Видео

Your graphs are off the chain! It's like a loading bar

My kit came preassembled, and it had the red rubber ring sandwiched between the 2 washers. In his video, he has the last washer on the other side of the metal sleeve, not up against the rubber washer. Not sure it really matters, but it is different than the way mine came.

Please, which is better, Energizer 2300 mAh batteries or IKEA Ladda 2450 mAh batteries? Please advise.

Eeeep

Was looking for a refresher. But I don’t remember soldering it like this.

Best video on the whole RUclips. Thank you for your effort.

I hate this connector and its cable so much. Great guide though thank you!

Спасибо за инструкцию! Не мог найти вариант с таким анкером!😊

Mine are not rechargeable at all. I asked for a full refund on those and got it.

👍

XCLNT PRESENTATION BRAVO ⭐️⭐️⭐️⭐️⭐️

Great video. So sad to see that the website is down. I really wanted to look thru to get a good rechargable battery as the one's i use currently (vapcell chinese manufacturer) exploded in price ($13 for one AA battery). So im intersted in an alternative. The Vapcell are just great because they provide 1.5V constant potential untli they die.

Собрал неправильно! Шайба с большим отверстием должна находится между рыжим, резиновым уплотнителем и распушеной оплёткой. Эта шайба прижимает оплётку к втулке, вставленной под оплётку, тем самым удерживая её и создавая хороший контакт. А не с другой стороны фланца втулки.

I've found the black 'Pro' batteries terrible; they randomly stop charging after a few months of [very light /infrequent] use, whereas the white variant have years more longevity. I seem to have lot've dodgy Pro batteries, but as you can't prove how genuinely few times they have been re-charged, before their overly premature death, Panasonic are uninterested in any potential issues. Meh.

Great video thank you

Incorrect! The braid must be squeezed between the nut and the anchor. In your case the second nut is useless, it must be put before the anchor, not after it.

The Eneloop Pros are the best rechargables.

Ты лох, не так шайбу поставил.

Excellent -- exactly what is needed for complete, step by step. Bravo!

what size/diameter solder do you use? 0.5? 06?

Thx for sharing 👌🏻

Which one better for pro camera flash?

Thanks to you, I was able to solder my BNC plugs. Thnkx!

This is definitely NOT the proper way to solder a pin to a conductor. You heat the pin first, preferably on the side opposite the solder hole and then let the heated pin melt the solder and pull it into the hole.

Thank you for sharing this information.

What size diameter solder do you use ? 0.5mm^2?

I can't find that model BNC connector. Who sells them locally in southern California--orange county?

Eneloop pro black are the best in the word

Eneloop pro black are in the world!!!!

Great job! But, I know my limitations, and that why I crimp.

Yes, white are better for me, because of number of cycles. Wanted to find broken white one (natural fail), not on purpose, because yes, you can recharge them from mains and broke them. Also bought broken ones (marked as broken) but after charging they were working.

Music was too annoying to watch it all the way through.

is true are totally shit batteries

Push the Anchor for me very very difficulty!!

@WhatCell You have forgotten one very important test: *self-discharge rate over time* NiMH batteries usually tend to have higher self-discharge rate, when it's capacity is higher. While the eneloop batteries have generally a low discharge rate, compared to normal NiMH batteries, which makes them so special, i would still assume, that the eneloop Pro with the higher capacity will self-discharge a little faster than the normal eneloops, but not as fast, as normal NiMH batterie. You should really check that out.

I bought a different type of Dolidada recheargable batteries and they are not recheargable. Fraud.

To minimise the risk of a dry joint, tin the coax first before trying to solder the pin.

Hi, you have to heat up the pin from one side with the soldering iron and push the solder into the hole on the pin from the other side. Thats how you solder a pin on a cable. Because your way you can never be sure how much solder has actually reached the middle wire.

Это мусор а не аккумуляторы

MAKE SURE IT IS SMALLCABLE. IM DRUNK. LOL

Sure. I bought a 72Ah battery😂 and it result less than 10Ah.

Eneloop Pro offers Higher Capacity + Higher Discharge rate, but less Charging Cycle & Short Shelf Life. It can be used in Camera Flash, High powered RC Toys. Eneloop White offers slightly less Capacity & slightly lower Discharge rate, but more Charging Cycle & Longer Shelf Life. It can be used in Remote Control, Wireless Controller, Wireless Mouse/Keyboard, Low powered LED Torch.

Great review. I'm planning to buy the Eneloop pro for the Xbox Series S controller. :)

very interesting what you published. Your page whatcell.org is no longer active. Where can I find the comparison chart you quick showed on your video? Thanks!

I have this exact connector. Was desperately looking for a 'how to' video (or even a textual explanation). You explain it very well (and at a pace that allows me to simultaneously solder the thing without pausing the video)

hi my pin has no hole

The delivery was clear.

Clear and concise. Thumbs up!

Thanks man

Thanks