- Видео 27
- Просмотров 342 831
The Engineering Surveyor
Шри-Ланка
Добавлен 28 апр 2020
This channel is specially made to disseminate the practical knowledge on surveying and leveling. This channel will help you solve most of your practical problems arisen during the practice in the field. This channel will give most simplest and easiest solution that will be remembered forever.
Orientation of Total Station and obtaining Details ( Topcon part- 5)
This video explains you how to orient the instrument Backsight NEZ and collecting the details
Просмотров: 2 643
Видео
Setting out point data using a Total Station ( Topcon Part - 6)
Просмотров 4,3 тыс.Год назад
This video explains you how to do the setting out of points after orientation of the Total Station.
Angle and distance measurement - (Topcon Part-4)
Просмотров 6 тыс.Год назад
This video elaborates how to do a traverse using a Topcon Total station. Procedure is same for the Sokkia total station as well. The video explains the way of measuring an angle in a traverse using double face method. Further it shows the way of recording the angle and calculating the reduce angle. Finally it explain the SHV function which let you find the distance between station and the targe...
EDM settings of Topcon Total Station (Topcon part-3)
Просмотров 7 тыс.Год назад
This video elaborates how the Electromagnetic Distance Measurement (EDM) settings are done prior to any operation of Topcon Total station. The procedure is exact similar for Sokkia brand as well. Hope you will use this video to feed EDM settings to your Total Station.
How to create a Job in a Total Station - (Topcon part -2)
Просмотров 2,1 тыс.Год назад
This video elaborates how to create a job in a Topcon Total Station
Temporary Adjustments of a Total Station - (Topcon Part 1)
Просмотров 1,1 тыс.Год назад
This video describes the procedure of centering and levelling of a Topcon Total Station. From this video you can learn the proper and the easiest way of doing the temporary adjustment mentioned below; Adjusting the height of tripod head Placing the tripod over the control point Centering using the laser plummet Adjusting the Bull's eye bubble (Pond bubble/Circular bubble) using tripod legs Adju...
Closed link Traverse (Total Station Traversing)
Просмотров 3,9 тыс.Год назад
This video elaborates how a closed link traverse is done and how the calculations are performed. I found no videos on a full calculation based on actual field data. This video teaches you each and every step of closed link traverse including followings; All the important definitions; Control Point, Traverse Station, Included angle, WCB and etc. Angular Measurements Distance measurements Angular...
Measuring a horizontal angle and a horizontal distance using Total Stations (Double Face method)
Просмотров 14 тыс.Год назад
This video elaborates, one of the essential operations of Closed linked and Closed loop traverses. It explains step by step procedure of how to measure a Horizontal angle between two pickets and how to measure a Horizontal distance between the instrument and the target prism at the forward direction. Further, it explain all the minor steps such as Check the tilt, adjusting EDM settings of the T...
Orientation of a Total Station - Backsight NEZ
Просмотров 1,9 тыс.Год назад
This video elaborates how a Total Station is oriented using coordinates of two locations. After that it enables to collect the details with respect to those two coordinates. Further this video elaborates how the detail is collected and how to target to a prism correctly. After watching this video, you can confidently pass the practical assessments and related total stations.
Orientation of a Total Station (Backsight Azimuth)
Просмотров 5 тыс.Год назад
This video elaborates how to orient the instrument using a coordinate and a direction. After orienting the instrument you will be able to obtain details of the surrounding features (Topographic Survey). Further this video elaborates all the basic steps that should be followed before orientation of instruments such as creating a job and adjusting EDM settings. Hope you'll follow all the steps an...
Setting up of a Total Station (Centering and Levelling)
Просмотров 6 тыс.Год назад
This video explains the step by step procedure of setting up of Total Station. It will give all tips required to adjust the heights of the Total Station, to keep the Total Station on the tripod head, to do the centering using laser plummet and to do the centering using bulls eye bubble, longitudinal bubble and digital bubble. By this video, you can practice the procedure and face your practical...
Setting up of a Theodolite (Centering, Levelling and Focusing)
Просмотров 37 тыс.Год назад
This video explains the step by step procedure of doing the centering, levelling and focusing of a theodolite. This video contains the precautions you must take to avoid the mistakes happening during this entire process. Further it explains finer tips of doing it (Tips for fixing the instrument over tripod head, tips for adjusting height of the instrument, tips for levelling the bulls-eye bubbl...
CIVIL 3D-Part 4 How to put an alignment on a contour map and obtaining coordinates for setting out
Просмотров 1,2 тыс.2 года назад
This video elaborates how to create horizontal alignment over a surface and how to draw a surface profile. Further it explains the way of obtaining coordinates data for setting out work of the proposed horizontal alignment as well as for a proposed building. Therefore, this video will educate you how the initial surveying works as well as designing works of roads and building constructions are ...
Producing A Topographic Map Using CIVIL3D Software
Просмотров 4,8 тыс.2 года назад
This video elaborates how the combination of contour map and detailed survey can be produced as a Topographic map. This video will give you all the important steps of producing a topo map including sheet size selection, scaling and importing to a pdf. These steps will be helpful to you do your own survey plan works and to get outside surveying jobs together with the plan works.
Creating a Surface using point data in CIVIL 3D workspace
Просмотров 1,7 тыс.2 года назад
This video is the continuation of the Video I have uploaded as CIVIL 3D - part 1. This video describes how to create a surface using imported point data. Further this video explain some very small analysis that would be helpful for engineering purposes.
Import Total Station point data to CIVIL3D Workspace
Просмотров 2,4 тыс.2 года назад
Import Total Station point data to CIVIL3D Workspace
(High Speed Levelling) - Setting up an auto level on hard ground within 30 seconds
Просмотров 1,7 тыс.2 года назад
(High Speed Levelling) - Setting up an auto level on hard ground within 30 seconds
Parts of a digital theodolite and way of targeting an object
Просмотров 13 тыс.4 года назад
Parts of a digital theodolite and way of targeting an object
Measuring horizontal and vertical angles (Theodolite Surveying Part-I)
Просмотров 108 тыс.4 года назад
Measuring horizontal and vertical angles (Theodolite Surveying Part-I)
Combined Error of Earth Curvature and Refraction
Просмотров 20 тыс.4 года назад
Combined Error of Earth Curvature and Refraction
Very good
Whenever I try to update stm file in civil 3d, all manholes delete automatically and size pipe doesn’t change and it doesn’t update.
Wow I like kolida I use it is suitable for observation
Good job sir
That music in the background is so annoying and disruptive.
As a video gamer looking for who coined the video game term, I did not get the answer I needed 💀
Super sir i am a land surveyor very nice style for teaching thanks a lots
Super style for teaching thanks a lots sir
So well explained. Thank you sir
Ap na music ko delete kejiyega, bahut hi zyada annoying hai
Excellent and Very through this video.i really appreciated it. Also who is beginner to learn what to learn and how to set the theodolite serveying level machine.
Well explained
We can prove it's not a ball easily because east west flights around the world flight times, distances, & airspeed. With knowing that information for many decades they've had a calculated circumference distance of earth of which they have taught in school of between 24500 to 29000 miles at the equator. That is how they derived their curvature math at 8 in. per mile square. But what easily Debunks this nonsense is, using their math, a 6 ft person will not disappear in 3 miles. Willis tower in Chicago is viewable across Lake Michigan at 60 miles which is 1450 ft tall, but at 60 miles there should be 2400 ft of curvature drop. 😂 You can see the short buildings even!! To embarrass the hell out of masonic nasa & the establishment, people have viewed with high optics mountains across a few hundred miles of land & water both ! - that should be miles beyond curvature according to their math. LIARS 😂
Thank you❤
Too much noise
Excellent job you did 👍
Your theodolite is of toquality but your video is totally full of noise. Can you remove that noise and reduce the background sound.
Thank you for posting this excellent video. Before watching this video, I was confused about whether or not I should adjust the starting and ending control stations of my closed link traverse for a project involving a maintenance map for a road. You have cleared up any confusion that I may have had. Your control points 9002, 9003, 9007, and 9008 are GNSS points in my traverse. I have 4 traverse stations between them. Someone suggested that I reduce my grid distances to ground distances and recalculate my points before I perform a Compass Rule adjustment. Do you agree with their suggestion? My change in elevation from beginning to end is +/- 2.37' over a traverse length of +/- 3338'.
sound quality was too poor for me to understand well. To bad. otherwise good, I'm sure.
Excellent and very thorough video. Especially for someone who’s just beginning to learn how to set up a station.
❤
MOST I.M.P CHANNEL VIDEOS IS BEST
I always enjoy your teaching,but for this,the background music is distracting me,so I don't think it's necessary.thanks
The mental gymnastics Globers have to do 🤣
So trigonometry is now mental gymnastics?
Ymean having common fuckin sense?
What is up with camera
Your theory totally wrong...atfirst two leg should be firmly fixed then 3rd leg to cw acw or in out move....2 nd one bubble tube should be parallel to two foot screw and 90 degree to 3rd one
thanks a lot
Simple but great 🥰
Clear cut your explanation...
Thnsk fine r fine s searching for it
Hi your content is good but video quality is very bad, try to upgrade if possible. Thanks
❤
Thank you sir❤
Very Good
Procedure bi sath likho
Great video mate! 🎉
Sir, requesting you to please eliminate this background music in your future videos please !!
Plz off the autofocus of the camera next time. It will give the better clarity
I gain some thing thanks verry much
I need you help pleas i have kilida 552 I want to Change the Idioma Mandarim four English ou português
❤❤❤
This video is boring!!
How to measure of a big area by this and trigonometry.
Brother how do change language topcon total station ES 105
what's the difference between double center (double face?) and double angle
Thank you
Your video is very useful for my survey tutorial Thank u sir from 🇲🇲
hello tomorrow i have exams and your video is very helpfull,greetings from Greece
This was surprisingly helpful I'm not going to lie😂😂👏🏾
Sir please translate the sinhala