Видео

Hello, thank you for your message. Unfortunately, we have no experience with Ventura racks. I have looked at the products on their website. I assume that our universal rack should fit. But unfortunately I can't say for sure...

Hi! We have 5 years warranty on all our products.

Hi! We always develop our articles on models in their original condition, so unfortunately we cannot say whether the assembly with a Tail Tidy will fit. Sorry 😞

Hi, you have to remove the left C-bow holder to open the OEM toolbox.

Hi! You will need SKU 6607638 01 01 (here: www.hepco-becker.de/en/Minirack-soft-luggage-rear-rack-for-Ducati-Desert-X-2022/6607638-01-01 ) The required screw set is included with the item 🙂

Hi! Yes it is possible. We only mention sth like that, when it's not possible 🙂

@@HepcoBeckerDACH Thanks a lot for answer. Now I just need to decide for combination :-)

Hi, I'm very sorry, we have a different upper crash bar for the normal 1050 (this one here: www.hepco-becker.de/Motorschutzbuegel-schwarz-fuer-Suzuki-V-Strom-1050-2023/5013550-00-01). Unfortunately we don't know whether the OEM lower crash bar will fit :-( We only had the model without OEM crash bars in development.

Hi, not, all top loader cases can't be open while top case is mounted. Only the ones which can be opend to the side (for example Junior side cases) are possible. But the combination of them would not look great, because Junior is plastic and xplorer is alu.

Hi! The xplorer series has only one black, similar to the Xceed Black. Xceed has a "deep" Black and the other one called "Jet Black", which has a little brown toning in it. I've just looked in our online shop, but I don't see any ‘Black 2’. Where did you see that, then I'll have a look and have it corrected.

@@HepcoBeckerEN I think it was on the Chromeburner site NL. Thanks!

Hi! The new Stelvio is in progress in our developement department. Parts will come soon 🙂

Hi, yes it has additional openings so that the water can always run off easily. You can see them best here: www.hepco-becker.de/en/Engine-protection-plate-aluminium-for-BMW-F-800-GS-2024/8106537-00-12

Hi, no, the Solroack is only for the 2021er model. There is no Solorack for the 2018er available. You can find all suitable items here: www.hepco-becker.de/meinbike/moto-guzzi/v9-bobber-2016

Hi, unfortunately we had/have not had much demand for a centre stand when the model was in our development department. The technical realisation of this model is also not really a given. 😞

Hi! Yes, the Alurack is compatible with the Xplorer TC60 :-) We only have developed the C-Bow holder for side luggage, so the Xplorer cases will not fit on them. But if you like to have a aluminium case for the side, we also offer a set for the C-Bow holder. They are called Xcore and you can find them here: www.hepco-becker.de/en/Luggage-systems/Motorbike-cases/C-Bow-Bags/Xcore-C-Bow/ Of course they have a bit less capacity than the Xplorer ones. Best regards!

Hi! It is on our list! But we will probably not get the model into our workshop until the summer. So unfortunately it will be a while yet.

Hi! The C-Bow holder, Protectionpad and the tank ring Basic are also suitable with the GT from 2022. The other parts aren't. Best regards!

Hi! You have to buy it separately, because the basic tank ring is model specific. So you have to check, if we have a tank ring for your model first. With our "My Bike" function in our online shop www.hepco-becker.de/en you can easily check, if there is one available. Just choose the brand and then the model with date of manufacturing and check if there's a tank ring. Best regards!

Hi, I'm sorry. For the CB1000R we only have a C-Bow holder in our range. no side case carrier which is needed for the xplorer side cases.

@@HepcoBeckerEN this is really unfortunate. Thank you for the response!!🤝

I'm sorry we do not have a Sportrack for this model in our range 🫤

Hi! Yes, the Xplorer cases can be used on the Pure version. When using also a top case in combination, they must be removed to open. 😊

⁠@@HepcoBeckerEN​​⁠thanks for your reply ! Your mean is I have to remove the side case from the motorcycle before I want open the top case ?

​@@user-yn1vf8wy1l you have to remove the side case to open it, if you also have mounted a top case. I apologise for the misunderstanding.

@@HepcoBeckerEN Understood ! thanks for your help ! ^___^

Hi! It is here: ruclips.net/video/sFcLRQohs2Y/видео.html

@@HepcoBeckerEN Thanks!

Hi! Ja, 😊 unser Importeur vor Ort ist: SYARIKAT MOTOSIKAL SUNNY 37 Jalan Pahang Setapak 53000 Kuala Lumpur West Malaysia Malaysia Tel. +60 34021 1661 E-Mail: info@sunnycycle.com www.sunnycycle.com/

Hi! Bonjour, voici les instructions de montage de notre arceau de protection moteur. Malheureusement, elle n'est disponible qu'en anglais et en allemand. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/www.hepco-becker.de/document/AmgGY9dbxtrPNzUKG9F1Wg_3D_3D

@@HepcoBeckerDACH Génial, merci beaucoup. Pas de soucis, je comprends l'anglais.😊✌

Hi! Sorry, the skid plate is only possible in combination with our crash bar (SKU 5019539).

Hi! I don't know which city bags you mean. Maybe the Legacy courier bags? This part of the carrier can be attached using the spare part (item no. 700427). However, if you mount this part on another bag that is not designed for this bracket (i.e. not a special Hepco&Becker C-Bow bag / case), we cannot guarantee the safety of the mounted item. Our special C-Bow bags have a reinforced rear panel, which ensures secure mounting on the motorcycle. Best regards

Hi! I'm sorry, we do not have a picture of this model with the Xcore cases 😞

Hi, I'm sorry - the side bags are not big enough for a helmet - therefor we have the Royster Rearbag (the big one) in our range.

Hi! Yes, there is: www.hepco-becker.uk/ from Moto Legend and www.hepco-and-becker-luggage.co.uk/ from Moto-Bins 🙂

Hi! It's the Royster Daypack in grey, this one: www.hepco-becker.de/en/tankbag-royster-daypack-5-5-ltr-black-with-grey-zipper.html 🙂

Hi! The tank bag has water-repellent outer material. A rain cover is not required.