Видео

Thank you

do you need to remove the pistol grip to release the trigger group? i’m having trouble with taking out mine

The skin is also great for your bone broth.

I wonder if you would've get better results if you used a piece of soda can and bend it around the corner to get a perfect round edge. Also, you could sand and then buff it easily. It's not harder than removing scraches from glossy car plastic trims 🙂 great video👍

Wrong information. Cause damage to property. Did not Fill the gap. It look Like my baby put a nail varnish in the bath.

Hey buddy, i got the same problem with my fiber glass tub, how is this holding up for you?

Mine is really pink in the center when done but I think it was because its ground meat and I used curing salts for safety.

Is your bottom vented on 2 like the top. I just started using one of these Ronco food dehydrators copy writed in 1982. That the inlaws gave me and had never been used. I just finished using it for the 2nd time today but had to finish them all in the oven.

That's what she said

What is the vent settings.

I have a crack under the handle that goes up from the corner towards the handle as well as the side of the door. This work for that? Anything i should avoid?

Im just here because am about to go buy me one.😂 for 45 dollars new...

7 years later and you helped me out big time thank you

Will hope one of the reviewer or demonstration of this on an actual vehicle in a tight spot.

You need to Dremel the bolt . Two rails ,one on each side of bolt that slides inside the mag. This will also alow you to remove the mag while bolt is closed!!

U can fix A razor blade on the saw and it will cut tire better

Will this work to keep out water from coming in between my concrete slab and the panels on my metal building because I'm struggling with water coming in my building?

Soup? Beans and ham OH YEA!

Great video

What about the bottom where there element is does the meat drip on it

I wish I could have another one like this coz I lost some items for mine

had one of these growing up, and i just bought the same one at a thrift store not too long ago.

Is this better than Silka ?

Those cars don’t have 4 wheel lock so itv only spin when one side looses traction

Nice, thanks! I just bought it since I am a renter, and my Microwave Handle came out. It is over twenty years old, and I don't want my landlord to spend so much on a New Microwave. I will try to fix it and hopefully, this Glue will work and I won't have to ask my landlord to replace it with a New Microwave. Thanks

😂😂not even v6 common dude bring a V6 it won't have no trouble 😉

I’m using Nylon. I don’t have a foil close by. I hope it works

Nice work

Thanks for the video, great guidance!

Nice job, thanks for posting this. I had my doubts that stuff could lift a garage slab but now I see it can work.

Will this tool do Bubble flare??

IS CHICKEN

Could you use a cast saw for this?

first cut out the inside ring of the tire before the start of the metal wires.

Leave it alone

Tapco is garbage i put one on to take it off and put original back on they are not built to spec to accept sks hardware its garbage! i confirmed this by trying to put it in a tapco stock and safety wouldnt work and firearm will not fire i put the firearm back together not in the stock and its functions flawlessly so the common denominator is the crap built stock that is not made to specifications to accept the firearms specifications and dimensions if anyone wants i will ship this p.o.s to them if they transfer me the shipping cost otherwise its going into the garbage

Thanks for the video! How did this hold up?

you could also cut off a strip of Electrical tape, fold it over the top and on to each end but leave about a half inch over the opening, then flatten it down with your fingers. same concept but maybe cheaper?

Another option is capping the tip with hot glue. I've been using this method for a few years and it works like a charm every time. Even after a year it's as if it was a freshly opened tube. One of the best tips I've ever picked up on RUclips.

what about a bipod?

well i typed in something else but thanks for the info.

There are much better tools on the market, and the time they save more than makes up for the cost difference. I really like the design of the Rever brake flaring tool, I bought mine on Amazon for less than a hundred bucks.

Never never never would have thought of this, very clever! Will be testing this out

Sorry - nevermind - rewatched and I heard you say half inch. Thx

What size shrink tube is that?

Can you sand this after ?

Try equal parts baking soda and graphite, mix well, place into crack (concrete) and shower the mixture with super glue; repeat; let stand several hours. Water proof

Best clamps.

The Ronco food dehydrators are absolute garbage. They have no fan to circulate air and take triple the time a real dehydrator takes, AND you have to fiddle with shuffling trays every couple of hours. Save yourself time and effort by spending a little more.

Wet the pot with white vinegar and then add a teaspoon of salt on top. (You do not submerge / dissolve the salt. Salt must stay solid but just wet with the vinegar.. like a dry paste) Then scrub with a scotch brite. Works every time. Or wet the scotch brite with vintager and then add the salt to it.