- Видео 149
- Просмотров 140 241
BuildyourownRC
Добавлен 13 май 2012
Budget RC planes, hints and tips
Cheap RC plane build 64mm AMX from AliExpress with almost all the parts!
I bought this kit from Aliexpress as it was cheap! Around $70 AUD delivered as just the kit (no electronics)
It came with no landing gear and missing linkages from the bitz bag so had to use my own push rod set up (stronger and more reliable).
I did contact the seller and they were great with communication. As The missing parts were not critical in my opinion I decided to proceed to build!
#diy #craft #rc #aviation #planecrash #rcplane #drone #repair #build #rcaircraft #64mm #edf #64edf #amx #building #5minutecrafts #rcjet #aliexpress #kit #italian #brazil #airforce #radio #radiocontrol
It came with no landing gear and missing linkages from the bitz bag so had to use my own push rod set up (stronger and more reliable).
I did contact the seller and they were great with communication. As The missing parts were not critical in my opinion I decided to proceed to build!
#diy #craft #rc #aviation #planecrash #rcplane #drone #repair #build #rcaircraft #64mm #edf #64edf #amx #building #5minutecrafts #rcjet #aliexpress #kit #italian #brazil #airforce #radio #radiocontrol
Просмотров: 555
Видео
RC F-20 TigerShark EDF Scratch build. After crashing my old EDF, this is whats next! #diy #rc #craft
Просмотров 409Месяц назад
After crashing my previous EDF plane of my own design, I reused the electrics and some of the body parts to create a low wing EDF. Based on the F-5G , later designated F-20 TigerShark with a few mods. As usual I increased the wing size by around 20%. This will make a slower but with a larger lifting area. As usual there are no real plans! One day I may try and create plans! #aviation #rcaircraf...
F-35 RC plane 64mm EDF kit from Aliexpress! All built, now to get it flying! It may have crashed!
Просмотров 1,2 тыс.3 месяца назад
F-35 RC plane 64mm EDF kit from Aliexpress! All built, now to get it flying! It may have crashed!
F-35 rc plane kit from Aliexpress! how to build.
Просмотров 1,1 тыс.3 месяца назад
F-35 rc plane kit from Aliexpress! how to build.
J-20 Mighty Dragon RC plane DIY build! How does it compare to the F-22 or SU-57?
Просмотров 2443 месяца назад
J-20 Mighty Dragon RC plane DIY build! How does it compare to the F-22 or SU-57?
Radjet RC plane Rebuild budget addition repair video! After 6 months in the boneyard, She's Back!
Просмотров 943 месяца назад
Radjet RC plane Rebuild budget addition repair video! After 6 months in the boneyard, She's Back!
Radjet RC plane Clone from China, Damaged! How to repair the squashed bits! #diy #drone
Просмотров 1594 месяца назад
Radjet RC plane Clone from China, Damaged! How to repair the squashed bits! #diy #drone
Building a Small Super Tucano Fun fighter! Can be under 250grams!
Просмотров 3154 месяца назад
Building a Small Super Tucano Fun fighter! Can be under 250grams!
DIY RC plane Hawk Raptor! Re-using the wing from my ill fated Pegasus. Best RC plane yet?
Просмотров 2245 месяцев назад
DIY RC plane Hawk Raptor! Re-using the wing from my ill fated Pegasus. Best RC plane yet?
Crashed RC plane! 100mph goblin repair video! Fast Rc plane drone
Просмотров 3636 месяцев назад
Crashed RC plane! 100mph goblin repair video! Fast Rc plane drone
DIY simple F-14 Tomcat with KF step wing, rebuilt after a hard crash! #f14 #cheap
Просмотров 4337 месяцев назад
DIY simple F-14 Tomcat with KF step wing, rebuilt after a hard crash! #f14 #cheap
DIY Flying Pegasus! Making a Corvo style My Little Pony drone with foam horse and foam board wings!
Просмотров 2268 месяцев назад
DIY Flying Pegasus! Making a Corvo style My Little Pony drone with foam horse and foam board wings!
DIY Mig-29 Fulcrum Parkjet Drone. Easy build, fast, Agile!!
Просмотров 2008 месяцев назад
DIY Mig-29 Fulcrum Parkjet Drone. Easy build, fast, Agile!!
DIY Cessna 310, the Ultimate foamboard twin! Easy to fly yet Aerobatic!
Просмотров 4058 месяцев назад
DIY Cessna 310, the Ultimate foamboard twin! Easy to fly yet Aerobatic!
DIY Mig-29 Fulcrum High performance easy build parkjet drone FPV capable
Просмотров 3828 месяцев назад
DIY Mig-29 Fulcrum High performance easy build parkjet drone FPV capable
Fixing up my old F-15 Parkjet after a year in storage! Will it fly again?
Просмотров 6829 месяцев назад
Fixing up my old F-15 Parkjet after a year in storage! Will it fly again?
DIY Cessna 310 Twin engine Build! 5 and 10mm foamboard! Would you make this?
Просмотров 1,5 тыс.9 месяцев назад
DIY Cessna 310 Twin engine Build! 5 and 10mm foamboard! Would you make this?
DIY Beginner Trainer fixed up and put to the test! Lessons not learnt!!!
Просмотров 3689 месяцев назад
DIY Beginner Trainer fixed up and put to the test! Lessons not learnt!!!
DIY Corvo Cardboard drone Wing made out of plastic
Просмотров 2969 месяцев назад
DIY Corvo Cardboard drone Wing made out of plastic
Cardboard Drone Corvo DIY #rcplane #cheap #cardboarddrone
Просмотров 29110 месяцев назад
Cardboard Drone Corvo DIY #rcplane #cheap #cardboarddrone
DIY F-18E Super Hornet Repair video, Back from the Boneyard!
Просмотров 21910 месяцев назад
DIY F-18E Super Hornet Repair video, Back from the Boneyard!
Easy DIY Spitfire Takes flight!! Flies great but Landing....... you'll see
Просмотров 13010 месяцев назад
Easy DIY Spitfire Takes flight!! Flies great but Landing....... you'll see
Easy DIY RC Spitfire from recycled materials! Cheap to build sports plane drone
Просмотров 1,2 тыс.10 месяцев назад
Easy DIY RC Spitfire from recycled materials! Cheap to build sports plane drone
The Beginners RC Trainer Plane taken to the limit!
Просмотров 24310 месяцев назад
The Beginners RC Trainer Plane taken to the limit!
Build your own Biplane, taking the basics of wing construction X2, and a basic Fuselage. No plans!
Просмотров 1,8 тыс.11 месяцев назад
Build your own Biplane, taking the basics of wing construction X2, and a basic Fuselage. No plans!
Mini Talon FPV Drone scratch build Mods! Can we make it fly better?
Просмотров 27411 месяцев назад
Mini Talon FPV Drone scratch build Mods! Can we make it fly better?
Build your own Mig-25/31, Easy box and wing plate design. How to create your own design! BYO Parkjet
Просмотров 52911 месяцев назад
Build your own Mig-25/31, Easy box and wing plate design. How to create your own design! BYO Parkjet
How to fix a damaged RC plane! Crashed? All good lets fix it!
Просмотров 40111 месяцев назад
How to fix a damaged RC plane! Crashed? All good lets fix it!
What is the best RC Plane? I got my F-22, SU-30, EFXtra, FPV drone, Corvo cardboard drone and more!
Просмотров 297Год назад
What is the best RC Plane? I got my F-22, SU-30, EFXtra, FPV drone, Corvo cardboard drone and more!
Scratch building is definitely better as gives better satisfaction and you can build to your own quality standard unlike ARTF/RTF
100% agree! Kits, even from reputable manufacturers I have found need some sort or repair/re-design more than half the time. Building your own gives you that experience to become a better builder and a better rc pilot!
Sweet stuff
Simple genius!!!! I hope you wont mind if i "borrow" few ideas? 🙂 good you commented my vid, so I found you and i see i will learn some interesting stuff! All the best!
@@woody7739 borrow away, that is why I post! To expand the hobby!
@BuildYourOwnRC thx, and see you around!!!
Dude this is sick!
Cheers!
Any chance of a plan please Sir?
I just use a google 3 view image and make a wing plate out of 10mm foam board. I don't have plans unfortunately. From there I used the 3 view to create the side pieces.
Flies great don't it. I also have the Alpha jet, easy build
@@albertwebb3051 Oh cool, how does the alpha jet fly compared to the AMX?
@BuildYourOwnRC it flies good, seemed a little tail heavy at first, but after a little trimming all good.
@@albertwebb3051I love all the trainer jets. I may have to look up the alpha jet. I have an F-22 coming soon!
Cool😮
Nice!!
I purchased this kit as well, and the air frame that arrived had a wing span of approx 610mm, instead of 680mm that was indicated in some of the listing images, may I know what was the ws of the plane that you got? My final AUW came in at ~800g, may I know how heavy was your build?
@@FoolSendRC Wing span is 610mm on mine, RTF with 2200mAh 4S is 845grams with gear fitted. The listing did indicate 680mm span.
@BuildYourOwnRC thanks for sharing what you've got. my final AUW is 870g with 4s2600. it does seem quite heavy for a EDF jet of this wingspan, I hope it doesn't fly too badly
@@FoolSendRC I honestly feel the AMX I bought after is lighter and easier to fly on 3S! (645gram with 3S 2200) Hell, my scratch build F-20 flies better than both of them.
@@BuildYourOwnRCI watched your AMX build video, it does look a bit more involved to put together compared to the f35 I've installed a 70mm thrust vectoring nozzle (modified for yaw moment only). will throw it in the air one of these days n see how she flies lol
How come,the rear servo's let the elevator works the opposite way.
@@gerolddo The elevators are hooked up to the elevator and aileron channels in the radio and operate with elevon mixing! I then plug the aileron servos into a Y lead and the Y lead into channel 5. I then mix channel 5 with the aileron channel so they operate independently from the elevator.
This is a awsome build video and the plane looks so good
Cheers, I haven't actually flown it yet so hopefully have some footage in the coming days
@BuildYourOwnRC awsome
Is there a simular kit to this with is a harrier and has vtol for low cost?
Not that I have found, but that would be kool!
Nice! Did mine and it flies great using a 4S 2840-2822kv motor I had sitting around.
Kool, mine had a faulty receiver on my first launch so I need to do some Repairs. Unfortunately forgot my camera that day
SHOW 💯
Look heavy what power plant are you thinking
@@bsimpson4158 power is from 2 x 64mm 5blade EDF fans (will look over sized but that's ok)
I use foam poster board from dollar general it's $1.50 a sheet and takes about two sheets to make a plane. Love it 😊
Bro even did the cobra 💀🗿🔥🔥
Yeah, the tail throw is a little high. I need to put the clevis further out. Either that or add some expo and keep the throw for full stick manouvering. It does recover well
That looks nice
I have wanted to build one of these for a looooong time. Not sure way I waited so long! Too many projects ts and ideas and things going on...
Nice respect
Cheers man!
That looks awesome! Well done!
@@DazDaMan Cheers!
whats the weight? i have a similar biplane but im having weight issues so do you mind telling the weight of the build and the materials you used? thanks
I'm assembling mine now. Great video with plenty of information. I'm putting a 70mm fan unit inside 4-6s. I want some speed, but vertical performance is a must.
Oh Nice, would be interesting to see how it goes! 4S is definitely the minimum for this model. A 70mm fan though wow!
Plans please?
I like when people do simple rc airline e thing this is the video I want! Please 777 next
@@libertycounty9656 I'd better finish the 737 first, then see if it actually flies! Then I have a different method for then next one! 777 would be a great fit!
Damn thats sick 🤯
Pdf plans?
No plans as usual. But here is the video from when I built it! ruclips.net/video/3bXMqUNxXoQ/видео.htmlsi=fQPoyNwBNUBfkLmG It really is just a box fuselage, 2 basic wings and a tail!
nice
O dear hope you have it all back to gether 😅
@@judahRC It's replacement is coming together in a new design! Stay tuned!
This looks amazing Do you have plans I would love to build one and send you a photo when done
@@judahRC I don't have plans unfortunately. I just pull images off google, usually 3 view drawings and transfer to grid paper. If you follow one of my repair videos you'll see its just a KF style wing with 3 layers of foam for the "wing box"
So cool I watch all your videos I love building phone board plans as well
@@judahRC cheers for watching! Loved watching your vampire flying! Ever since I saw one in the metal at a Museum in Dubbo, I've had a soft spot for the vampire and just how compact they are in Real life!
@BuildYourOwnRC thanks for the compliment Love the builds Eagerly looking forward to the next video
Sorta reminds me of the f18
The original design was a meant to be a cross of the smaller teen series jets like the F-16/18. High wing to make it easier to fly and a large LERX section like the F-18. It flew extremely well, so much so an idiot like me decided it was a great Idea to see if I could fly it like 2 inches off the ground!!!
Awesome little bird 👌🏾
I'm interested in building the DHC Haviland twin otter
@@davehenry-hl5mt They are an awesome plane with A LOT of possibilities! Which version were you thinking about? Older model, newer model, floats or landing gear? So many options!!!
I saw this jet on Banggood for 55 bucks but i got moneyless, rn I have money but is over 100 ,in Aliexpress is only 70 :p
Yo that is sick underrated channel
@@BananaMana8122 Thanks! Glad you enjoyed it! More coming down the pipeline
Can we have plans for your simple SU57 please Sir?
@@SteveAdams-q5q I'm not big on plans, I trace out a wing plate from a 3-view image from Google, and use the side images to box the rest in
I like that a lot,would make a great hack aerobatic model. Any chance of a plan please Sir?
No real plans sorry, just a Flitetest style wing and a slab sided fuselage taken from a Google 3 view image.
Please can I have a PDF A4 printable sheets plan Sir? Many thanks Steve
@@SteveAdams-q5q I will have to see if I can make them into A4 printable when I get a chance. I'm not big on using or making plans
tutorial make f22 bro🙏
@@IMPhomeStudio2024 I'll have one in the pipeline soon after mine exploded in the air as can be seen in this video at the end: ruclips.net/user/shortshoGCe-ho6bs?si=1XBBXIBCnbHbLs2j
Awesome video. Where is CG at on this?
@@chrislayne3653 I used the same COG as the freewing F-35, seems to work great! Take a line across the wing roots and back 4mm.
Grass too much friction, try cement take off will roll faster ! Awesome build
@@PilotDEE38 Stay tuned for the 4S upgrade!
Esta muy bien y Me gustaría que enviara los plano
I can imagine me flying through the woods on the flamingo
@@joepowell8950 So true!!
F20
@@Matia-r9g Funny you should mention the F-20. Stay tuned over the next few weeks!!!!
@@BuildYourOwnRC haha few weeks
I so wish I could send pictures! I have just about finished one of my very own foam board builds! Lots of inspirational building techniques came from watching Flite Test growing up.
Heyy can you help me to build this for my college project please!
@@TIKKIALOOOI'll do what I can. What do you need?
@@BuildYourOwnRC dimensions or measurements
@@BuildYourOwnRC if you use any social media please tell me so i can build this under your guidance 🙏
@@TIKKIALOOO I usually don't make plans but here is a link to a mini version that I drew up. It really is a basic flitetest style wing on a box fuselage. Add a tail and your there. The larger on has a 40" wing span with an 8" base chord. The fuselage is a 4" x 4" square tube. forum.flitetest.com/index.php?threads%2Fcorvo-mini-drone-easy-to-build-high-performance.74784%2F#post-753701
Do a video of it flying
@@joepowell8950 If you watch the following and zip forward to 8:30 you'll see how it "Flew"! ruclips.net/video/EevyWq1JFlY/видео.htmlsi=VcfhbZ11UdvXmCrM
This is what came of the wing ruclips.net/user/shortsgYfh_RielJA?si=CwZgCcoxz29-XnHR
where is the center of gravity..??
@@rmgcustoms4667 It isn't marked but its around 4mm back from where the wing root joins the intake. I had to look up a freewing F-35 manual to get an idea of where it is! www.motionrc.com/pages/freewing-f-35-lightning-ii-v3-70mm-edf-jet-support-page?srsltid=AfmBOopSNK41V6vTvPbGGUbToD1rFyd_jvvVlj0ZyWt2WBV-dMBk2B9W
Found this kit on Aliexpress and want to modify it for hovering and horizontal flight. Now I know exactly what to expect right out of the box.
@@senorowlando Awesome! That'd be great to see! What power system are you looking to use?
Can you please let me know where your center of gravity (CG) is on this jet?
@@funfairmeccanopolyp I used the same COG as the free wing version. Its roughly at the wing root!