- Видео 28
- Просмотров 231 686
Noordbrook
Германия
Добавлен 28 июл 2018
Noordbrook ist ein erfundenes Wort, dass sich aus den Plattdeutschen Wörtern "Noord" (Norden) und "Brook" (Bruch/Sumpf) zusammensetzt. Der Name entstand zum einen aus der geografischen Lage meiner Heimat, denn wenn man nach Norden geht kommt nur noch Sumpf , bis man in die Elbe fällt.
Andererseits beschreibt es aber einen Gefühlszustand. Es geht darum seine Absichten neu auszurichten, seinen alten Sumpf aus Arroganz und Egoismus zu verlassen und seine Stärken, Fähigkeiten und auch Schwächen für sich zu behalten. Stattdessen verwendet man diese so, dass andere Menschen davon lernen können. Man gibt sein Wissen weiter, ohne etwas dafür zu verlangen. Gleichzeitig lernt man davon viel für sich selbst. Und erwirbt so neue Kenntnisse, die man wiederum verteilt.
Ausprobieren und weitersagen lohnt sich definitiv.
Andererseits beschreibt es aber einen Gefühlszustand. Es geht darum seine Absichten neu auszurichten, seinen alten Sumpf aus Arroganz und Egoismus zu verlassen und seine Stärken, Fähigkeiten und auch Schwächen für sich zu behalten. Stattdessen verwendet man diese so, dass andere Menschen davon lernen können. Man gibt sein Wissen weiter, ohne etwas dafür zu verlangen. Gleichzeitig lernt man davon viel für sich selbst. Und erwirbt so neue Kenntnisse, die man wiederum verteilt.
Ausprobieren und weitersagen lohnt sich definitiv.
Is this PRS worth 4000€? - Guitar Repair, Fret Job
I had this guitar in my shop for maintenance and for doing a proper fret job.
Просмотров: 139
Видео
beautiful PEDALBOARD made of Cherry
Просмотров 161Год назад
When you start playing guitar, you don’t need more than a guitar and an amp. But one day you buy your first pedal. And you fall in love with. Then you get yourself another one. And another one. And another one. All the sudden you end up with half a dozen pedals, laying on the floor. Cables crossing all over the place, with guitarist continuously stumbling over it. Yeah that happened a lot to me...
I built my own SOFTBOXES for filmmaking - Just a DIY PROTOTYPE
Просмотров 43Год назад
I built my own Softboxes for filmmaking. Cause I wasn't sure about what I need and if it will turn out the way, I wanted it to be, this is just the video dokumentation of me designing a PROTOTYPE. Yes there are things I don't like about it. But for now, it works pretty good. So stay tuned to see me building the "real" Softboxes. This is not a guide. Working with electronics is dangerous.
Bring it back to shine - Washburn EA-Series Restauration
Просмотров 519Год назад
I got this 29 years old Washburn EA a few days ago. It was full of dirt and need some serious clean off. But it was worth it!
Can a DIY-KIT BASS be any GOOD? - Let's build a relic bass.
Просмотров 9 тыс.Год назад
I got asked, if a DIY-Kit Bass or Guitar could be an alternative for people who want to build their own instrument, but do not have the time or knowledge to do. So I checked it out and build myself (another) Instrument. Join me on that journey and discuss my conclusion in the comments.
easy BOTTLE DRYING RACK made of Scrap Wood
Просмотров 572Год назад
I made this quick and easy Bottle Drying Rack. It's a low or now cost project made of materials I had laying around. Exept the glueing time it took me less than half an hour. Enjoy.
This is Noordbrook - Trailer
Просмотров 203Год назад
Hey, I am Johannes and I am a maker. And although I am Not a maker by trade, there is not a single day in my life, where I don’t do anything with my own hands. I grew up in a family of makers. My parents had a company that produced handmade wooden toys for children. My dad is a carpenter. So most things I remember from my earliest childhood, is me playing with different types of Wooddust and al...
The Woodshop Build - Vlog 1
Просмотров 32Год назад
I'm so sorry but I'm going to vlog. Just for 3 episiodes. I'm going to build a woodshop and for there is so much stuff going on (and I am running out of time) the vlog style is the only way to keep you updated. More content is coming soon and it will be with a better quality, I promise ;)
Bienenweide: Buchsbaum 2020 - Noordbrook
Просмотров 1014 года назад
Der Buchsbaum blüht. Trotz der geringen Temperaturen sammeln die Bienen fleißig Nektar und Pollen. www.noordbrook.de
Bienen Februar 2020 - Noordbrook
Просмотров 5414 года назад
Frühlingsgefühle bei den Bienen. Einfach genießen... Weitere Informationen: www.noordbrook.de
Bücherragel aus Buchenholz mit Schwalbenschwanzverbindung
Просмотров 1634 года назад
Ich habe ein Bücherregal aus massiver Buche gebaut. Natürlich mit Schwalbenschwanzverbindungen. Viel Spaß beim Nachbauen ;) * Zu Beginn leidet die Bildqualität leider unter falschem Weißabgleich, Sorry. Weitere Informationen: www.noordbrook.de
Antique Hand Powered Grinder - Works Amazing!
Просмотров 3545 лет назад
Quite a time ago this hand powered Grinder was given to me. It's in an awesome condition. The only thing that needed some work was the gear system. So let's do it! Make her grind again! More informations: www.noordbrook.de
I need Your Help - Restoration of my old Crosscut Saw
Просмотров 685 лет назад
I need Your Help - Restoration of my old Crosscut Saw
One Bolt to make it work - Mitre Saw Stand
Просмотров 1,5 тыс.5 лет назад
One Bolt to make it work - Mitre Saw Stand
Precision Please - Adjusting a Makita LS1018L
Просмотров 104 тыс.5 лет назад
Precision Please - Adjusting a Makita LS1018L
Präzision - Einstellen einer Makita LS1018L
Просмотров 77 тыс.5 лет назад
Präzision - Einstellen einer Makita LS1018L
Being Romantic - Building a wineholder for two
Просмотров 386 лет назад
Being Romantic - Building a wineholder for two
Vielen Dank für das sehr angenehm zu schauende Video.
This may be 5 years old but its still a great help to some of us...eg me!..... thanks👍
What was that product you used on the body and the pickguard? Great job!!!
Auch nach 5 Jahren immer noch super, wenn man alles checken und einstellen muss!
Why "relic"?
Turn the music OFF when you are talking.
Thanks for the time and effort you’ve put into this video! It was very helpful to me 👍 @makita Give this guy some credit
No playing sample? How disappointing.
Just a small tip: don't check the bow of the jack in flat possible, it needs to be checked in playing position :)
What a beautiful restoration. The work is incredible but it was worth doing it to this gem of a guitar. Congratulations
Thanks. It definently was
Subscribing!
Nice! I've tried a few kits I bought from Amazon, mostly as mod platforms. I just kept the body and made all custom basses for less than 1k USD each.
Sounds great :) I should finally start to modify mine
Just a note that if you, to use a random example, are cutting a too-small piece of oak and it gets violently jammed into the saw you must redo all of these adjustments 🙄
Tnx a lot. It was just what I needed and now I can do straight cuts again.
Super, Dankeschön, gut erklärt und gezeigt, Beste Grüße
I've built a bass from a Thomann (Harley Benton) Pbass kit for a good friend, and I was (am) absolutely surprised at the feel and sustain! The only thing I did replace immediately, was the pickup, as I had an old but very nice fat & juicy pickup gathering dust in a drawer... It sounds amazing, even borrowed it to use it on a recording! 😎👍 I'm definitely going to build another one this summer, purely for myself this time - got an old active EMG P pickup with controls too... It's going to be a scorcher.
good video
Danke, sehr gut erklärt in einer ruhigen Art 😊👍
Danke!
Flat-sawn necks are fine if the wood is properly dried out. However, a quarter-sawn laminated neck with a dual action truss rod and reinforcement bars will of course always be more stable
Quarter-sawn is a rip-off. I've seen big chunky D profile quartersawn necks warping and I've seen a 14 years old never set never trussrod engaged Squier neck, flat sawn and thin C profile who had no issues.
각도조정법 감사합니다
Super Video !!! Herzlichen Dank für die Bemühung😊
Promo>SM
Denkt immer daran beim Sägen den Stecker zu ziehen!!!!
I would wait until all strings are tuned before setting intonation because the neck usually flexes a bit under tension. Nice guitar!
That's what I usually do. Thanks for the hint. I hope I'll remember to mention that in the next video
Great video for education
Wow, really amazing video. One of my favorite guitars. 👍
That's great to hear. I've shot some more Guitar Repair/Clean Up Videos. Coming out soon. Would You be interested in watching me talking a little bit more in depth about this instrument? E.g. What Woods were used, how it sounds, looking at the wiring?
@noordbrook Sure, that would be great.
Cool. I will give my very best to get the video done as soon as possible
I don’t seem to be able to rewind ( ie go back ) on you tube any more ? Anyone else have this prob ..
Do you watch via Smartphone/Tablet or PC/Mac?
Sehr gutes Video und fachlich einwandfrei.
Freut mich, danke!
@@noordbrook Es wird erzählt, aber dieses Video ist richtig gut.
Very helpful thank you
Just found this and my saw was way out so thanks
Thanks for the help.
Yes a good video, I took mine a bit further and spend a couple of hours pulling it apart and deburring all machined surfaces/edges with my needle files and a fine stone. Now all moving parts are so smooth, it feels like a $2000 saw, well worth the effort.
That's a brilliant idea. Should have done that to mine. But I decided to sell it in November last year.
Hast du die 5 schnitt Methode gemacht um den rechten Winkel zu kontrollieren? Bin am überlegen mir das Gerät diese Woche zu kaufen und eine exakter rechter Winkel ist essenziell.
Der Winkel stimmt definitiv. Mich hat schlussendlich aber die mangelnde Absaugung und die große Fläche, die für die Arbeit am Werkzeug benötigt wird, dazu bewogen, sie zu verkaufen.
@@noordbrook Und für welches neue Gerät hast du dich entschieden?
Merci pour la clarté des explications et les rappels à la prudence...👍
Thank you. That was a truly informative and helpful video. We'll explained. To the point. And I thought you repeating the need to unplug was seriously spot on. Those blades are beasts. I really appreciate your effort. It will come in handy when I go to adjust mine. Well done 👍
Wow. Muchas gracias tu video ha sido de gran ayuda. Tienes un like, me suscribo y tu video guardado en mi lista de favoritos.
Nice. Thanks from 🇨🇦
Winkel zwischen d. Zähne anlegen!
Beim laser umgekehrt, aber sonst sehr gut! Danke für das Video 🥴
73K views... Seems like I'm not the only one struggling with adjusting my LS1018L. Thanks a lot for the instructions !!!
....und auch wenn es etwas nervt: Sicherheit geht vor, also Stecker ziehen! Nee im ernst:Gut gemacht! DANKE
Wenn die Säge jetzt gut eingestellt ist, empfehle ich das Klavier in Stücke zu sägen. Aber vorher den Stecker einstecken. Trotz der störenden Musik, sehr gute Erklärung. Danke.
Vielen Dank
Thank you for this great tutorial. I find that if i make cuts with waste on the right side of the blade they are usually square but if i put waste on the left side they are not. I'm not sure what to do in this situation since it's all one piece and they cannot be adjusted individually.
Cost of machine pls
Kannst du mir bitte sagen was in der Dose ist wo du dein stecheisen vor Gebrauch drüber ziehst ?
Ganz einfach nen alter Socken und Kamelienöl. Geht auch mit anderem Öl, allerdings gibt es Ölsorten, die zur Selbstentzündung neigen (Leinöl). Aber mit Kamelienöl ist es wunderbar.
Thanks a lot for your comprhensive video. I was wondering if you edited one about troubleshooting such as the jammed press button to release the bevel cut angle or the octogonal key in the back that doesn't tighten the chosen angle.
Good explanation (even though English is not his first language) from a gracious man - thank you.
Super Video, vielen Dank
Excellent video. Thanks very much. I'm just about to buy this model (upgrading from my 216mm model). You're going to save me a lot of time setting up. Cheers. Tony