- Видео 16
- Просмотров 29 056
MotoRider510
Добавлен 13 апр 2017
Installing a Flasher Relay on my 2019 Yamaha R3
Welcome to my channel 🙂
Today I installed a flasher relay on the Yamaha R3. This is needed anytime you install any aftermarket turn signals, because it causes the lights to hyper flash (speeds up the blinking) and the flasher relay brings it back to the oem speed.
Hope you enjoy!
Today I installed a flasher relay on the Yamaha R3. This is needed anytime you install any aftermarket turn signals, because it causes the lights to hyper flash (speeds up the blinking) and the flasher relay brings it back to the oem speed.
Hope you enjoy!
Просмотров: 1 495
Видео
Yamaha R3 Walk-Around / M4 Street Slayer Exhaust Review
Просмотров 13 тыс.3 года назад
Review on my 2019 Yamaha R3 with the M4 Street Slayer Slip On 😁
K&N Air Filter Installation for Ninja 300
Просмотров 1,1 тыс.3 года назад
Welcome to my page :) Simple installation for an air filter on a Kawasaki Ninja
2019 Yamaha R3 K&N Air Filter Installation
Просмотров 7 тыс.3 года назад
Welcome to my page :) 2015-18 models do not need to follow the same process!
Yamaha R3 2019/2020: Swing Arm Sliders
Просмотров 4233 года назад
Welcome to my page! :) Today I installed a set of swing arm sliders on the 2019 and 2020 Yamaha r3.
Custom Windshield for Kawasaki Ninja
Просмотров 1093 года назад
Welcome to my channel :) Aftermarket chrome windshield for my ninja!! Just a small modification on my beautiful bike 🤩
Random Person Admires my Ninja
Просмотров 643 года назад
Welcome to my channel :) Random guy admiring my bike… we received many compliments on our two wheeled rides unfortunately off camera
LED Reflective Rim Tape on my Kawasaki Ninja
Просмотров 2043 года назад
Hello! Welcome to my channel :) Today I removed the previous LED rim tape (cyan) and applied a hot pink one on my Ninja. It’s a small mod but it makes a big difference on the look of your bike, I have received plenty of compliments on it! The procedure is very simple, all you need is a blow dryer, alcohol wipes, and some new rim tape. 1. Remove any tape (if any) with the blow dryer 2. Wipe off ...
Ride
Просмотров 863 года назад
Hello! Welcome to my channel :) Today we encountered a situation that you wouldn’t normally bump into while riding. A man was in the middle of the street and we decided to stop and check on him to make sure he was not in any way injured. Please give it a like, comment and subscribe!
125cc Night Ride (Honda Grom 2020)
Просмотров 1933 года назад
Recorded on GoPro Hero 8 Subscribe for more motovlogs :)
What phone mount did you get to actually fit? I’ve been trying to get one for my 2024 r3, just can’t find one that fits
Get the quad lock brake/reservoir mount
Did you have to get a tune?
Does it affect emissions test?
Super Nice!!
I bought the same Signals you have in the back. Is there a video where I can see how you did the wiring thanks! 🤙🏻
is it a full exhaust system, or is it a slip on with the cat still on?
You cut the cat off then connect the exhaust to the headers. Pretty much a full system but with the oem headers.
Just purchased this exhaust yesterday cant wait great vid 🙌🏼
Is that full exhaust or just the slip on m4 slayer ??
It's technically both. It cuts off the cat and slips on, so it fundamentally works as a full exhaust.
Just what my mt03 needs! Some tunes 🚲🌛⛄
You do not have to do all that, just pull the black side cover and the 3 screws and you’re done
Nope, that's only on the 2015-2018 R3. 2019+ you HAVE TO take all of this off to get to air filter.
Absolutly not take that cover off and drill a hole in the plastic that goes over the tank so you can get the top screw out 10 minute filter change
I used a multi tool and just cut a square out of it it fck all that in this video lol
Hey does all m4 street slayer have a Db killer already in it because I wanna buy the m5 street slayer slip on , so I wanna know if it has or not so that i can tell my mechanic to remove it if it does ?
its easy to remove you just need an allen wrench. takes 30 seconds
how does the bike feel after putting on k&n air filter. i have an R3 with Akrapovic full system exhaust and m planning to change the stock air filter with K&n . please lemme know the change that u felt. and it is safe for the engine as in the yamaha r3 forum they say that it allows the dust to enter the engine and causes engine seizure. 🙏🏼
did you get a power commander or any tune at all?
Do you have to cut your exhaust?
Yes
Is there any mileage drop in the bike
Yamaha is insane for making it this hard to get to an air filter.
You don’t have to do all that that black side cover is all you need to pull, they went way beyond what need to do lol
@@corey7348how?
shut up
where did you get the red stripe on the rear?
From the previous owner 👍🏻
Just tried to pull the air filter out of my 2020 because in the manual it shows you just having to remove the small black cover and then the air box screws. Apparently that's on the first gen bike and the tank cover blocks the third screw on the second gen. Total pain how much harder it is on the second gen but thanks for the vid
did you have to tune the bike with the m4 exhaust and k&n air filter?
have you upgraded the intake at all? if so to what?
Bro how is performing right now?
The performance is great! Just as good as new 🙌🏻
Nice bike. Nice sound. New sub for you. Ride safe.
Thank you, I appreciate the support! 🙏🏼
Hi you probably won’t reply but did you change anything else on the exhaust to make it shoot the flame 🔥 or do you just need the slip on
Just the slip on! (I did remove the silencer)
I keep looking for visor and they list rs2 I can't find rs3 are they same where did you get them?
I ordered it through cycle gear as “HJ-09”, but the link is also in the description. Hope this helps!
Nice instructional video I appreciate it! So just replace the air filter all the fairings including the gas tank cover have to come off? I have a 2021 model
Yes! So this is only for the newer models and I’m assuming the 2021 is the same way. Hope this helps!
Hey big thanks! I'm gonna do this on my bike pretty soon.
No problem! Hope it helps
Thank youuuu for this video! We have the same bike! ☺️
awesome! Thank you for your comment and support ! 😊
Muy bonita y buena moto esa YAMAHA R 3
Si, unas de las mejores motos que e tenido, gracias por su comentario!
Great video. I am thinking of getting that same M4 slip on.. It really does make the R3 look clean
Only mod you would have to do is cut off the cat to give it that clean look 👌🏻
Very stylish helmet 👍🏻
I designed it myself 😎
Thank you for the tips, your bike looks dope!!!!👍🏻
Thanks! 😊
TST tailight would look nicer with that fender :P
I agree but it was out of my budget… this one was only $100
i also recommend some bridge S22 tyres for the R3 tyres are very important
I don’t do track, but I will look into it
@@motorider5106 S22 are road tyres, i just put them on my R3 and love them gonna throw them on my R6 when it needs new tyres
@@JamieS1992 ohh I see, I heard they were great for track so I assumed it was for track 😅 how much are they?
@@motorider5106 i live in australia so the price is very different
@@motorider5106 I got them for my R3 few months ago. When I was buying a set was cheaper than Dunlop GPR-300 that comes stock with R3. Price difference was somewhere in 10-20€ range for a set.
Where did u buy it
I ordered mine through STG 👍🏻
Does the standard air filter came in pre oiled?
To my knowledge they come pre oiled and ready to install 👍🏻
Thanks . Easier than I was trying to make it.
You’re very welcome! I’m glad that my video was helpful
Where is this?
Bay Area
Nice looking bikes!
Love your videos! Please keep them coming!
Thanks! 🥰
Seems like a lot of work.... thanks for the information 👍🏻
Glad you enjoyed, ☺️
Which phone mount do you have on it? I need to get one for my bike!
I have the “Ram” phone mount, you need a ball joint socket, ball clamp base, and a M6x50mm screw. Hope this helps!
Amazing colour
Thanks! The white on the bike is nice, I also like the dark blue model, because it comes with blue rims.
Hello! Is it okay to use it?
Of course! No problem
Just got this helmet I love it
One of my first helmets... still love it. Which color did you get?
@@motorider5106 I got the light grey with the gold visor it looks so clean your vid helped me change the visor
Enjoy the grom life🤘 All the best for 2021 for you