Видео

I’ve seen video where they powder coated it is much better

Does the remote control come separately?

I bought mine about at least 20 25 years ago still got it.😊

Re: the engine restoration - There's quite a bit more to getting this horizontal engine running smoothly again than what's in the video. As a retired 3rd Class Stationary Engineer, I speak of dealing with what this restored engine presents . First, is what the viewer sees actually what the restorer is confronted with? Specifically , does this engine actually come with an inside admission piston valve mechanism? Or, as is more common with these toys , is this vale mechanism simply a "block " valve with outside admission made to look like a piston valve mechanism? This would be a very important determination to make before setting the valve on this engine. Secondly, a determination would have to be made as to whether the engine 's valve motion should be timed for "running over" or "running under". It appears in the video it was decided to time the valve gear for running "over" , or twelve o'clock on the flywheel rolling towards the engine from the flywheel side. Setting the valve on a horizontal engine is usually easier than on a vertical engine in that you don't have to compensate for the weight of the piston , piston rod at the crank end of the stroke , so it would be equal lap and lead at both ends here. The problem with these small toys is the math to physical, measurable dimensions when having to represent 1/2 of a millimeter of distance in dimension and produce that measurement accurately at the valve linkage for proper lap and lead at both the head and crank ends of the piston stroke.

It's come with esc, motor & servo or have to buy separately?

how do i clean the insinde of the small pipes because there is dirt or something in mine

Nicely done!

Just found your channel and Subscribed. Very nice work

Nice job but still needs adjustment it is still knocking

This is awesome! I'm starting to restore a old steam engine just like this and this video is a BIG help.

i like thanks

Do you have any issues getting steam up using coal? I have the same model and it seems difficult getting this to run on coal, no issues with hardwood though maybe i need a stronger stack fan...

Can the end caps for a small boiler be soft soldered? and very nice job !

Mastercraft tools ! you are Canadien !!! 😉

belle restauration bravo 👍

belle restauration bravo 👍

But does it work?

Just came across this video. Like you, I too bought a used Jensen 75 off e-Bay at a low price. It was in similar condition. Sadly, I did not take images before restoration, but I did take them after completion. The good news is that Jensen is still in business, and you can order replacement hardware fairly reasonably. I got a new sight glass, fuel tray, authentic rivets, and gaskets as well as some valve oil. It was also missing the stack, which you can see I also obtained. Best of all, they have a flat plate tool for getting the sight glass ring out! I used Sterno fuel for heating mine, but I would be interested in what that was that you were using. Was that a small butane tank? Timing of the engine is fairly critical to its operation. The optimal setting is when both forward and backward are identical speeds. However, you can favor one direction over the other and that engine will scream! Now to find accessories to hook up to it. Here's a link to images of mine restored: www.dropbox.com/scl/fo/wfmpxifu15z9w19xqtmk4/h?rlkey=xjsewsu43bkzhwklawdzkt0np&dl=0

Nice restored old machine to new machine ❤

Nice replacement parts ❤ and new model

😮

Really nice job. What color is the blue paint for the base? It's fairly close to original. I actually like the new color better.

Faz sem acelerar o vídeo

Wow that’s cool

My grandfather had a Holt tractor with one of these on it, I believe it was a WWII airbase unit

That’s really cool. How do you know if the boils is ok and will hold the pressure? I have a 45 year old engine from when I was a kid , was thinking of trying to run it , although all the pipes are soldered .

Make it two Wheeler

Mesin uapnya kerey

Its a credit to you.

What esc servo and receiver did you use

goil ...

You are an artist.

I just purchased one on eBay for my son who loves steam powered locomotives, it is said to only have seen steam a few times and is in excellent condition, I will inspect it and oil it up based on your video, thanks for posting it. What is the fuel used to run these engines?

WAY TO STIFF

Il était superbe en rouge c'est dommage a mon avis de l'avoir modifié

Great restoration. Always remember to put the kettle on! Pour boiling water into the boiler, that way it only takes a few seconds for the heat to start the operation!

Screw this mudic

It was never a full resto!! Doesn’t have to be. Jensen sells all black fireboxes!! I like your mini rivet gun. Can I have it? Lol How did you set up the fuel system? That looked pretty trick!!

great work when filling use hot water quicker head of steam

sure liked the way you repaired the grill.nice job

Very nice job! My father had given my brother and I a steam engine that is similar, if not exact. It is now given to nephew. Nice to see a talented and caring individual do such a beautiful work of restoration.

A magnificent restoration. Better than new

gloves,im out

I had to view it on 1/25 speed. Why does he not respond to viewers after what appears to be a road map on how to restore one of these???? No final test ???? I don't get why a person would go to this level and then abandon the viewers......?

Nedá sa pozerať,každú chvíľu vyskakujú okná

A beautiful restoration. I had one of these when I was a kid in the 1950s. Mine was probably made in the 1920s or 1930s. Watching yours, I can still smell it to this day.

Hi ! I've the same one since 1976 !! Nice restoration thanks.. Nowadays, we never have so solid toys.. 🤜🤛👍

i am being serious how much for it

can i please have it

Thats not the century for slideshows......