Видео

Performance Pack only

I have read that all facelift mk8.5 st-3's come with lsd as standard but need the perf back for non-facelift

There's no specific brand, many diffrent brands sells these better ones with resistors mounted in the bulb. You can most likely find them in any car part store you like who sells led bulbs. The biggest store in the UK for example I believe is ceuk.

That’s cuz mode and sport are on the steering wheel so no need to

No worries! I don't know actually, I got the LED original tail lights on this one

Chain

Thanks!

@@dnrfroad I might get one as well next month 🤩😁

@@AlphaDalpha283 Awesome! Wishing you luck, you wouldn't be disappointed

At your local ford dealership, it's an ford original part

Must be a blast, and congrats! They do have some great aftermarket options so it's not a deal breaker

Sounds awesome, such a nice color for a fiesta aswell!

Don't really remember now, but a standard size like 4-5mm

I’m going to use 20mm long 4.8 diameter and 16mm head

@@georgeturner9300 That's gonna work great!

Indeed the design isn't the greatest. The clip can sit very hard and it's that who make the taillight not come off. You can use a very thin and long panel tool or mabe some sort of good screwdriver for the purpose. Because if it sits that hard you must be able to press directly under where the clip are. As shown in the changing of the rear indicator video

@@dnrfroad I managed to get them out, those headlights have very sharp edges which can easily scratch the paint. Thanks for the tip.

@@Ivzu Awesome you got them out! Yes the edges easily scratch the paint so have to be careful

You could try warming up the unit with a Hairdryer set on a med/ low setting, blowing into the access panel. This may make it easier to remove. Once out some silicone grease in the push plug to help with inserting. Not being odd but KY gel is also good for this

It must have been a great 3 years, some awesome mods you made to it too!

No special product, just a good general cleaner. The dirt comes of easily and leaves this result

Yes exactly, they fixed the issue in 2019

@@dnrfroad Unfortunately not true, my 1.5 182 HP Focus was made in November 2019 (wk 47), when I brought it to the Ford Performance garage for the first service in September 2020 they saw mine had the same problem., they were supprissed since the engines made until approx May 2019 could have this problem and mine was made 6 months later.

@@dnrfroad Can't confirm that either. With mine, (Fiesta ST mk8, MJ 6/2020) the leak startet after 4 years and 60.000km. They discovered the leak during service. But the sealing was renewed under my 7 year warranty. It took two days

Yes, Fiesta and the focus with the same engine are affected

@@dnrfroad Thanks for the quick reply. Mine is from 2020 thankfully

@@wegvS No worries, nice then you're safe! Not something someone would be put of to buy an 2018, but be aware and keep in mind

Mine is from late 2019 and I hat the issue too… So don’t feel to save if yours is build after 2018 ✌🏻

@@maikschultheiss8898 Mine also, made in November 2019

Yes you're right the paint isn't that thick, but unfortunately most newer cars have that problem due to thinner paint

@@dnrfroad Does your car suffer from squeaky interior door grab handles?

@@Ivzu No it doesn't, is it a common thing? Haven't heard about that

@@dnrfroad I have it only when it's above 20C. Will have to take them apart and put some foam tape between the two plastics. I wouldn't say it's very common.

@@Ivzu Dosn't sound great, hope it solves the issue with the rattle

No not the headgasket itself as the focus rs recall was

Correct. The oil leak is at the crossing of distribution cover and lower and upper engine block (a T crossing) Sorry I don't know the exact english words, I hope you understand.

These are simple and cheap ones from ebay/aliexpress. Had these lay around, but just search for H8/H11 ones and you will found similar. 6000K colour is what i've used here

Okey thanks mate.. Keep up the good work greetz from Amsterdam

It's an original mounted socket for the engine heater

@@dnrfroad thanks, thought it was a bit strange since my mk8 ST doesn't have one.

Wow just heard. Expect 2nd hand values to go through the roof (again) now for clean low mileage models.

@@jonathantaylor3750 yes I'm sure

Great purchase, awesome little car! Sounds great that you'll enjoying it. Sadly it's true that the fiesta won't continue

The lights comes out slithly outwards and then back as you may se in the video how the clip is mounted. You have to get the front/triangler part of light outwords first a little bit, thats the only clip that holds it in place that hard. I would recommend either try to pull the triangler part fast and hard in a controlled manner. Or get a long and thin screwdriver, so you can try to press were the clip is mounted in under the light, better is a platsic paneltool but they usually aren't long enough. Be sure to use a towel between so you don't scratch the paint. Hope it helps and you get it out!

There is another pin at the front end. You can see it at the top left briefly around 2:50 and 2:55. It's the silver/aluminium coloured pin with groove around it. It locates into a plastic tube in the body work. Once you remove the main plastic screw and spring and pull the rear of the light outwards you still have to disconnect the pin at the front. Pull the light away from the car and slightly rearward. On my car the plastic tube came out with the pin but I left it on the pin and it all went back in later.

Really great car you won't be disapointed!

@@dnrfroad still have to do a testdrive 😁

Indeed it is, a great purchase you've done!

Really like the sound of the open air filters, still not sure on which one to go for. Getting my ST-3 next Monday!

@@devonvg18 Agreed, really nice sound! As long it's not an really cheap one I think it will do an good job and mostley come down to what you prefer looks and service. Congrats, must be exciting! Awesome little car, hope it will live up to your expectations

Tackar! 👍 Visste inte att dom var så udda! Förklarar varför man sällan ser en 3-dörrars

Mmm.... Vi har de två nordligaste, resten är i Sthlm å södra Sverige. Som du kanske börjar misstänka så har jag en likadan, fast röd. Men det roliga är att båda är i Borlänge...🤣

You could import one

Don't think you can order them online, go to your local ford dealership and order by them

Bought these not long before i posted the video. And they fit straight on, the st line rear bumper is the same as the st one. Just the diffuser that differ

@@dnrfroad It depends in which year your car is built

Never heard or seen that, what's differ?

@@dnrfroad The shape of the rear bumper is a bit different www.fiestastoc.com/threads/rallyflapz-on-st-edition.324829/

@@davymaekelberg Apparently it seems so, strange by ford. It looks like you can fit them, but not a straight fit so it need modification of some sort to fit properly on the bottom. Thanks for info!