- Видео 69
- Просмотров 58 585
Joe A
Добавлен 26 мар 2019
Cz457 ammo testing lilja 23” barrel #eley #cci #norma #Lapua #timney #mdt xrswith a Garmin xero
Did some testing on a few lots I had on hand cci sv eley match Norma match22 and some center x I had on hand. Just for some different looks normally I shoot Eley match for the consistency out of this rifle with a 23” lilja barrel. Let me know what you think.
Thanks
Thanks
Просмотров: 45
Видео
Accu-Tac Bipod BR-4 G2 first thoughts #nrl22#prs22#mars22#cz457
Просмотров 6521 час назад
I won a cert for accu tac on the monthly nrl22 live show. I currently have been running an atlas on my rig so figured hey why not right. First thoughts is this is super solid has less wiggle than the atlas. It will take a little getting use to deploying the legs but so far I’m happy with it.
Cz457 lilja 23” barrel eley match @Dayattherange Captain America Challange
Просмотров 303Месяц назад
Captain America challenge Sorry didn’t have a color printer to use. Not to bad I should have taken more time but ya know. Cz 457 with a lilja 23” barrel in an mdt Xrs chassis Arkens ep5 Looks like I scored an 80 ….
Silencer co sparrow 22 on a Taurus TX22 comp first shots down range. #silencerco#sparrow22#tx22
Просмотров 443Месяц назад
Silencer shop sparrow 22 can on a Taurus tx22 comp with sig red dot. First shots down range what a blast. #silencershop #Taurus #Tx22 comp #sig red dot
NRL22 Nationals recap
Просмотров 722 месяца назад
Just put a short video and pics from shooting the nationals. It was a blast side stages and a fun course of fire. Hope ya like it. #arken #CZ#area419#NRL22
Cz457 Lilja 23” barrel first shots
Просмотров 2,2 тыс.2 месяца назад
Just put this together for an nrl22 open rifle almost fined still need to swap over triggers from my base class gun it’s a timney straight blades trigger. Set up the lilja barrel with a .043 head space as best I could do with what I had. This really seems to like the sk long range match. Let me know what ya think thanks. Like and subscribe there’s more to come for this build.
Tripod assistant first rendition #nrl22#prs
Просмотров 113 месяца назад
So I put this tripod assistant together as I’ll call it. To use while getting distance and dope. Folds easily and stows great. What are your thoughts does it look like something that would be useful? Leave a comment or suggestion I’d appreciate it.
New Begara HMR 6.5 creedmoor starting to build
Просмотров 473 месяца назад
Picked up a new begara 6.5 creedmoor for a stupid cheap price 750 out the door when xxxx got outta guns and ammo. Looking to venture into PRS Centerfire thought this may be a good start. It’s not top end but I can build from here. Let me know what you think it’s still unfired I do have to mount my Arkens sh4 on it yet. Results will be in the next video when I test some ammo after break in.
Cz457 MTR XRS Lot testing with Garmin xero
Просмотров 1094 месяца назад
Cz457 MTR XRS Lot testing with Garmin xero
Cz 457 Pro Varmint Timney Trigger Upgrade
Просмотров 4725 месяцев назад
Cz 457 Pro Varmint Timney Trigger Upgrade
Cz 457 Pro Varmint Ammo Testing Norma, Eley, SK, RWS
Просмотров 2176 месяцев назад
Cz 457 Pro Varmint Ammo Testing Norma, Eley, SK, RWS
Cz 457 testing mag well adapter and thumb rest
Просмотров 442Год назад
Cz 457 testing mag well adapter and thumb rest
Cz 457 Pro Varmint Area419 Arca rail and Atlas Bipod
Просмотров 2,3 тыс.Год назад
Cz 457 Pro Varmint Area419 Arca rail and Atlas Bipod
Cz 457 Pro Varmint unboxing also add ons Area419 base & Arkens Scope
Просмотров 2,8 тыс.2 года назад
Cz 457 Pro Varmint unboxing also add ons Area419 base & Arkens Scope
10/22 Franklin Armory Binary Trigger
Просмотров 2,3 тыс.4 года назад
10/22 Franklin Armory Binary Trigger
Great results
Good times!
Indeed!
Id like to get one of those bipods. Pretty expensive but i bet they are worth it
I lucked out they picked my name randomly on the nrl22 monthly COF show. 300$ off cert. I had it out today and it is very nice little hard to get use to it compared to the atlas. But is a solid unit.
@@joea4998 im gonna do some more testing tomorrow morning. And i checked the balance on that new chassis. It balances right around where the mag release is. I think a longer barrel would even it out
Nice, same one i have works really good
I used it this afternoon for practice it is a really nice unit very solid.
@@joea4998 same I ran my savage and cheap bipod for a month waiting on my cz build and when I went back to it with the accutac way more solid very happy with it
Nice!
Thanks my guy did a great job with this still needs a few tweaks but it fixed a problem for me.
@joea4998 nice to have someone handy. There ain't anybody anywhere near me that does anything!😅
I shot some SK standard plus suppressed today. I got pack of cci quiet but haven’t got to try it yet
80 is respectable, my best is a 76 with a Glenfield mod 60. I've got just enough ammo and one other rifle to try to get in the 80's!
I miss my model 60 ..
@joea4998 I have a hard time believing how well it shoot! Especially considering the shape it was in upon receiving it!
Awesome setup. Ive been wanting to get into the competition side of things. Would you recommend that barrel for competition use? Also what ammo have you had the best luck with
Honestly I get the same barrel in a 1” size and maybe go 24” long it is a great shooter but I still can use some extra weight up front to get this rig balanced. My current ammo is eley match I did my own lot testing and found a lot available so I grabbed a case. It was a big investment but I know the ammo is a solid choice and very consistent. But if you have not done any match’s yet I’d jump in with what ever you got and give it a whirl honestly. I started off with a cz pro varmint with a 16” barrel that got me to nationals my second year. Match’s are an extremely fun and I have met a ton of people competing.
@@joea4998 I appreciate all the feedback. I have the regular 16” varmint model. And i was just using some CCI target ammo. Had some decent groups but the ammo seemed pretty inconsistent. I will pick up some different ammo and see if i get any better results. I have a 4-16 scope right now but I may end up getting something with more magnification so i can get as precise as possible.
@@2ANinja give the Norma match a try and the tac 22 those bothe did awesome in my pro varmint. If you ever look for an mtr barrel let me know I have the one I started with on my open build that I’ll be selling.
@@joea4998 sounds good man! Thank you
Good groups. I just got a 16” cz 457 varmint. It was supposed to be the 20” version but there was a mix up on the website description. Just shot some 5 shot groups today. I will have a video coming out wednesday on it
Great score 80 is real good above that is excellent
Get you a single feed mag blank they are cheap and work good I use one so I don't have a long pause in mag loading
I’ll have to look into getting one of those. Thanks
Looks good. Nice work👍👍👍👍
Thanks
Nice, the action was louder
Looking good
Love mine
Joe get that thing in the Dayattherange Captain America Challenge
Let me download it I will give it a go. Thanks
My CZ 457 MTR 20" With the factory barrel shoots sub MOA out to 100 meters, Shooting SK Rifle Match. That's using a rifle vice.
I have not tried a vise that would be interesting to see how it groups without my input.
Good job, wish we had interest and matches here
Heck yeah, it looks like a good time. Bad weather definitely makes it tough
Was a great time for sure. Can’t control the weather although I would have loved to shut the wind off.. lol
How do you like the 457 varmint? Worth the upgrade from a savage?
I really like my pro varmint after I got the cheek weld sorted. This thing will hammer with the right ammo. And it’s very easy to upgrade barrels and bed it. It got me to the nrl nations in my second year of base class. I recommend it to anyone. Hope that helps.
What distance are you shooting at this range? 25, 50, 75, or 100 yards? By the way, I have (3)CZ-457 rifles, one MTR, one w/ Lilja Barrel, w/ MDT Oryx Chassis and one Royal. Both the MTR and Lilja both shoot in the .3's with SK Rifle Match 22 Ammo.
I was shooting 50 yards to figure out what ammo it likes. I had an mtr barrel on first that one shot great but I wanted the longer barrel so I jumped and picked up the lilja. So far I’m happy with it still working out ammo shoots sk long range great and Eley match as well. Norma match does pretty good also.
What are the torqe specs for the action ???
I torque my action screws to about 36 inch pounds that seems to work well for me.
Thanks for the response I’m a little hesitant to break it down since it hasn’t even been fired yet , but the sling studs just spin and won’t come out.
@@johnloza9279 no worries just unscrews the two action screws the sling stud should have a small nut on the back to tighten up or remove. It’s pretty easy to take apart and clean. You also may have luck testing action screws torque settings. If you don’t have pillars I’d start at like 20 inch pounds then go up small amounts from there.
Hey brother. Send the barrel back.. its picky. Not worth your time and ammo
Wow talk about great customer service lol.. you go brother!
Nice 👍
Thank you it’s coming together slowly.
Nice, looks like a little more experimenting with ammo should do it. Try more SK flavors. Hows it balance in the chassis?
I’m experimenting with balance it seems like it could use a little more weight but it’s not bad for now. I’ll be on the hunt for some more sk and see what it likes.
How's the trigger working for you? Just ordered one for my cz build.
Trigger works great still doing fine adjustments but I would def do this again. Very crisp and breaks like glass.
i would assume this makes the CZ open class for NRL22?
nvm im looking at the 24-25 season rules where the thumbshelf nor the trigger will be allowed :/
Yes I’m in open class now.
Welcome to open class! Looks awesome
Well let’s see how this goes I do need to get it balanced yet that is going to be interesting.
@@joea4998 staying with stock barrel or upgrading?
@@AlexandStuff I have been looking for a barrel so I can totally see that happening. I still have to swap my tigger out of my base class set up. But as it looks now I should qualify for a spot at nationals in June. So I’ll run it as is for now. How do you like yours so far? I’m tossing between ordering a lilja or Modacam barrel.
@@joea4998 that's awesome if you go to nationals, congratulations! I love my new setup. It's everything I could have hoped for. I just have to work on the shooter behind it lol. I think you might have to go with a lilja because the modacam won't fit in that chassis. It only fits the MDT acc or mpa because of the diameter.
@@AlexandStuff looks like I can fit up to a 1.25” barrel in it from mdts web site but I’d be ok with smaller if I can get the balance right.
My CZ 457 MTR 20" shoots sub MOA out to 100 meters using SK Rifle Match. If at 50 meters there is more than one hole it's usually my fault.
Nice, about time you added it. Get some practice in with it before Sunday!
I as going to go out after work today but the wind is wicked up here. I’ll be out before Sunday for sure..
That’s the best trigger for the cz, also let me know how the Norma red box shoots for ya in the cz. I haven’t used that yet but the tac-22 in the black box is awesome. Thanks
The tac in the black box was great I found a great lot of it but now I’m out. The red tac 22 is ok not as good but there red match 22 is a touch better than the black box was it’s more consistent.
I get that I have looked at DP also thought about the voodoo and rimx but I really like the Cz action and with zero mag issues compared to what I have seen on the 700 platforms. Good luck with what you pick.
How do you like that Atlas BT 65? I’m shopping that or the BT 46 which has cant and pan. Not sure if I need pan for NRL or PSR.
I am very happy with It I use it mainly for nrl match’s. The pan feature may come in handy but for me I really don’t think I’d use it all that much.
@@joea4998 Thanks, that helps.
Nice looking setup! What CZ rifle did you drop into that MDT XRS chassis?
Sorry...I see in the title it's an MTR.
Picked up a base 457 and added the mtr barrel.
OK...I'm thinking about getting the Varmint model and putting it in this chassis and possibly swapping out he barrel at some point. The route you took is a great idea though. Since the actions are all the same on all 457s, it makes since to buy a base model and put on a chassis and different barrel. @@joea4998
If I were to do it again I think I would look at a custom like a madacam or something in the 1.0-1.20 heavy for balance. The mtr barrel is nice but not much better than my regular heavy barrel 16.5” on my pro varmint. A lilja or ibi or the new eabco barrel would work as well and be over 20”
One option for the 457 I've been considering is to get a barreled action from Desert Precision Gunworks (approx $1800) and put it in a XRS chassis, but that is getting close to Vudoo money.
What size are those rings .Sml,Med,Lrg?
They are there low rings.
@@joea4998 Thanks Man Happy Holidays.
What size arca rail is that?
I got the 12” rail on mine.
Thanks, does the BT65 allow installing barricade stop without installing a spigot extension. Confused their site says no. This is same as my gun so asking.
Yes if I understand you correct the Nara case stop on the bi pod is sandwiched between the bipod and the lock.
Scary idiot 😂
What goes around comes around sm1 may blow ur Ed off by accident
It is plus p rated so go at it.
When you show atf they change rules
Sk👍👍
Thanks!!!
New subscriber Great job
Thank you!
Mine absolutely loves the Norma, more so than the eley match. Yup I said it. Tac22 out performs the eley at least in my 457
I’ll agree with that my two Cz now do great with tac 22 black box. Red box does ok but the older black box stuff just smokes it.
if you are concerned about the gap from the arca rail to the barricade stop as well as the rail not extending out more then get thte Sawtooth Rifles XRS arca rail. it fits perfectly on mine and it extends 1.5" past the forend so I can extend the bipod out some more. I love mine and glad I went with it rather than the MDT model
Thanks for the input I’m going to run this one for a few days to see how I like it. I’ll keep that one in mind. Thanks
Looks like it’s all coming along nicely 👍👍👍
Thank you
Looks great. What barrel length is that cz?
It’s a 20” Mtr match barrel.
@@joea4998 mine has the shorter 16.5” not sure that would fit mine
@@22lr_plinking I’d think it would be close but would work I’d have to measure mine. Balance would be off I’d say mine is still butt heavy in the back I may be ordering a weight kit def an Arca rail.
@@joea4998 I wasn’t sure if the chassis would extend past end of barrel or not. I know it would be very close.
You make mention of “ half by twenty”. What is that? Also you said you got it delivered to your door for $460 from Buds gun shop. I have looked and can’t find any for that price. Did they have a special sale when you bought yours? Does your gun have the 24” barrel?
It’s the European model so the threading for the barrel is 1/2-20 instead of the American version 1/2-28. The barrel is a 20”. They had them on special a few months back.
I have the 856 defender 3"barrel glow front sites the drang marks are good it lets you know the lock is working sweet brother sweet 👍🏿🎯👍🏿
I find the Norma tac22 is great for me
Nothing wrong with any of those 👍👍