Видео

@johndillinger3988 yes sr u can

@boosteddave4603 thank u for the super quick response 😀 😎😎other channels don't respond or they respond like 5 years later 😎

@@johndillinger3988 lol 😆 I try to get to every comment asp lol

I just seen in other comments that you were running stock… question answered haha

I’m about to do my own.

@@81mccabe58 it was Na only mods where catless delete, hellcat airbox,and tune. But the oil pump went bad on the wot. And then I did this new forged bge block and whipple

@@81mccabe58 what set up are u going with.

@@boosteddave4603 yeah man, I only a professional drag racer and he says these supercharger companies are liars when they tell you to add it and tune without forging the engine, new fuel pumps the lot. It is only a matter of time but to you do it right it will run like a dream for years

@@zackgordon8173 it all depends on your budget. U can upgrade the head to 03 or 04 eight thread heads or some trickflow heads and a Whipple

@@boosteddave4603 what do you recommend?

@@boosteddave4603 and thanks for replying bro

@zackgordon8173 no problem anytime

@@boosteddave4603 would you recommend finding 03-04 pi heads or buying trickflow heads ?

@@enzohp13 13,500 plus shipping

@@boosteddave4603 I ordered one last week for 6000$ +650$ shiping for dodge challenger 6.4 model 2015,Is this price reasonable?

@@boosteddave4603 why the H&H auto pats price is so low?longblock cost 6000$,Is there a reason?

@@boosteddave4603 Why is the price longblock of H&H auto part parts low (6000$)? Is there a reason?

@@enzohp13 with the forged assembly and studs ND bolts and cam and upgrades oil pump bolts and gasket and blue printed for 1000whp+ makes the extra amount

@palmtree9221 it's has differences between both, the cast iron apache vs high Nickle content iron. The oil and water passage are better and it a way stronger block, they use them on the heavy duty rams. It's a great foundation to make big power with the right set up

@Ozziie415 thank u bro and will do

@@Fox_Fitness_And_Racing no rattle noise. Mite be your converter that's is going out. Mine would just shift super hard at any speed between shift

@iglesiamusica2913 thank u bro.. looks way better now. On my single cab.

@@marty4645 thank u appreciated

@carwashpowerbrake2779 thank u. Just waiting on the new throttle body. Ones it's here will bring u all for the tuning process

@@thelastslime3007 💪

@joseaguirre2082 we back brother 💪

@joshvelez2906 hhp/bes custom boost grind cam. I don't remember the specs when I get home ill post then here

@@tonymccoy5032 thank u

@OscarRamirez-yk5yq it was turbo when they had 1st brought the truck a while back. Different owner, I know both previous owners and a little about the 1st original owner. But the miles have been same since then

@@boosteddave4603 I almost bought the truck here in Cali I drove it and all had a single turbo but it had less miles in the cluster than in the paper work basicly shows around 63k something like that and in the dmv showed 73k I might still have pictures on my cell I remember seeing it after with less miles back in Texas maybe someone messed w it truck was for sale for 13/14k

@OscarRamirez-yk5yq oh dang I didn't know that.. one of the previous owners had seed that the turbo kit was done by Mike murrillo in san Antonio tx around the year 07 around that are or later.

@@boosteddave4603 yes I actually messaged Mike Murillo and he said he didn’t

@esaay2167 thank u bro will do 💪

@TheTruthBeToId it's been a while lol 😆 been having to much work in my job. That won't give me enough time to work on my car as I use to

@richardmacias4463 it sucks bro lol and the Whipple sit way lower never had issues before

@@boosteddave4603 yea honestly scary asf when that happens no doubt. I had the 15 inch drag pack so it wasn't spinning crazy like it would on street tires when it first happened but still scary asf.

@richardmacias4463 it's a scary thing bro.. and plus the lightning I was using is so dang expensive and o4 with super low miles lol

@@juansblue98 it's a 2.6l bro

@@boosteddave4603 Gracias im looking to get something like that for my Harley .

How much power do you think full exhoust with that kenny bell.

@juansblue9898888 I don't remember the dyno numbers on this one but it's around 700

@@boosteddave4603 hey the comp cams 102600 think there smog legal? Thanks Dave.

@chrisglory5695 thank u and on a stock motor 6lbs is max u can do. I've seen some last and some blow the motor. But it comes down to the tuner

@@HoodStarTv jms wheels

@adolfovazquez9207 the long block was 13.500 shipped from hhp racing. whipple was 10,800 stage 2 I did all the labor my self and plus the new bolts and gasket, 1320 stall and dusterhoff tune

@@boosteddave4603 oh you bought the block from hhp ok I was thinking maybe some rods and pistons but your whole block is reinforced I just seen your other videos lol might need to go get one out of a truck from junk yard

@drick2659 it all depends on miles years and specially clean title no rust from 18 to 50k plus in really good condition. Right now I have one it's a 2004 model with 8333 miles and it's worth 50k

@@boosteddave4603 I have an 03 . 118,000 Mi on it I've replaced everything and it runs like crap has a massive shutter when you slam it to the floor and it won't fall out of a tree. I'm ready to sell

@drick2659 what parts have u replaced maybe I can help you out getting running

@@boosteddave4603 Plugs tr6. Gaped at .35. New Motorcraft coils' Maf. PVC hose to turkey pan. Truck doesn't throw any codes. Idols just fine. Has smaller upper and bolor exhaust. That was on it when I bought it. It acts as if it has a vacuum like but I can't find it.

@drick2659 gap the plugs to 28 and add me on Instagram so I can respond u faster and help u out

@@alfredomontero3386 yes u have to

@mylilpony71 same set up.. till now. Its been parked most of the time. My bro doesn't drive it as much

@@boosteddave4603 Damm bro! Tell him to knock the dust off of it and bring it back out!

@mylilpony71 for most of the time it's parked bro.. because he works in Chicago a d when he is here same lol just parked

@@chuckz8053 u going forged on your build

@@carwashpowerbrake2779 thanks brother appreciate the support and will be uploading the progress 💪

@@albertogonzalez8270 thanks bro

@StreetTunedJesse it's been running really good for 6lbs. I just bought the fore fuel system and smaller pulley to start tuning it with e85 with dusterhoff and start making good power will have an update video soon

@@boosteddave4603 nice man I’m boutta add a whipple to my 6.1. Did they do a remote tune for you?

@StreetTunedJesse yes sr they did some back and forth street data logs and came out great. And then 6.1 are nice bro is it forged

@@holeshot1721 no stock ecm just tuned using a sctx4

@beans7528 thank u I appreciate the support and with the 2/4 drop u won't. Need any c notch. Anything lower u will.

@@boosteddave4603 much appreciated thank you !

Bearly get boost

@@MarinVargas-ox8qe check your boost by pass valve if it's working properly

I check the boost by pass valve and it work but still no boost .should I change it to a new one ? Or what's another thing that I need to look for ?

@2papinata118 everything was swapped to a 1997 single cab it's in my channel u can check it out

@@MarinVargas-ox8qe vacuum lines or tps or maff

@boosteddave4603 Thank will check does things outs and see if it work out for me.

@Zerfaye u can do it on the stock block.. as well just get your self a drop in forged pistons rod combination

Thanks bro appreciated and the guy that would sell them to me suddenly disappeared never herd back from him...

@@boosteddave4603too bad youre hella far bro would love to go to the carmeets you guys go too. Im in Sac in CA .

@juansblue9898888 I have fam in Cali.. bro hopefully this year I'll be up there for week

@@boosteddave4603 nice what part of cali? Would like to meet you seen like a good dude.

@@juansblue98 fresno bro like wise hopefully one day I have alot of subscribers from cali

Thanks bro appreciated

Thank u bro appreciated

Haha tuners make a big difference lol

The bulb bro

@@boosteddave4603 right one is dimmed, so should i check for fuse or just replace the bulb? Appreciate your reply though!

@@bhavitavyasharma1903 I would replace the bulb

Yes sr

@@boosteddave4603 awesome. Thanks!