Видео

Your soil is very wet. What would happen if the water is coming up from beneath the ground. Would this work with a deeper pit with holes drilled into the bottom.

Hey. You still happy with it? I'm thinking about buying one.

what about the oilfilter replacement

The brush you are using to wash your car will over time scratch your paint, better use multiple wash mitt or micro fiber towel.

probably could have run water through it and listened for flow before penetrating the pipe

I just did an install of the same clothes line and was curious to see what others had done. Basically, if you follow the instructions that come with it, you can't go wrong. This guy didn't really follow the instructions, so likely won't get as long a life out of this clothes line before it rusts at the base of the pole. 1) Use gravel, bring concrete up to the flange at the top of the plastic holder. 2) The flange should be level or above the level of the surrounding ground. 3) Use proper concrete and mix in a wheelbarrow. Ensures a better quality concrete and allows trowlling the top into a dome so water flows away from the clothes line pole. All of those steps ensure longevity of the clothes line. I've just replaced one of these that was concreted straight into the ground below ground level (not plastic holder) and it rusted and snapped at the base of the pole well before the rest of clothes line was end of life.

REMOVE FRONT BUMPER!!!… contact with an object can damage frame!!!!!….

U needed the 48inch

Probably stoned

Thank you

What a lovely Garden Like 2 My friend thank you for good sharing 😊

Only a harley rider. At least my ears will get a rest from the attrocious earsplitting racket

I would have put cement under the pit to keep it stable. But good job!

Amateur hour

my cover wont slip back on because of the brake position.

How much does the ts242 take oil wise for drain and renew? Thanks

The weather in Perth seems to be getting worse. My gutters are cleaned every year. But in last couple I'm getting some flooding. 2 down pipes go to well under ground that has no air ventilation. What I would like to know is if they need a vent to prevent pressure building up and so stop flow ?. Many thanks to anyone that can answer.

@rhettcorbett3346 Guessing you were there to witness this then with that sort of uneducated comment?

You doing a lot of walking, very nice place

Please do not glue the Sched 40 drain pipe to the top grate unless there are screws holding the grate so you can remove it for cleaning.

Too deep?

new subscriber👌👌

You have a beautiful property and the rain is keeping it cool and clean. 👍 🌺🌸

Using a yellow Jerry can which are used for diesel.

This gauge world be installed vertically.. not horizontally.

The snap T's usually have grooves to run a couple of hose clamps either side which alleviates that one concern you had.

Do they auto turn on when they get dark or do you have to manually switch them on/off?

What if rocks dirt mud etc falls into the pit .. it looks like it will go directly into the PVC and block the pipe ?

I wonder what that wood would look like as furniture?

I was just looking at the trans. on this ts248xd is a k46DL the ts348xd is a k66dl the k66 is a muck better trans.

Thanks for explaining how to actually READ te guage. Everyone else just explaining how to install it.

Is there a fuel Shut off valve ?

Thanks for testing out our STA-BIL Small Engine Pro product!

Too much time

Probably doing something stoopid as usual.

Thanks. Helpful video. :)

thanks for the video, I got one of these today and tomorrows job is to put it up. fingers crossed this laundry lady can dig the hole deep enough in the clay dirt lol

It’s very good looking ❤

I am indigenous Montagnard jarai love roses I have 4 double knockout red roses I planted in pots love it 💜💜🌹🌹

Would really help, if you mentioned how much water you were adding ..

The engine is garbage ,despite 100 hour oil changes as recamended they start clanking at about 12000 hours 🤧

I've got the same issue with my zero turn. I have thought about drilling out the rivets and using bolts to attach a new deflector or spraying in the foam gap filler to hold it together for another season.

Do you have any tips on how to make pit drains quieter. We have lots of water running into ours and it is very noisy right near our bedroom.

New subscriber

What about leaving a space between the ground socket and the lawn so you remove the dryer and mow the lawn over the area!

What is the name of that hedge plant? and how do you dispose of the trimmings?

Why didn't you just use a spade bit? or a hole saw?

Finally got one...Dropped it and all the bits fell out lol 🙄Can anyone post a video of how the bits (cogs& string)are ment to align so the pully from the float to the needle actually works 🤔😜

Very helpful. I was looking for something exactly like this, but this person forgot to show the hole.

How’s the mower you still happy with it?