Видео

Hey, I got that same screw driver set from Temu lol

What lift do you have ?

Thanks for sharing! Just replaced the fluid today. I think it went well. One tip I saw on RUclips that helped to have less mess was to just break loose the fill plug (without taking it out) and then to drain the fluid from the drain plug. It's interesting that the old fluid is almost orange-red color while the new fluid is green. Probably because of the iron or other micro-particles in the fluid. I expected my old fluid to be super dark, but it was the same color as your's. Changed mine at 105k miles, I'm pretty sure it was the first time for this CVT. I'm going to drain and fill again in a week or so since it only drained about 4 quarts first time which is about 30% of the old fluid.

It's crazy that OEM gaskets are so expensive for such simple things. That's like $20-$30 for front and rear differentials. Thanks for the detailed video!

Thanks. Very nice video.

The bugs screamed louder than you bro please speak louder or better mic

Dad made me do this job and you helped me every step of the way! I love you car jokic

This is awesome and gives me confidence. Thank you. Can you say how many hours it took to for each side. I would estimate 2.5 hours for each side. Am I close? Any reason you did not change out the ignition coils as long as you were "in the neighborhood". Does the oil harm/degrade the ignition coils. Thanks for the tip on the CD/book. This is a great excuse to buy a $75 disc player I need to read a $15 book. HA! Thanks

Good detailed video! Why did you want to upgrade the factory camera?

Thanks for the video

This was a very good video. I am trying to decide if I want to do this. TW do you know where the Tire Pressure Module is located? The manual shows a general location.

I need one of these please 😮

Very good job I really like, how long take to finish both?? Also just got new headlights & thinking do the same thing of yours.

Very good job I really like, how long take to finish both??

Hey bro can you send me the link of the one you got on eBay ? And how was it hold up? I’m thinking of getting one for my car

What size rench is that

I love that car lift!!!!

He talk not clear, should open his mouth to talk

My passenger side actuator is going bad.

It's been almost a year since this video. How's the battery condition now? still running good? some of the cells of my 2007 Hybrid battery died 2 weeks ago and im thinking about getting a new battery.

One B of a job,

nice job video ing and working i have recently replaced rear rotors and pads and half the new caliper. i used the old brake shoes. im now regretting it

Cost as of 8/2024 for actuator for driver side at oreily is almost 200. Passenger actuator is half the cost and they can not interchange

Please show how the part fits in there so you don't damage the arm that controls the actuactor

Thank you so much. You helped a lot and I really appreciate your video.

Very helpful! Great video!

Great video. Your steady, calm technique gives one confidence to also attempt this job. I do have one question. Where did you get the car ramp? Looks safe and great to get under a car and work on it.

Mine is coming this week. Did it come with some adhesive sleeves free to dry because they’re so expensive to buy and I would rather try them before I have to purchase

Great video and detail, was going to take it to the shop but after watching this you gave me the confidence to try. Thanks alot!

Where could I get that lift at?

Big help thank you!🫡

Awesome thanks

for transmission flush and drain for 2013 g37x infiniti awd how many q?

Great video with explanation. My parking lights would randomly stay on without my knowledge. A bump in the road could trigger them. Removed the switch but was unable to remove the circuit board with the ease you showed. I was afraid I’d break the plastic housing. So instead, I sprayed contact cleaner inside, shook it a bit while cycling switch on-n-off. After reinstalling switch and turning it on, I pronounced fixed! Thanks to your video👍

Hello! I've purchased the same car for my wife (good for snow in new jersey) with 101k miles and I will take it to the mechanic to do the flush of the transmission fluid. You don't replace a filter for this process? Thank you!

It looks like it is not possible to use the DeWalt chainsaw 12 inch bar on the pole saw. The pole saw has a 3/8 pitch , and gauge of 0.043 inch ( 1.1 mm ). Your DeWalt chainsaw uses a 3/8 pitch, 0.050 gauge ( 1.3 mm ) chain. Oregon make a 12 inch bar with 3/8 pitch with gauge 0.043 inch. It would be interesting to see the pole saw with a 12 inch bar. Maybe the 12 inch Stihl 3/8 0.043 Pico chain / bar would work, not sure if the bar would fit. Those chains cut smooth and fast. I don't think it is correct to call a bar length change an upgrade. Sometimes it is better to have a small bar, for example, when limbing small branches, or for tree climbing. The saw/bar length is just a configuration. The bigger is better is a modern day disease that is ridiculous when you think about it.

Thank you sir! With your help I changed my first alternator!

Very nicely explained with clearly explained details. Very well done. Thank you very much!

How long it last ??

Thank you

good vid man

T480 vs T470s vs T480s. Which is the best??

just spend the 400 and replace them by next year it will be back to yellow

this adapter never worked on a 2010 .6.1 dodge challenger with a po430 code. i actually took it off 4 different times and gradually increased the hole size in this adapter junk, the light in my instrument panel returned each time .. i know 100 percent my cat is the issue... this did nothing for me ty

Awesome video. What are the symptoms of a bad wheel hub ?

nice job 👏

Good video. Thanks!

Is that not the washer stuck to the diff casing?

Hello I have a q60 luxe and after changing my rack the steering became stiff is the rack bad or needs programming?

just what is needed on my 2010 Ridgeline. thank you!