- Видео 51
- Просмотров 103 988
Mr jhamm
Германия
Добавлен 30 мар 2017
Hey,
welcome to my private video channel.
Here I only publish films that I have recorded myself.
The models presented are exclusively for my hobby and my interest in technology.
welcome to my private video channel.
Here I only publish films that I have recorded myself.
The models presented are exclusively for my hobby and my interest in technology.
12-ton 6×4 M20 Diamond T Model 981 Truck - Part III - New Gearbox
12-ton 6×4 M20 Diamond T Model 981 Truck - Part III - New Gearbox
Просмотров: 264
Видео
12-ton 6×4 M20 Diamond T Model 981 Truck - Part II
Просмотров 29414 дней назад
12-ton 6×4 M20 Diamond T Model 981 Truck Finished. ESC Hobbywing 1625 with 6V Mini 25D DC Motor 180 RPM Sound by Benedini Soundmodule Winch is funktional TX is FrSky X20Pro RX is FrSky TW-R6
12-ton 6×4 M20 Diamond T Model 981 Truck - Part I
Просмотров 59921 день назад
12-ton 6×4 M20 Diamond T Model 981 Truck I drew the truck with Fusion360 and printed it in PETG ESC Hobbywing 1625 with 6V Mini 25D DC Motor 180 RPM Sound by Benedini Soundmodule Winch is funktional TX is FrSky X20Pro RX is FrSky TW-R6
Tongde Churchill Mk.VII with Beier SFR-1-HL
Просмотров 7595 месяцев назад
Tongde Churchill Mk.VII with Beier SFR-1-HL
Conqueror FV214 - first drive at Backyard
Просмотров 3545 месяцев назад
The model was created entirely using 3D printing. The STL files are from rc3dtanks - you can get them at Cults Some parts have been redrawn to match the original. Gearboxes are HengLong 7:1 with short axles (Tiger; Pz III; Pz IV) Electronics are a Beier SFR-1-D Remote control FrSky X20Pro There is a build report about the model in the RC Tank Warfare Forum: www.rctankwarfare.co.uk/forums/viewto...
Tongde Churchill Mk.VII - first drive at backyard
Просмотров 1 тыс.6 месяцев назад
Tongde Churchill Mk.VII - first drive at backyard
Centurion FV 4005 - Stage II - Prototype
Просмотров 6427 месяцев назад
Based on Tamiya Centurion MK III. Turret is 3d-printed with Bambu Lab X1C Electronic is Beier USMRC-3 Special transmission/gearbox with brushless 540 motors
BÜSSING NAG 4500 - 4,5to LKW - 1942/43
Просмотров 1598 месяцев назад
Control: Beier SFR-1 Reciever: FrSky Archer M Drive system: four-wheel drive with Veroma 3-speed gearbox LRP truck puller
Oliver Cletrac RC-Tractor with Dozerblade
Просмотров 1,3 тыс.8 месяцев назад
Oliver Cletrac RC-Tractor with Dozerblade
Oliver Cletrac RC-Tractor as Dozer
Просмотров 87810 месяцев назад
The mechanism to raising/lowering the dozer blade is not yet finished.
Oliver Cletrac RC-Tractor
Просмотров 51011 месяцев назад
3D printed on a Bambulab X1C with PETG filament. Electronic is ripped from Tongde Bradley... ;-) The Print-files from Thingiverse: 4875535 With Fusion360 I have drawn wider and flat track-links you get them on Thingiverse: 6310731 Have Fun and thanks for watching.
Tongde M2 Bradley - first drive at Backyard
Просмотров 9 тыс.Год назад
This is the new Tongde M2A2 Bradley. Electronic: Beier SFR-1-D TX - RX: FrSky X20Pro TW R
Tongde M2 Bradley additional function: opening and closing the tailgate
Просмотров 2,2 тыс.Год назад
The new Tongde M2 Bradley Electronic: Beier SFR-1-D TX - RX: FrSky X20Pro TW R6 additional function: opening and closing the tailgate by Servo
StuG III Ausf. A - first drive at Backyard
Просмотров 1,4 тыс.Год назад
StuG III Ausf. A - first drive at Backyard
Sd.Kfz.9 FAMO - first drive at Backyard
Просмотров 1,3 тыс.Год назад
Sd.Kfz.9 FAMO - first drive at Backyard
StuG IV Late - first drive at Backyard
Просмотров 49 тыс.Год назад
StuG IV Late - first drive at Backyard
sWS - der schwere Wehrmachtsschlepper
Просмотров 7992 года назад
sWS - der schwere Wehrmachtsschlepper
The "Blitz" got a new quiet gearbox
Просмотров 1,2 тыс.2 года назад
The "Blitz" got a new quiet gearbox
Cruiser Tank Mk. VIII A27M Cromwell Mk. IV - 22 Armoured Brigade
Просмотров 2363 года назад
Cruiser Tank Mk. VIII A27M Cromwell Mk. IV - 22 Armoured Brigade
Cruiser Tank Mk. VIII A27M Cromwell Mk. IV from Hooben
Просмотров 1,4 тыс.3 года назад
Cruiser Tank Mk. VIII A27M Cromwell Mk. IV from Hooben
HengLong T-90 with Beier SFR-1-D Lighting Features
Просмотров 3963 года назад
HengLong T-90 with Beier SFR-1-D Lighting Features
I think I saw you on the rc tank forums, nice beast btw
Nice! What board inside?
DIY OpenPanzer TCB
@@mrjhamm4208 thanks, great sounds
👍
congrats on a fine runner . Strong and smooth
Hi there I got mine and I’ve change the tracks, idle wheels, sprockets and road wheels to metal. It still slip off from both side Sprockets, does yours have that problem?
No problems, running well.
Moin, super gemacht, gefällt 🙂 Freu mich den beim nächsten mal live zu sehen. Grüße
What stick do I need to push to make the tow missile up and down and that rear door? Thanks
I don´t use the Tongde MFU... therefor i can´t answer your question.
Although I have seen close-ups elsewhere online, I enjoy the sound. There seems to be a bit of a knock in the engine that just seems so realistic: a tappet or a touch of pre-ignition or who knows. But the sound is so evocative of the engines of the mid-twentieth century. Well done.
Klasse Modell , das ist die Beier SFR 1 D ? man könnte auch an die HL nen 2 Fahrregler an hängen oder
Nö, kann man nicht....
Barvo sir main board is original board? Rear door servo in CH1?
on the original board is only one port for servo free
nice one 😊
SECOND TO NONE
What did you use for the rear door to open and close?
Please read the comments...
Read the comments and have a micro servo to open and close but what servo horn did you use as well as what type of connection rod.
@@timgreen9049 I used the servo horn that was supplied with the servo. The connection to the tailgate was made from brass wire..
At last!! A CORRECTLY-recoiling main gun fit!!! So many times I've had a laff at the way every other tank leaps backwards ten feet on firing! Well done, Haya!
I chased an Armortek 1/6 Stug 3, but they're ridiculously pricey, not to mention the taxes and shipping to Europe For now I'm settling to restore a banged up 1/16 I found second hand 😂, fun build I gotta say especially with the Eastern tracks and a powerful airsoft gun I'm putting in it 1/16 it's a fun and versatile scale I admit
Excellent
Each time my TOW is fired only the outer LED would light up. The inner LED would never light up. Are there other separate buttons combination to fire the second TOW? Also, my small machine gun doesn't have an LED flashing when firing. Did you have to add a light to yours?
I change the second LED at the TOW and connect with the Beier SFR-1-D Board. The same with the small machine gun.
@@mrjhamm4208 Thank you for your response.
PS. Try another set of sounds, this one sounds a bit artificial and Beier has many better ones
This is the original sound of a Churchill Mk.IV Beier has no matching sounds, how do you come to this statement? And certainly not better ones
@@mrjhamm4208 Yes, of course, but sometimes "alternative" sounds sound better. For example, in the case of my Sherman M4A3, the Beier sounds for the M26 are much better. (which used almost the same engine). Either way, good job, we finally have Churchill :)
An average British remote control tank.
British Grenadiers intensifies
Good to ser that it works well with Beier. Can't wait for mine...
Is there a specific servo that is fully compatible with the controller board?
I just took an old one from the craft box...
The instructions tell you how to operate the rear door but not identifying which port of the TD-2.0 board to connect the servo to. Do you know which one?
There is only one free servo port, the other is used by the servo for the TOW
@@mrjhamm4208 Yeah, immediately after posting my question, I had another look at the controller and realized that there is no other servo port except one next to one use d for TOW, so it had to be that last servo port. Tested with a micro servo and it worked. Thanks for your answer.
From where did you buy it?? it's amazing
The STL-Files available at rc3dtanks.site/detail.html#conqueror
Running well , but only 3km/h.
If the British had ever thought to slope the armor on the Churchill it would have been probably been the best tank of that era.
Really nice! The fact that it can rotate its turret is particularly cool
U still like it and how is it holding up?
hast Klasse gemacht!
Danke.
Jap großer. Das Moos ist fast Schale. Hast das Prachtstück direkt von den Pekinesen oder Rctank mit Wartezeit? Läuft gut die Kettenkröte.
That’s epic
rip 666 USD
who pays so much money for this model?
That's a cool tractor
1/35 RC mit sound! Klasse!!!
nix 1:35 der ist 1:16
Were can i buy this one to add to my collection 😊
www.dklmrc.com/
M2 Bradley🇺🇸
Promo-SM 💘
Anyone know where I could get just the metal tracks and drive sprockets for this? Thanks!
Look at www.dklmrc.com/
bushmaster sound is tongde original? or your custom?
Custom.
I heard these are very problematic and difficult to make operational, for the price they're asking you'd expect less trouble
it's all made of zinc die-cast. Unfortunately, there is a lot of rework. This is a kit for professionals with appropriate machinery
@mrjhamm4208 that sounds like a nightmare, I've seen some treads of people wrestling with this build, but yeah with proper machinery and skill you get there eventually, but for the others will be tears and lamentations 😄
How did you make the rear door open?
with a servo... ;-)
👌👌
Sehr sehr schön wirklich toll😮😊
Ich find den Sound der Ketten sehr gut meine Meinung hör ich gern wenss Ratert😊
Great video. How did you get the TOW launcher to go completely 90 degree ? I notice that you can either make it fold property or open properly but not enough travel to do both from the servo setup.
In the servo settings menu of sfr-1-d select extended servo travels ...
@@mrjhamm4208 This is from the OEM MFU ? I have switched it over to IBU2.
@@Cheung178 BEIER SFR-1-D www.beier-electronic.de/modellbau/produkte/sfr-1-d/sfr-1-d.php?sprache=gb
Is this the Tongde one ? It looks cool
Nice video and thank you. What did you do about the plastic part that goes underneath the tub missile system that won't allow it that won't allow it to fold back?
I modified the part, cut off the wavy part and filed the part itself flatter.
Is that a standard feature?
the function ist implemented in the electronic - but the mechanical part is to do by your self
Can you explain how the rear door operates so it can be duplicated?
@@chuckschipper7731 Take a servo and glue it sideways inside the tank. Bend a suitable connecting rod and attach it to the bottom of the tailgate and to the servo. The control of the servo is explained in the Tongde manual.
Where can you buy this?
www.dklmrc.com/product/td-rtr-rc-m2a2-ifv
Klasse Sound ! schönes Modell