Видео

What exact model repair was this because my "12 Pro Max" is model MGDE3X/A and it does not have the ear piece and face id components screwed to the LCD. In fact they are attached to the motherboard. weird

Caution! Incorrect application of liquid metal on the processor The video demonstrates an incorrect method of applying liquid metal, which could lead to serious issues with your device. Using the syringe's needle to spread the liquid metal and applying excessive amounts risks overflow when securing the heatsink. This overflow can cause the liquid metal to spill onto surrounding circuits, potentially resulting in irreparable damage. The correct method is as follows: Clean the surfaces: First, remove all old liquid metal residue using clean cotton. Then, thoroughly clean the processor and heatsink surfaces with isopropyl alcohol to ensure they are completely clean. Apply a small amount of liquid metal: Place a very small drop of liquid metal in the center of the processor and the heatsink. Distribute evenly: Use the special cotton swabs provided in the liquid metal package. Spread the liquid metal with circular motions, ensuring it evenly covers the entire surface without overflowing. By following this method, you can avoid risks and ensure optimal cooling performance. Please be cautious, as the incorrect application shown in this video can cause irreversible damage to your device.

Can we use thermal paste instead of liquid metal?

You are not at all gental with people's property, dang dude...

Great job man.detail to detail.🎉

Thanks you presentation was clear and precise, apple was suggesting I need a new phone, will try a battery first

How much does this cost? Looks like a lot of work...

I did mine just like a video and it looked nice and hdmi didn’t won’t still 😭

Thanks for this, I fixed a phone for my friend today. They quoted him almost $400 for this repair. I got the screen, a heat gun and some adhesive all for under $150 including tax.

Do you have to remove the screen? I just want to remove the screws for the battery in my scenario.

dum video no screen was replaced..

What rework station are you using?

Thanks for posting. Very helpful!

Thank you so much. The explanation was on point. You made it very easy.

Nice video! You do not need to remove all the black screws on the back. Not unless you want to pull the upper board. . Hdmi port is on the lower board! The long silver screws keep the two halves together

All this to change a hdmi port Jesus

Hello, 4:35 on what temperature setting snd level of airflow do you use the hot air gun so that the plastic connectors for the ribons not to melt?

is this OC bro?

What temperature u used for soldering little wire red and. Black i burn my bored wire wont stick

So the wires on the motherboard came out while was adjusting the joysticks, is there a way to replace them back on? I don’t see the metal wire part at the tips just the red and black wires

What type of screw driver do you have to use for this?

Thank You.😁👍

What brand should I use and where can I buy it?

Was this ps5 already open ?

thank you !!!

If your ps5 can run ps4 games but, not ps5 games then this is the problem , I had the same thing once I did this everything went back to normal, also please keep your ps5 side ways!!!

So i should have my PS5 laid down horizontally so it doesn't overheat?

can you use silicone thermal paste or is that stupid??

Did you have to buy the flux separately from the rework station?

This video was awesome! Thank you so much! The back camera now works!!!! We’re really excited! 👍👍

Nice work on the hdmi. But i would take care of that dry spot on the metal liquid as it sits right behind the whole assembly. I had one overheating and turn itself off on me.

And you just saved a 16 year old girls life. Thanks so much man. Yes I did this myself.

thank you 🫡

this is the best tutorial video that i have ever seen for something like this

Do you have to remove thre whole thumbstick assembly? I just want to replace the potentiometers

what do i do if i dont have a heat gun

Hi, just finished my first HMDI socket replacement and all went well following your instructions. I found it was worth tinning the connector tabs before fitting the socket to ease soldering them to the board. Thank you.

Thanks! Useful tuto!

I really need to learn how to solder it can save money and come in handy even if wanna make side money

the most annoying removal sticker....🙄

how does this shit get so dusty. these mofos have only been out for 4 years

I think your mistake is that you only did one side with liquid metal, officially it says you should do both sides with liquid metal

I found this video extreamly handy. I'm going to try my hand with this repair following this video as a guide. Thanks!!!

This is why i just use pc. Tike to buy another PlayStation since its half the price of the repair. Nice

It would be vastly easier and require a lot less heat if you were to solder-wick most of the existing stuff out after mixing with leaded solder Also, it seems safer and less labor to once the old port is out, to wick all the old solder away. clean, then re-flux the pads, and run over with leaded solder to tin them. Drop the new port on top, legs still empty, and hot-air the port until it snaps into place with the tinned pads This prep and new tinning of fresh leaded solder will minimize the chance that you end up with a bunch of loose connections as you aren't missing half the solder taken away on the old port, too. Lastly, hand-solder the legs now that the pins are connected. Check for loose connections and bridging

Do I need to change the liquid thermal pads?

Great video, thanks for sharing. At 07:25, what are you spraying the board with, and is this step completely necessary? I'm trying to fix some controllers without spending any money on tools, and my school has just about everything needed except for cleaning solution.

I did this and now my gpu showing black display

Amazing skills! I accidently removed the left stick ribbon cable connector from the PCB :(. I tried to simply put it back in place but the left stick is not working anymore (there seems to be a lot if pins to align correctly within the connector). Do you happen to know if those ribbon cable connectors are also soldered to the motherboard? I can't believe I removed it so easily. Too bad I live in France, I wish you would repair my controller!

HI! I bought a broken xbox series s and I would like to try to fix it myself (before practicing on some cards to throw away), could you please recommend an air gun around $150? Something just right to start with. Thank you!