Видео

My truck is a 2018 Sport 4x4 with factory tow package. I have a 2/4 drop. I initially I went with Belltech drop coilovers up front and Belltech flip kit w sway bar on the rear with Belltech rear shocks also. Not gonna liez it rode like a brike fireplace on skateboard wheels. Was NOT happy. So I switched things up a d went with FOX coilovers up front (factory length) and MaxTrac 2" drop spindles. I kept the flip kit and sway bar on the rear but went with FOX shocks on the rear. Night and day difference in ride quality over the Belltech setup. another issue I ran into with the Belltech drop coils was that you could never get your front camber to 0 degrees because the factory bolt holes are not long enough to allow for that. you would literally have to elongate them by grinding or cutting the slot which I did not want to do. The drop spindles allow you to have correct geometry and get a very good alignment without any grinding or cutting of anything. My truck still has factory upper and lower control arms and I have 22x10 wheels.with 305/40 Nitto tires ans zero rubbing issues. The only thing with the drop spindles is that you cannot go full lock on the steering wheel.. which I never do anyways and it is a nine issue. But also with the drive spindles it is required to have a 20" wheel or bigger to clear the lower control arm bolts. IMO I would get a minimum of 22" wheels because in my experience there is only about 1 inch of clearance between the wheel and the bolt. Its in a fixed position and would never rub but it would be really tight with 20s opposed to 22s. I personally wish Inhad went with 24s... just my preference. My truck has A little bit of rake in its stance... meaning the back is a touch higher than a teuck would be that does NOT have the tow package and/or is not a 4x4. I dont mind though because I haven't had to add helper bags to improve ride quality or to put any weight in the bed of the truck. It doesnt bottom out the suspension at all. I have had 30 bags of mulch in the bed too. No problems. My truck is a concrete queen and stored winters. Never seen snow either as I bought the truck down south in Arkansas bone stock configuration and transformed it when it got to Michigan. I dont drive it on dirt roads and it doesn't even get driven in the rain. Always parked in my garage. Good luck with your build!

@@icemanj12 I went with Belltech drop spindles , their drop struts rode like shit .. once I did the spindles what a difference.. I still have the flip kit , but I’m planning on replacing the rear shocks at one point , I also want to do coilovers in the front ..

@@icemanj12 one last thing , did you have any low speed vibrations with the flip kit ? I ordered 6* shims to correct the pinion angle . I’ll be installing them this weekend, hopefully it fixes my issue..

22x10 Black Rhino Karoo (gloss gunmetal finish) with 305/40 Nitto NT420V tires

Not sure, but I think you'll get some rather nasty drone if you do....

I would keep resonator and get a muffler like the Pro XS or the Borla Atak if you want something on the louder side

It’s Higher by Eminem

O MI GOD MÃ XD

I’m not trying to be a downer but Krysten didn’t even get that high

@@ausproductionsofficial you are completely right. There have been so many jumps higher higher what jrysten did for the record. The only problem is those just happen spontaneously and there was never anyone to judge the height. Kreg was wayyy higher

@@andylasceski kreg would definitely be the current record holder jump wise had it been counted for for sure