. It's unlikely that you will succeed. The joystick has a potentiometer in the middle with the value set to the middle value. And the potentiometer has values ​​from 0 and above. The engine will start from the center position. If you do this on an Arduino, it can be removed programmatically. And if it’s the way you want, I don’t know. There, then the joystick needs to be disassembled and the springs removed so that it is from the zero position, and not the central one. And reverse will still work on the buttons. If I have time, I might make a video on this project. I will try.

@@coolkalangjack Ok.

I was glad to help!

Hello! Yes, the retaining clip can be removed. And carefully strip the wire to the required length. But in the original the length was 12 mm.

@@Robotics_Robot thanks because in my country its important to have atlest 1inch or more for splicing and then using Electrical tape, but since it can be remove i might buy one for work thanks for the info xd

@@musichead4555 There the latch is pressed with your fingers and adjusted to the desired distance. But if you press harder with your finger and pull down, the latch can be removed and put back on if necessary.

Hello! Yes, this is a universal charger, it charges all types of batteries. There is a special large place for large batteries.

@@Robotics_Robot thank you, just ordered mine. It’s on the way.

Hello! It was a flexible coupling for fixing the central shaft of the engine! Sold with motors.

@@Robotics_Robot on Amazon?

@@akeemgriffiths4459 No. I bought motors on another electronics site.

?

Hello! There are a lot of setup videos on the Internet. You need to short-circuit the probes and adjust the desired voltage and current. Each model has its own settings.

Hello! Yes, black engines are reliable and expensive. And whites sometimes have problems with the gearbox. You can take a black motor with high speeds, and put adapters with large gears on it to raise the speed even more. The principle is like riding a bicycle.

Yes, you can, but you just need to connect everything to USB. There it produces from 5 volts to 3 amps. It seems to me that it’s easier for you to choose ready-made USB chargers that have 12 Volts or higher at the input, and a stable 5 Volts at the output.

@Robotics_Robot doesn't the output of mini560 is constant 5v ? Does it change ? Also isn't it good to have 5x3 = 15watt for charging ?

@@vagkos3060 Yes, you are right. There are just smart chargers that regulate from 5 to 9 volts. Modern phones are charged from 9 volts, not 5.

The main thing is to connect everything correctly. And understand what kind of phone and what kind of charging it should have in the original volts.

@@Robotics_Robot wow for real? I didn't know that new phone use 9 volt. Every day I learn something new

Sorry, this was done a long time ago, there is no code. You can find the code in my previous video. Driver l298t for Proteus. The code there is the same, only slightly modified for 2 drivers.

hey man get your own comment script

Thanks for the nice comment! I'm glad you liked my video. As for the music, I thought the video would be more interesting.

Freedom rules the world.

@@Robotics_Robot at least the pursuit of freedom...

@@rickdeckard1075 Yes. I'm from Ukraine!

I think that everyone knows how to use them. I just took a short review of their characteristics.

@@Robotics_Robot oh my mistake, i had the audio muted

The lower holder is always a minus of the battery. It is necessary to set the type of charge, charge or discharge of the battery. If you charge 4 at once, they heat up, then they should turn off. But it is better to watch this technique!

Not really. The tester is new out of the box, everything measured correctly.

I filmed as best I could. I'll make a better video in the future, thanks for the advice.

Certainly. It's not real. It's just an engineer's joke.

This is a microcontroller. You can use any transistor or l298n.

Yes, the Proteus program works differently in everyone. I have many additional updates and libraries installed on it. But the program is very useful!

Thanks i have a programme but it doesn't loop can u help me