Видео

As an owner of a 2 post lift I would much rather have a 4 post. Setup on a 2 post takes some time not to mention 4 post is safer

My SS-11000-WD has been flawless. The rolling air bridge jack lifts my 2500 RAM Cummins diesel with ease. The air bag jack may be my next addition.

This is the best video on here!!!! Thank you guy’s!!!

I just assembled/installed my new Advantage SS-11000-WD lift. It works flawlessly and went together great thanks to your videos. I managed to assemble it myself with the exception of standing up the end assemblies(posts with cross arms) and installing the runways. I had to have my brothers help with those. We are both impressed with the quality of the welds and the fit and finish of the hardware was very good as well. I look forward to many years of service from the lift. Also, is there a way I can get and install the automatic wheel stops on my lift? They were not included with mine. That is a safety feature I would really like to have. Thanks

If I could not buy a used 4-post shop lift for $1000 I would buy an advantage lift, their design is king.

If you're buying a lift to get away from crawling up and down off the floor then get a 4-post lift. It's really that simple.

I finally have to change the seals on my 1994 vintage BYB lift, so I really appreciate your video. Unfortunately, the cinematography didn't always have the subject matter in frame, so it was impossible to see what you were doing, exactly, but I'll figure it out and go from there. In any event, thanks for your efforts.

Please listen to me 🤣🤣😭😭😭

It aint got no gas!!!!!

Why can't your AL-12C have an ALI Certification? I'm looking to purchase it, but it was a feature I noticed it does not have.

Wow my lift from you guys had worked perfectly so waiting on getting a banner lol

I bought a SF10 this spring and installed the towers and getting ready to complete the project. These instructions supplied are the worst instructions ever made for a given product. Much of the information needed for cables and hoses is not in the instructions or incorrect. Why was this ever allowed to be released ? I am a retired quality manger as well as a proof reader of equipment Manuel’s.. extremely disappointed with this. I spent years boosting about AL’s as this is not my first unit. No longer will I recommend your products, my other Lifts all have finish blistering off. My lifts are solely used for storage. Never scratched or dirty. I was told they are powerder coated as well. It’s more like a cheap rattle can finish. I tired buying another 4 post last year at back to the 50’s and stood next to sales reps twice on Saturday and got totally ignored. Rep was literally BS with a none buyer. I intern called Troy in PA in Feb and ordered a SF10. Currently 8-23-24 finalizing installation. Very disappointed. BTW your manuals leave your company wide open for successful law suites for buyers. Jim Hughes.

Any brand recommendations for the paste wax?

How long does it take for delivery (typically)

Thank you for this video. Just what I needed to know !

I love my lift. This company has excellent service the best.😊

Looked good till I seen 2 release cables. No thanks.

Do you use blue locktite on any fasteners?

Mind blowing!

The instructions for my lift doesn’t go into any kind of detail what so ever. Like the overhead bar, the overhead safety switch, etc. no details at all. It just says mount it to the bar. Well how do you wire it? How do you even mount the bar?? He says in the video it shows detailed instructions.

I've had my Advantage SS-11000-WD in my home shop for over 6 months now and absolutely love it! I am a retired auto technician, and have used every type of lift known to exist over the years, and I can say with total confidence that this is a very well made piece of equipment. I looked at everything on the market before deciding on this make & model, and IMHO you cannot buy a better lift...

beefy jack i like it

My ceiling is 10'2" and want a 11K 4-post for the 240v/20 amp option. Any issues with it other than my low ceiling?

I'm putting up this lift now and the instructions are still metric. Also at 45 minutes he tells you to wire the overhead switch to the outside posts in the switch, then at 1hour 55 minutes he tells you to wire them to the two center posts. Your 4 post video was great, I knocked it out so easily... the AL-SC10 video isn't bad but so many details missed or edited out, the AL-SF10 video downright sucks.... no talking to let you know what's going on and why, just crappy music for 20 minutes

I purchased the Advantage 11000WD last year and couldn't be happier. It can lift and service every vehicle I own, from a Polaris Ranger UTV, all the way up to a big Ram 3500 Crewcab long bed dually diesel pickup! I love it!!

Your website says the 12k models are 2 stage arms, this lift has 3 stage arms. Is this a 10k lift, or does the 12k come with 3 stage arms now?

Just had one delivered by advantage lift and assembled ,I’m just so happy in this day & of scams to be able testify ,that I’m impressed in all aspects way beyond my expectations ! So glad l carefully watched videos on comparisons and overall quality of overall design ,materials craftsmanship and precise metalworking strength . This lift is bedrock solid (no wobbles) and l feel completely safe under it with my 1957 belair 2door hardtop my first car purchased in march of 1968 pushing high up near the 12’ barn ceiling !

I am going to build a house and plan on adding a few lifts. How tall should I make the ceilings, and how thick should my concrete floor be? I plan on having the lifts right next to each other. Thanks.

At 4:43 Wayne says "Those pulleys, are they ball bearing? Stacey: "Yes, yes, especially in this application. Some of our lifts have bushings" But Advantage has a video explaining that they use bushings because they think bushings are more durable in this type of use (low speed, high pressure) than ball bearings, and they say not to believe other manufacturers that say ball bearings are better!

the video was very helpful, but had mistakes a that caused backtracking and was frustrating. The manual provided is inadequate and misrepresentative of the materials included in the lift. A more accurate video, a packing list and a better manual is needed. To be clear, the packing list is essential, because I was unaware of missing parts until the time I had set aside for install.

as my 15 years sales working experiences, if your garage is big enough, 4 post lift is definitely a better choice.

wow those are tall

How do you tighten the double nut on the cable that goes down into the carriage? Can’t get a wrench in there.

Do you shim the second column also? Didn’t see anything in the video. One looks to need 1/16 shim on 2 bolts in second column.

What are the differences between this and the similar-looking Advantage Lifts RJA?

Got my lift and this jack about 2 weeks ago. Both are fantastic. I use Milton high flow V style connections for all my air tools and that makes a nice difference. This raised my hellcat durango in a snap.

Was there yesterday ;o)

I've got one of these on my lift, it is a life saver. Totally worth it. Mine is the hand pump style, but still awesome.

I want it in red and black. 🏁🏆

Wtf. Get a new marketing team. Info graphics are shit - matches the soundtrack.

Ready for a land rover 😂

Thats a really expensive shelf.😅

Where

And now when you need to use the lift, you need to move all that shit again tbh its not worth it

Whats so special about some overpriced vehicle ramps?

Are you getting four of these or using one at a time to get it on jack stands?

Where in FL?? I'll be buying soon...

🤣🤣🤣🤣🤣

That's a good ad I do declare 🤠

Wish I could get a banner I see in some of these videos for what the lift cost, a banner should be included give some swaq