Видео

Works if you follow exactly screen by screen. Super slow loading, be patient. Don’t add configure to IPv6

Excellent thanks for sharing the detailed explanation.. keep going..

Thanks for doing this one guys. I am about to transplant a pair of 6144s from an R640 to an HP Z6 G4. This was very helpful.

What is the white cable you put in at the end?

Amazing video , appreciate it :)

The only way I could get the server to see the USB file was to use a very old 1GB USB drive, FAT32 format plugged into the rear USB with keyboard in front USB

I noticed after putting GPU on the riser card/PCI slot of my hp dl380 gen9, is not showing on my windows server operating system, also when I went ahead in installing other versions of windows server operating system, the GPU is also not showing on it, what could be the solution to this ?

Dude your channal rocks.

What gpu is best for the r430. I was thinking about a Tesla p4

i cant believe that people still made this type of content in 2024 this saved my life

Do I need to add drives to JBOD first before adding them to RAID?

Thank you server jesus

You sir are an example of what every turorial and instructons should be. I bought almost every pci-e nvme card with no success to learn here that the Supermicros contain Dell firmware. Wish this was not the case tbh. Ty kindly

I'm thinking of getting a R940 (not the xa version), and I was wondering if it's possible to adjust the fan curve. I'm currently using three Rx20's and Rx30's, and I love how I can manually set the fans to 10%. Is something like this possible with R940?

This video is a gem!! THANKS SO MUCH!!

How's that NVME u.2 SSD video coming? I've been playing NVME roulette in my R640 10 bay. New enterprise drives pop off into diagnostic mode while cheap M.2 PCIe to 2.5" U.2 adapters seem to work fine. 🤔

Great video thank you so much. I had a question I have an SC200 connected to my R730XD. I cannot get the hard drives that are installed in the SC200 to show up in ESXI in order to add them to DrivePool in my Windows VM. Is there a reason why the SC200 drives do not show up in ESXI so I can add them as Raw Disks like I did with all the drives in my R730XD?

Question: Dell PowerEdge R720xd: I followed directions given here to download and install MS Windows Server 2016. The installation goes fine until the point where disk drives are listed to receive the installation. The server has six disk refurbished drives but none show up so the installation stalls. Server BIOS was updated; hardware diagnostics were run and ok. Any suggestions as to why the disk drives don’t appear during the installation?

The IP address settings remain greyed out after setting DHCP to OFF

Ah yes, the perfect server for a dentist office. The tooth-hurty.

Thanks for the video. I'm looking for the number of U between the R650's. It's not in Dells documentation and not mentioned in your video, even though the servers shown are spaced at 1U. The vents for the R650 are on the top and visible in the video, but not referenced.

My back still hurts hahaha

I get all the way to the password portion and hit enter I end up getting the error "Unsupported Device Warning" I am just trying to re0-install ESXI since there was an error and I cannot get into my system no more. So not sure what to do since I figured I could just reinstall new and overwrite data. But I get that unsupported error.

Seeing the presenter handling those heavy parts right over the delicate LGA pins gave me some stress, but the video was definitely instructive, thanks!

As a medical, I have never heard of daughter card

Does this raid controller require a battery?

Hey. Are those blue jackets to protect clothing (while handling heavy equipment) or to provide ESD protection?

Wait a minute, was that ram configuration really correct? I am running in a different config on my r430, and all my ram is still recognized and working

Hi we could do with a video on how to assign interfaces on the OS. We're the Dell240 as for RSA in appliance mode and never got the two NICs working.

Hello, do you always need to install a RAID card in the Proliant DL360 Gen11 server?

Thank you very much, it helped a lot.

👍👍👍👍

i bought firepro 7156x2 gpu and want to give a try to install on this server but im little confuesd about the power source will it work if i use extation power psu or drop the idea

I also want to put some big ISO file into the USB drive. so If I select NTFS when i create the bootable USB via Rufus. Will that be okay ?

I visit your youtube channel Your RUclips video contents are very nice.But due to some problem your video views and subscribers don't increase.

Rip my outlet

Cool

Can u ship to Australia?

Can I install 2933mhz memory? I know that work only a 2400mhz .. but it works?

Thanks for this video it’s just the job ❤

I need to know how to disable s110 raid on dell poweredge r720 please

No, the Dell Precision T7910 does not require a separate SAS RAID controller as it comes with an integrated SAS RAID controller, allowing you to use SAS drives and configure RAID without a dedicated card; however, for advanced RAID features like RAID 5 or 6, you may need to add a separate PCIe RAID controller card depending on your configuration. Key points about the T7910 and RAID: Integrated SAS controller: The T7910 has a built-in SAS controller that supports basic RAID configurations. Optional RAID card: If you need more advanced RAID capabilities, you can add a dedicated PCIe RAID controller card. SATA support: The integrated controller can also handle SATA drives.

I need one

Just a note for those who may have bought their server from techmikeny. He updated all the drivers before sending it my way. do the verification first before even worrying about this step. check for the current versions first.

Did I hear correctly 7.68tb per drive bay? So if you really wanted to, you could have nearly 62tb of storage?

I have two 1rx8 16 GB 2400 and two 2rx8 16 GB 2400. How do you know which slot to insert.

FYI - This method requires a newer iDRAC firmware or the digital signatures will not work and won't update. You have to manually update to an intermediate older version that works with the old signature methods, then you can update to a new version that works with the new signature methods. I got my BIOS and iDRAC and other firmware updated by manually updating the BIOS using the .EFI file from Dell's download page and using the Boot Menu option to pull it from a USB Stick. I then updated my iDRAC to an intermediate version (2.70.70.70) using the 32-bit EXE from Dell's site uploaded via the iDRAC Update and Rollback firmware update page. I was really confused because I wouldn't have expected the Windows EXE to be the file to upload via this interface. Then I was able to update to 2.86.86.86 using the EXE, which is the latest as of January 2025. At some point, Dell started requiring SHA-256 signatures instead of SHA-1 signatures, and older iDRAC firmware can't deal with the new versions without first going to a version like 2.70.70.70 before going all the way to 2.86.86.86. For reference, I was originally on 2.63.60.61 when I acquired my server.

you need to install a fifth fan in this dual cpu setup.

But you can use U.2 NVMe's in R730xd, there is the same PCIe card as in R630 and then you get the last 4 positions (out of 24) in backplane to support U.2 NVMe.

got 512 gb mem upgrade from you guys, for my r720, arrived yesterday, just finished installing, server in boot process, excited.... lol... so far so good... Thank you Cloud Ninja's.