Видео

Thanks! Glad to see that the video continues to help people.

You can reset your printer using a Mac computer.

@@DavidLevi-k1 I wish someone could tell me how because all the sites I’ve tried of which are virus free will not.

@@nunayobusiness3384 Send a message to me: jangir_sultan@hotmail.com

Sorry, no idea!

Thank you so much I had the Part number but could not find a plug to match it. I'm sure mine has the wrong plug in it so your help is much appreciated.

The part number is Q50055. NGK is the brand of the spark plug. I use the (NGK) B2-LM spark plugs

Try writing to:jangir_sultan@hotmail.com

It could be the O ring - I cannot say for sure.

@@DavidLevi-k1 opened it up and found a crack in the Delonghi Brew Piston Infuser and can see it leaking, this will need replacing like yours. I am in the UK so will see if I can buy a replacement part! thanks for the video its great!!

Hahaha, Nice one! I find it a very useful tool, come in handy to access fiddly bits.

You can only clean the outer two and not the central one.

I'm referring to the outer foils. Can you open up the foil itself to access the blades? Thanks

@@thematrix7225 Cleaning is pretty simple: Use water & dish soap (UK: Fairy Liquid) and submerge the bladed part into the mix while the shaver is running. Then repeat, with clean water. In a few minutes; all blades will be cleaned! Note: You cannot dismantle the foils to access the blades.

Thanks for letting me know that it helped you! Good luck.

Thank you for your kind words! As I said before, I am not an engineer, I just had a go and when the parts arrived I thought I will film it (Including any mistakes) and it may help someone. Glad to hear that it did help. Many thanks.

Wir beliefern seit 2004 Millionen von Kunden auf der ganzen Welt mit Resets! Es ist möglich, dass jemand ein Problem hat, aber wir bieten allen Menschen, die sich an uns wenden, volle Unterstützung. Wenn Sie ein Problem haben, kontaktieren Sie uns bitte (unter Angabe der Kaufdetails) und wir werden Ihnen umfassend helfen.

Did you ever find a number for battery? I'm in the same boat can't find one listed for it anywhere

Thank you for watching the video! Glad it helped another person with their problem.

Firstly; I am no "Expert", I just made a video to include all mistakes I made, so people can follow what seems right to them! There are a lot of youtube videos explaining many problems. Just do a search on youtube. I hope this helps you to find a solution.

Hi again, i figured out the issue. Thank you though

@@filiplarsen1434 Hi, Please do share with us, how you fixed it? Many people visit this video looking for solutions. Maybe it will help others.

The 2 middle ones (Gold & Silver) MUST be put back in the right order! They both have 2 clips each. Therefore, FOUR clips/tabs, fitted side by side to slot into the bay. If any one is in the wrong order they will keep falling out. Also, the gold one is to the rear of the shaver, when holding it in your hand. I hope this help, but I fear you may have broken the clips/tabs.

@WasteInkPads thank you for that info that's really useful info. I'll try and pull it apart and see if I can fix it using your video. There is alot of Amazon reviews of others having the exact same issue so I believe braun needs to address this as it didn't happen with my original and 2nd replacement blades. Issue my seems to he with my last 2 blades which typically break within 3-8 months but braun seems to he just replacing them.

Yet to pull it apart but I think I know the fault. The gold blade has 2 silver metal hook tabs that hook onto the bottom foil blade. Over time it I think it bends or stretches getting dragged up and down your face shaving leaving enough gap to pop out. I still just need to pull it apart and bend it back towards the bottom foil blade so it has less free play but I think that's going to be the fix

Update I fixed it!! Thank you 😊 The two outer foil blades keep the two inner blades from popping out. If the inner blades (gold and silver middle blades) pop out it's because their metal hooks have become bent and loose causing them to pop out. The fix: follow the video but bend the inner blades connected to the foils out again to be more secure with the outside foil blades.

@@bign1667 Bless you! Thank you for your comments. I am sure it will help someone.

Sorry, I am no expert! I just fixed my machine and made a video of it, to include any mistakes I made, so others can avoid the mistakes and maybe assist them in fixing their machines. You seem to have an electrical problem and fused part of the circuit. Take it to a local repair person, Good luck!

Sorry, I sold this last year and have no idea on how many height settings!

The outer silver (curved foils) should lift straight out. It is possible that dried debris is holding the foils down. The inner gold and silver bars, will not lift out as they have tabs underneath. It is not necessary to remove the inner bars. You can easily clean them with a brush or even under water. If the inners bars have fallen out and will not return - it is probably due to the tabs being broken. It may also mean that you are trying to return them in an inverted position and may need to rotate them and put then in the opposite position. I hope this helps.

You are right about 1.56. I'll try but the problem may be that we are trying to get a series 7 apart! I have two dead heads so should be able to use the good foils from each of them to make ONE working one! Good video for this.

That's right, he shows how to do the reassembly WITHOUT showing how to get it dissembled! I am also trying to dissemble a metal 7 series. Maybe the 9 series just falls apart in the hand as he suggests?

Just press the link (above) and visit our website. You can download a program that will reset your printer.

@@DavidLevi-k1 Appreciate the reply.

@@DavidLevi-k1 What link? All I see is your recording playing.

I see the web page address at the end of the recording.

Pressing the web page address does not do anything except make a choice to rewind the recording. Will type in manually.

Sorry, I won't be able to help you. I had never seen the inside of one of these before! So I opened it (before making the video) and realised the generator was cracked. I ordered it from ebay. Then I thought I would make a video while replacing it. I was sure I would make lots of mistakes, but others can avoid my mistakes and probably manage to fix their machine. After a quick search on youtube I found this vwebsite: (Maybe it will help you) www.coffeeforums.co.uk/threads/problem-with-delonghi-magnificas.25619/

@@DavidLevi-k1 you did an amazing job. This video helped me fix the boiking water and frothing part of the machine. Thank you kindly for this.

@@samuelconneely3010 Thank you for your kind words!

Hi Richard, Firstly; I am no "Expert", I just made a video to include all mistakes I made, so people can follow what seems right to them! There are a lot of youtube videos explaining the removal of the Infuser. Just do a search for "magnifica s clean infuser". I hope this helps you to find a solution.

First stop the machine ..

Try eBay!

Hi Vlad, did you find a solution? I have the same problem

@@paolosacchetti4688 Hi, Paolo. Yes, I did. I cleaned everything where this water comes. Watch this video ruclips.net/video/MevXIJX7SLA/видео.html