Видео

Please consider subscribing to see my next project!

So that was eight flat washers and four lock washers.

I had a simular problem with the plate dropping below the table surface even after adjusting the leveling screws. after just a few passes the plate would settle downward. It seems the vibration would allow the leveling screws to move. I solved the problem by removing the leveling screws and using two thin stainless washers under the plate and a small lock washer on the securing screws.....problem solved! the plate is perfectly level with the base and has not moved at all.

What did you do with red wire?

1:37, when I was little, I hated going to kindergarden, I went for a week or so, but I still remember that every night I dreamed about this place, I used to fall in a large slide to some pillows and it was literally this bro. I dreamed with this place and it's sockmade habitants every fucking night, a few years ago I was in a very bad moment and I dreamed with it again, as a teen, and it was so vivid man, like- they told me goodbye, it was my last visit

Hi, need help, can't seem to find the right knock sensors for my M50b25 single vanos?

What a downgrade! From a Fasco Charleston to a Harbor Breeze Mazon.

That old fan could have lasted another generation. I would have put it up on FB Marketplace or something instead of leaving it out on the road to get rained on

Mannnnnn a first generation Fasco Charleston. Too bad scrappers got it. Great old fan that would have brought you 2-3x the price of what you paid for the junky harbor breeze :)

DON’T REPLACE THE OLD FAN WITH JUNK 😭😭

🤮

Please consider subscribing to see my next project!

More please!

☀️ P r o m o s m

By the way how long does it take to do that ?

I really need this advice if I ever loose my keys 😊

I changed mines today, was a heck of a job but thanks for the information you had gave, disconnected the battery first and then had to use a small 1/2 socket on a 1/2 ratchet wrench then use a 13 mm socket on a 3/8 ratchet wrench,

Please consider subscribing to see my next project!

not bad, thanks for making this. hopefully it inspires others to DIY too

Very cool, thanks!

Lmao dosent even show you how eh did it ha

Did you notice no Ware on the box or directions,80lbs pull .is listed.? No Ware.

Wasteing food an soda😞

Where did you get the mounting bracket?

Great! Both liminal spaces and the music!

0:00 Don't slip! 0:03 Don't enter there's someone there! 0:06 Remember when I took you there? 0:09 Those are not for you 0:12 Check each corner you don't know what's lurking! 0:15 Run 0:18 This was the daycare you were in? 0:20 We used to play games there! 0:24 Remember when you were lost there? 0:27 I-I don't remember this one... 0:30 I remember that stop sign! We were on a field trip! 0:33 You used to sit in that chair all the time 0:36 The subway train I used to ride.. 0:39 That was where your 12th birthday party was 0:42 That was the last day of school for 4th grade! 0:45 We used to eat there all the time.. 0:48 That place was so fun back then, now it's closed..

The one part I needed you skipped hahahah

Why didn't you show the outlet box assembly with mounting plate???

You adjust the height of the router plate with the pin screws in all four corners to get it level to the table all you need is a screw driver and you can adjust the router height with a Allen key from the top! Good luck!

Gracias!

no yeah Ihat was the part I came here to see

Try one of these really small ones, like 10uF. They don't have this dent on top and explode

Just based off of what I can see in the video, it looks like the aluminum router base plate needs to be adjusted and zero’d with the rest of the table. That ought to correct the ends of your work piece catching

🤣 promo sm

You didnt show when wiring, what wire goes to what wire?

Nice, You really get it off without removing the starter? I cant seem to get the wrench on the nut. Trying again tomorrow.

Best Video Work Smarter Not Harder😂😂😂🎉🎉🎉🎉

Changing 1 Tomorrow 😂😂😂😂

Tutorial “put up the fan and then screw it in”

Skipped over the one part I needed

Thanks for sharing, you were almost there! Onto the next video my guy 😢

The only part i needed to see what the part at the end you skipped with the blue and white wires. 🤦

I skipped the paper washers. Will that cause wobble?

0:26 Anti-flood tunnels under Tokyo 2:39 Bus from the SpongeBob episode Atlantis Squarepantis

My son installed a similar fan for me and it doesn't work. We bought 2 fans, so he even tried the other fan. Everything is wired correctly and the old fan he removed was a working fan. We are at our wits end trying to figure it out. No light or fan. He tested and there is power going to it. Any help would be greatly appreciated.

The cat:starts vibing Me: starts vibing too My siblings: 👁🫦👁

Wiring at 2:07 Black - Black White - White Green - Green

Getting teady to install... the entire fan is held up by thoes 2 small screws?

How do you remove the light bulb globe?

Mine just stopped working on its own