Видео

If it's running with 2 pistons, that's just perfect

What was it?

1,5 Zylinder Motor. Übrigens, abziehen Stecker beim laufendem Motor kann zur permanente Einspritzung führen.

WHAT THE FUCK IS A "TOURBO"??

Soldan iki enjektör çalışmıyor

2 injectors are bad

That just shows the last two cylinders are dead you still contest if the injector is getting any pulse try a mechanics stethoscope and hold that on the injector see if you hear ticking noise sometimes you can do the same thing with a screwdriver. You also want to check the ignition coils if they're giving any spark

Swap the 2 injectors with the other 2 if problem is still in the same cylinders it's a bad head gasket and if problem is on the other side it's the injectors and that's all I have to say about that.

This "engine" needs a new Engine

Don't know if those are injectors like everyone else is saying...looks more like a ignition coil harness where the last two cylinders have either failed ignition coils or the harness itself has failed on those two connectors. If it were my money, I'd bet on the ignition coils being bad...easy to test... take the coil from one of the cylinders that's running correctly and swap it into one that isn't. If that cylinder now fires correctly, then you know it's the coil.

My Spidey senses tell me the engine is definitely the problem.

Why???

Those injectors are bad or the wiring

It ain't got no gas in it

It's just a 2cyl with the premium extra 2 for high load freeway applications. Ya know.. more emissions crap

The fuckit valve is stuck sideways

The first two are working the last two are not.no change when taking the wire off.

Last 2 are stuck open

Needs new injectors, they blow by fuell, return pressure to high.

Inline 2 cylinder 👍🏼

P0200

Re-install engine cover, problem fixed.😊

Just a limp mode… it’s fine

Форсунки 2

I think the main problem is you not wearing gloves

That’s eco mode

Indian working on the car instead of a Pakistani. Too easy of a question.

The last 2 injectors he unplugs aren't firing... Like, at all... That's my assumption anyway, considering there is no change when he unplugs them...

Running perfect

Needs some muffler bearing elbow grease monkey nuts 😊

I know whats wrong with it !! Its the mechanic, he has no tools 😵😫

works in two cylinders

Форсунки первого и второго цилиндра льют беспрерывно. Снимать все 4 и в ремонт. Детонация не щадит дизеля.

Bad injectors

Sharing blown gasket 3and 4cylinders or bad wiring harness on 3and 4

Прокладку нужно поменять между рулём и сиденьем

What’s the problem, lol. Where do we start!

Blinker fluid is low probably the right side front.

Система зажигания 1 и 2 цилиндра. Свечи, катушки, или провода

Are those injector wells completely full of oil…?

Con rod bearings or wrist pin

It make clak clak easy

It aint got no gaaas...

It Has Adjustable Rods .......

Some people thing oil changes are bad😂

Uiuiui die pleuellager sind tot

Next time take the oil Pan off first

Wristpin, connecting rod, bearing or crank throw.

Usually there’s a rod bearing there 😂

Wrist pins or crank bearings