Видео

Mine works and shuts off kick the dash it comes back sometimes is it the motor or resistor??

9/iron, Great content!

I have de same problem on reverse ???

I’ve got the same puller and it will only thread onto my crank 3-4 turns and then won’t go any further. Any suggestions?

Son of a...mine doesn't have that butt plug, which would explain the no fuel to the injectors problem. They're not sold individually either. I may have to redneck engineer something. Maybe a plastic cup, curve with a torch?😂

I had the same exact problem . Handy dandy die grinder and good she goes

Your camera angle is terrible

This helped a ton and saved me a ton of time and frustration trying to solve the same issue. Luckily it was as simple as that! I ended up not taking the tank off and was able to adjust it just enough by reaching in from the PTO side.

Jeeps and removign fender wells haha, i like to add to that and put a manual oil sensor also. So that sfor this and I see how I can add that with may a Y.

I change that on mine and now it won't start it cranks but start

obviously a master troubleshooter/ technician. not for the kids to be around though!

3.8 v8??

Way big help! You rock wild man... Great One-liners to. Lmao

Taking downpipe off to change this gasket is crazy. Props to u but def not needed 😂

Will this sensor cause the jeep to over heat I've been having issues with my 2009 jeep wragler over heating I've changed out radiator,thermostat,water pump in it still over heating need some help on tracking this down

Your video sucks

Your the best man.

Part number plead

D.E.S.S. = defective electric shitty switch

What signs did you have that warranted changing the switch?

Fixed exactly what was wrong with my 2015!

Do you have any available still? My brother brought to X-mas party and we all loved it! I love seeing the detail in the process of them being made.

Very informative but you need to learn to keep your mouth shut. Just the facts!

no joke this video saved my dad the biggest heart break after rebuilding his rave valves and installing a left handed throttle. we accidentally pulled the cable too tight whacked opened the throttle a little bit causing this exact same scenario. thank you so much for this post! Fuck them people that want Hollywood pictures, I knew what you were doing!

F THAT. no way I would hit the gears. You did the right thing man.

Nice tip, man. I’ve chosen the same as you and change the oil pressure sensor. My ‘11 JKU started to show oil symbol on the clock sometimes when I start the beast on. Even playing the trick with the start key and gas pedal it went off but came back some time after. This week I’ll try to change that sensor. I noticed some power loss, too (safety mode). Let’s see.

Love the snark and the instruction. Thanks! And douch knot! 😆 A new addition to my own snark library.

Do you need shims or will it be able to clear over the rad?

Kohler lifetime warranty replaces parts if you are the original owner.

Thanks! Fixed faucet, handle kept falling off. Just had to tighten setscrew.

Did it fix your ticking sound ?

3.8 v8 🤔🤔

Thanks friend I believe you just helped me understand my problem 👍💥

im havving same issue on my freeride 2014! now im replacing the gas filter. also cluster is not working good, im thinking on some electrical issues on the main wires, or something about the exaust temp module.

Hello, did you have to drain the oil, before changing this pressure switch?

If it’s leaking from here will I smell coolant from the vents?

Making tough times a little bit easier.

LOL

gotta breath and hit the "G"reat spot !!!

Still Make em? If so how much for one?

Thanks bro, i was able to get her done with this info from you. I went with the oil pressure sensor socket though and that was a pain in the ars

How do you miss place your oil cap like bro cmon do better 💀🤷‍♂️😂

Laughing my ass off, thanks for the show and tell too

I have an 05 sdi 600 and it's not getting fuel I rode earlier let it sit for 30 mins then wouldn't start back up but it runs on starting fluid fuses are fine trying to get down to the issue.. new battery and new spark plugs

Torque spec?

Doesn't show one thing youre talking about. Zoom level 100

How did he know i was taking a shit?

Whether the shutoff handle is pointed up or down makes no difference. The valve must be swapped 180 degrees to either make the install right or wrong. I would like to know which is the right way.

That’s a 2013 resistor not a 2014

this was WORTH 29.05 mins. of my life,i like that your a REAL motherfucker trying make shit happen(the local shop is going to fuck me over on price if i bring it to them.already payed a loser $850 to fix my 2005 skidoo ,800cc mxz. (pull start its a BITCH to pull,its piped,canned v force reeds after market carbs the guy i got it from dumped too much $$ in to it)i am not getting gas ,(i put fuel in the spark plug and fires for a second)so i am on the right track about the fuel pump and what every the pressure thing is.thanks for the video,cuz when i do have dickweeds work on my shit ,they fuck it up.but i dont know how to fix everything under the sun.thank u for making me laugh(cuz i was ready to beat the fuckin skidoo with a hammer,i am ADHA and i get pissed off fast ,good day to u sir thomy schuuu