- Видео 61
- Просмотров 172 634
CET Group USA, Inc.
США
Добавлен 10 авг 2020
For more than 20 years CET has pursued the development and manufacture of its own brand of compatible spare parts and consumables influencing the OA industry around the world.
CET manufactured products include toners, drum units, fuser assemblies, fixing films, charge rollers, chips, feed rollers and more.
CET Group’s culture of continual improvement and constant innovation ensures ongoing value for all CET customers.
CET manufactured products include toners, drum units, fuser assemblies, fixing films, charge rollers, chips, feed rollers and more.
CET Group’s culture of continual improvement and constant innovation ensures ongoing value for all CET customers.
Konica Minolta IU 214 Color Imaging Unit Rebuild
Click on this link for a pdf version of the rebuild instructions:
drive.google.com/file/d/1ijlNrw_QyvRl3m2vw5XYiCWIZJ0ywC4y/view?usp=sharing
drive.google.com/file/d/1ijlNrw_QyvRl3m2vw5XYiCWIZJ0ywC4y/view?usp=sharing
Просмотров: 290
Видео
Canon iR ADVANCED C3320 Developer Unit replacement instructions
Просмотров 4699 месяцев назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj
Introducing Double Layer Cleaning Blades
Просмотров 1689 месяцев назад
CET Group is raising the bar in Drum Cleaning! The development of finer toner particles has led to improvements in printing resolution which means we need a more effective drum cleaning solution. the double layer design improves consistent cleaning performance and a longer life of the product.
Drum Unit Rebuild Instructions for Xerox WorkCentre 5335
Просмотров 2389 месяцев назад
To follow along with our directions you can download the PDF file from our google drive: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=drive_link For Xerox WorkCentre 5325, 5330, 5335
A tour of CET
Просмотров 8110 месяцев назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Kyocera FK 8350 Fuser Unit Rebuild
Просмотров 66810 месяцев назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Gear replacement instructions for Konica Minolta Bizhub C224/C227/C308/C458... developer unit
Просмотров 1,3 тыс.Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Lexmark MS810 series fuser unit rebuild instructions - English
Просмотров 613Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Canon iR ADVANCE DX C5850 Fuser Unit Rebuild Instructions - English
Просмотров 1,2 тыс.Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Ricoh IM350 Drum Unit Rebuild Instructions - English
Просмотров 700Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Konica Minolta C250i Drum Unit Rebuild EnglishV4 w101075
Просмотров 562Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
SHARP MX B350P, 350W, 355W, 376W, B450P, 450W, 455W, 476W CET131057 Toner Cartridge Installation
Просмотров 3,4 тыс.Год назад
How to install the CET toner CET131057 for use in Sharp MX-B350P, 350W, 355W, 376W, B450P, 450W, 455W, 476W
Xerox AltaLink C8130 drum unit rebuild English V2
Просмотров 610Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Ricoh MP305SP/305SPF fuser unit rebuild instructions - English
Просмотров 1,9 тыс.Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Sharp MX-2651, etc., fuser unit rebuild instructions
Просмотров 6 тыс.Год назад
Click on this link for a pdf version of the rebuild instructions: drive.google.com/drive/folders/1Z34QL1hQ4d_ODDYfqnJpoBLQk2vTv_dj?usp=sharing
Bizhub Press C2060, C1060 fuser unit rebuild instructions - English
Просмотров 8 тыс.Год назад
Bizhub Press C2060, C1060 fuser unit rebuild instructions - English
Konica Minolta DU 105, DU 106 drum unit rebuild instructions - English (updated)
Просмотров 2,6 тыс.2 года назад
Konica Minolta DU 105, DU 106 drum unit rebuild instructions - English (updated)
CET Manufacturing Story - Toner Manufacturing, Mr. Donghe
Просмотров 2752 года назад
CET Manufacturing Story - Toner Manufacturing, Mr. Donghe
Ricoh IM C4500, C5500, C6000 developer unit rebuild instructions - English
Просмотров 2,2 тыс.2 года назад
Ricoh IM C4500, C5500, C6000 developer unit rebuild instructions - English
Xerox Versant 80, 2100 Press drum unit rebuild instructions - English
Просмотров 1,9 тыс.2 года назад
Xerox Versant 80, 2100 Press drum unit rebuild instructions - English
CET Manufacturing Story - Div. 1 Production Dept LiuMeng
Просмотров 1762 года назад
CET Manufacturing Story - Div. 1 Production Dept LiuMeng
CET Manufacturing Story - Fusing Film workshop Hui Wenjun
Просмотров 1882 года назад
CET Manufacturing Story - Fusing Film workshop Hui Wenjun
CET Manufacturing Story - DU Workshop Ms. Luo
Просмотров 2012 года назад
CET Manufacturing Story - DU Workshop Ms. Luo
Ricoh IM C4500 drum unit rebuild instructions - English
Просмотров 1,1 тыс.2 года назад
Ricoh IM C4500 drum unit rebuild instructions - English
CET manufacturing Story - PCR Workshop
Просмотров 1512 года назад
CET manufacturing Story - PCR Workshop
HP LaserJet Pro M404 Fuser Unit Rebuild English
Просмотров 2,7 тыс.2 года назад
HP LaserJet Pro M404 Fuser Unit Rebuild English
Kyocera DK 8350 drum unit rebuild - English
Просмотров 1,2 тыс.2 года назад
Kyocera DK 8350 drum unit rebuild - English
Kyocera DK 5230/5231 drum unit rebuild instructions
Просмотров 4,9 тыс.2 года назад
Kyocera DK 5230/5231 drum unit rebuild instructions
Xerox AltaLink B8045 drum unit rebuild instructions
Просмотров 3,4 тыс.2 года назад
Xerox AltaLink B8045 drum unit rebuild instructions
Will this work for c1070?
Sir. Hope you are fine and well. My mp c2003 wasting magenta toner alot. Almost 200 grams every 1500 impressions. My prints are usely text and cad drawing with black and a little color logo. I first change the developer then Toner then complete developer unit and still nothing good happened. I reset the machine but still no luck. Have you experienced this ? Any solution. Regard. Pakistan
Thats great, keep the good work
How to buy a picker finger set?
hi, please email sales@cetgroupco.com
More videos and thanks for sharing
Hola! Al realizar el rellenado mi revelador se queda trabado, qué podría ser?
Hai sir iam naveen I using sharp ar 6020nv model my mechanic some flat for papper jaming in fuser unit how to solve the problem not come out upper side papper jaming in fuser unit...
❤❤❤ شكرا ❤❤❤
in my machine lower roller heat problem in fujer unit konica 70hc
Contact number pls
Whats the name or size of this drum? Without plastic
Good evening my friend, can I ask you for a little help on my Konica Bizhub C224e photocopier? I have a problem and I don't know what to do.
Hi, Kindly do for me rebuild instructions for Kyocera ecosys m5526cdw fuser unit. I have subscribed, commented and liked your videos.
How to buy fusing belt frim pakistan
Большое спасибо за видео, вы очень помогли!
I wish this was 720 HD quality and has a little bit explanation. Keep the great work bro!
How to deal with error E020-04a8
For which photocopier models will these cleaning blades be available? I mean Ricoh models 2011 3003 3004 IMC series? Regards, Tomasz Jemiołek from Copy-Expert Movie Studio.
How about the chip? This way the machine doesnt do reset.
This is the problem with Ricoh. Too many unessesary parts.
How can i get the kit your website won't open
Excellent professional work
Any authorised dealer in India Tamilnadu
Solve c6600 error?
Can u named lubricant used?
*Promo sm*
algun video de la Konica C6000 C7000 C70HC por favor Fusor - transferencia - mantenimiento etc. gracias
we will add to our to-do list, thank you!
excelente video, muchas gracias
Hola buen día muy buen video gracias por la explicación, tienes algún video para el desarme del fusor de la Hp M551?. Por otro lado la grasa que ocupas para las Hp 4015 RM1-4554 o RM1 4579 necesita una grasa de alta velocidad, alguna marca o link de compra en aliexpress o algún otro lugar donde adquirir la correcta ?, de antemano muchas gracias
Buenas tardes! Excelente video, buena explicación. Realice el proceso como el video pero al encender da error 50.22.00 error de fusor. Alguna indicación? Gracias
Thank you for your question. Please note error 50.22.00 means the machine does not detect the heating element is warming up. Following is the troubleshooting procedure: 1. After getting the error check if the fixing film is hot or cold. If it is hot, then the likely reason of the problem is that the thermistors inside the fuser unit are dirty or not properly seated. Reassemble the fixing film assembly making sure the thermistors are clean and properly seated. If the fixing film is cold, then proceed to step 2. 2. Check the resistance between fuser unit contacts as it is shown at 8:53 in the video (the normal resistance for 110V fuser units is lower than showed in the video). You will likely find the circuits are open. If so, you will need to find where the circuit is exactly open: o The heating element connector is not fully seated o The thermoswitch is open o The heating element is installed in wrong direction o The heating element is broken or defective Thank you for your interest!
Thanks!
Hi, do you have CET sales points in Brazil?
Yes we do! Please contact Emma@cetgroupusa.com for more information. Thank you
ممنون از این که تجربیات دان را در اختیار ما میگذارید،🙏
You are welcome!
بسیار عالی،استاد کار ماهر.👏👏👏👏
I'd like to buy this kit. Where can I buy it?
Please tell us your geographic area and we will send you the email address of your representative. Then they can help you. Thank you for your interest!
Please sir, i need your help. My Konica Minolta C554 was working well but i decided to change the OPC drum for CYAN because it has a scratch on it which affect printing. After changing the OPC drum and installing it back, the machine did stabilization by itself and i then noticed that the Developer for CYAN began to spill on the OPC drum which could damage the OPC drum. I didn't do the servicing to this level as you did in this video. I only remove the OPC drum, dust off the toner and developers inside of it and then fix the OPC drum back to the drum unit. Please sir, I am new to servicing. Is there something I didn't do right when assembling back the drum unit? Why am asking is because this is the second time it is happening and an engineer came and corrected it. So I am thinking if i did not get the assembling of the drum unit well which could be affecting the developer to spill on the OPC drum. Please help me Sir.
Hello, Very likely you made a serious mistake when disassembling the dum unit. You removed the two screws that hold the arm-spacer on the front support plate. The location of the arm-spacer is factory-adjusted to keep the proper gap between the OPC drum and the developer roller. If you remove (or even loosen) these screws and reinstall (or tighten) them, you break the adjustment. Now you may loosen these screws again, move the arm-spacer all the way toward the developer roller, then tighten the screws. This will prevent developer pulling, but you may get lighter image on the front side of printed pages or horizontal light banding at about 1-inch interval because the gap has become too big. You may try to fine-adjust the location of the arm-spacer but it is very difficult to catch. The best way to solve this is to buy a new drum unit. Good luck!
@@CETGroupUSAInch my God , that's true Sir. When I was disassembling the drum unit, I removed the two screws that held the arm-spacer because some videos I watched on RUclips did it that way and from what you said, I can understand your point very well. I never knew it is way risky to remove the OPC drum that way. Now that I know, I won't remove the drum unit that way again. Thank you sir. I will try what you have just said. Sir, that means I will need to bring out both the developer unit and drum unit in order to get a proper measurement when moving the arm spacer of the drum unit towards the developer roller ? Secondly when I was servicing the drum unit, I used a white piece of cloth to clean the edges and side of the cleaning blade. According to your video, if I am reusing the Cleaning Blade I will need to apply toner to the edge of the Cleaning Blade. If I don't do so, will it have any effect ?
@@CETGroupUSAInc wow thank you sir. It work! I mean the adjustment of the arm spacer. Truly it was a big big error from me. I tampered with all of the arm spacer in all of the drum unit. I had to call an engineer who helped me to adjust all of the three arm spacer for Cyan, Magenta and Yellow. Now, the developer doesn't spill developer to the OPC anymore. It seems balance now. Thank you sir for the idea. I knew I must have done something wrong but I didn't know the exact place that I got it all wrong. I never knew that I messed up the arm spacer for the drum units. The engineer also spot the errors I made while fixing the arm spacer. He told me the same thing that you told me, "NEVER TO LOSE THE SCREWS OF THE ARM SPACER BECAUSE THEY ARE FACTORY FITTED AND ONCE TAMPERED WITH, IT WILL TAKE A LOT TO WORK TO BALANCE IT BACK". Truly it gave us a tough time to balance it back. Thank you so much sir for the idea. "YOU ARE A GENIUS"
@@gabrielchristopher9363 That is great that you solved the problem and we were happy to help! Regarding your question about drum cleaning blade lubrication, If you don’t apply toner to the edge of the reused drum cleaning blade the cleaning blade may flip during the machine getting ready or when printing the first several pages. If that has not happened, than it should be ok.
@@CETGroupUSAInc wow thank you sir for all of you contributions and solutions. Am more than grateful sir. Now I understand how to remove the OPC drum, and the reason why toner is applied to the edges of the cleaning blade for both drum unit and image belt. I had the same experience on the image belt. I was wondering why after cleaning and installing it, the cleaning blade of the image belt flipped but I have solved it with your solutions. Once against sir, "YOUR ARE A GENIUS"
Czy robiliście test tonerów?
Yes, all toners are tested with OEM toners to ensure full compatibility and comparable performance. However, we cannot guarantee compatibility with other compatible toners since we do not know their formulas. Please let me know where you are from and I will give you the email address of your CET representative. Thank you.
hacen envio a lima peru , soy distribuidor xerox requiero cotizacion
Please contact paola@cetgroupusa.com, your CET sales representative for the requested information. Thank you
Excelente 👏👏
Thank you!
Very good 👍
Thanks
@@masengeshoflorence7027 You're welcome!
Greetings, very good video. Could you help me, I followed all the steps in the video but once the fuser was assembled, the film does not rotate. What could it be?
If you were rebuilding VersaLink B400/B405 series fuser and used the silicone oil from the oil application pad package, then try to re-apply the oil with the oil taken from the fixing film package (it looks yellowish). In some cases the yellowish oil from the fixing film package works better in VersaLink B400/B405 series fuser units. In Phaser 3610 / WorkCentre 3615 series both types of oil should work OK. Anyway, please double check the following: - proper attachment of the oil application pad cloth - proper assembling of the fixing film assembly - proper attachment of the springs that apply pressure between the upper roller and the fixing film - the surface of the fixing film and upper roller are cleaned from any oil with isopropyl alcohol All the above may cause the problem Good luck!
@@CETGroupUSAInc Regards, I cleaned everything and reapplied the oil. the fuser works fine 3 days and then it starts to wrinkle the paper. What fat do you recommend?
@@FranciscoRodriguez-vu9kf We recommend the following: 1. Check if there is any pieces of paper or other trash left in the paper path before the fuser unit, in the fuser unit and after the fuser unit. 2. It's possible the red silicone insert under the oil application pad cloth had some damage when you were rebuilding the fuser unit. If it was damaged, you may not resolve this issue as there is no replacement silicone insert available now. 3. Thoroughly clean the fuser unit metal entrance guide with acetone to remove any toner contamination. Check if the surface of the guide is smooth. 4. Thoroughly clean the fuser unit plastic exit guides with acetone to remove any toner contamination. Check if the ribs on both guides are smooth. 5. Clean the upper roller picker fingers with acetone to remove any toner contamination. Check if the picker fingers are not damaged and properly seated. 6. Clean the exit rollers and exit section guides, that are located in the machine (not in the fuser unit) with isopropyl alcohol. Good luck!
Nice, all correct👍
You have kyocera model nb 6525 //drum
I'm sorry we do not carry that drum at this time.
Привет, смотрю с Казахстана! Hello, I'm watching from Kazakhstan
I usually just pull it from the front, never had to pull the screws at the back
Yes, but If you leave the rear end plate attached to the drum unit, you may scratch the new OPC drum and damage the recovery blade when installing the new drum onto the drum axle. Thank you for your feedback!