Видео

I wanted to show the reason these motors are way cheaper. I don’t say it’s the best comparison, but I’m interested in your opinion. I will make another motor review next week and I would like to know your point of view.

hello, try the same with the case screws lose a bit around the buttons. If you didn’t got the spacers right, this might jam the buttons. If you have this issue add one more spacer between the front side of the case and the back side and don’t tight the screw so hard to allow the button to pop back after pressing it.

@@GoeFPV thinked it was that too but I press the bitton without the back case and it's the same..

this is strange, are you sure you don’t have the front screen turned off? try to connect or turn on the GoPro remotely from GoPro Quick app, otherwise I would recheck all the connections.

Let us know if you figure it out and what was the problem. 🙏

@@GoeFPV I'm going to try that thank you, the connections are good I checked them several times, when I press record some time later it's as if the go pro was no longer powered on then it turns back on as if nothing had happened

do you mean for TanQ 1?

@@GoeFPV the bumper to protect the camera you printed. The each do 1 camera angle. So I printed the 15 degree. That’s what I got at.

Aaa, no, the first one which did not fit was an adjustable one, but it was not compatible with TanQ 2 frame. So in the end I’ve printed a 30 degree one. I red “angel” not “angle” and I was confused 😂😅

@@GoeFPV I fixed my spelling. Autocorrect chose angel the first time.

don’t worry ✌️

Hello there my friend, thanks for tuning in 🔥

@GoeFPV Greetings. Good luck on RUclips! And have a nice day ✌️

Good luck as well 🍀

Thank you brother 🙏🚀 I hope you’ve enjoyed it.

Hello, thank you very much. I encourage you to build one. If you need support I would be glad to help. The propellers were first installed at the field before the first flight. I did not installed them in the build because it recommended to configure the motors position and direction without props. Let me know if I got your question. 🙌

@GoeFPV Thanks for your reply. I meant that the flight video feed is without the props visible. Is it the o3 DVR?

@@danyfpv aah ok, yes. It’s DJI O3 footage and stabilized in GyroFlow, so that’s why the original video is cropped a bit. But if you look closer the props are visible in the corners most of the time.

It’s inevitable with a true X or a Squashed X frame. To get rid of the props you either have to use a top mounted camera or a dead-cat frame.

Let’s spread the love 🚀✌️

Thank you, I hope you’ve enjoyed it 🙌

I'm glad you like it

A question I have Tranis Q x7 ban this do long-range and how? Do I have to buy a module?

@@sh3llbac I don’t recommend FrSky receivers for long range. You can add a micro CRSF module, but you will need a mod. Check this video -> ruclips.net/video/mHfQe05XJn8/видео.htmlsi=kyUPBIlbjl68T-1B

@@GoeFPV Ok Thanks I think the TBS Tango 2 will be my choose now.

@sh3llbac I think it’s a better choice ✌️

this was from the O3 air unit

I was using Xing2 all the time, but I don’t feel any arguable difference. I think these are good motors, other than the lower end materials used in some places. I would give them a spin ✌️.

I will go first. I’ve spent around 800-1000$ in ~ two years 😳

Bought 4 rcinpower wasp major v2s for my first build for $27.99 each, just smashed my first motor! Wish me luck

That’s exactly my concern. Is it worth paying almost triple for these high end motors?

I bought EMAX 2205 2300Kv motors, $15 for a pack of 4.

Wow 🤯. These EMAX are 3-4S motors, but where did you find them so cheap?

I think you should really give them a try. I like these motors and I don’t see why you consider I risked the O3. Use my referral link and code “GOEFPV10” for an extra 10% discount and let me know your experience after testing them ✌️.

​@@GoeFPVthe discount code does not work, is it just for some countries? Just tried it, code unavailable, same with an other code I tried today

@@mawi435 this is a problem, it should work for all products and countries. Thanks for letting me know. I will keep you updated. I check it right now.

@@mawi435 It does not work for me either, I wrote them and I am waiting an answer. Thanks for letting me know. I feel so bad for this :(.

@@mawi435 Hi, so I checked and it looks like the discount code does not work for Flash Sale products. So you can still use the code for already discounted products, but not for those in flash sale. Sorry for the confusion. I was not informed well from the beginning.

Just do it. It’s a lot of fun 🤩. I am not that good, far from crazy good 😂.

What do you mean? I want to know more 😅.

@@GoeFPV meps was stealing peoples videos cliping small parts of those videos and claiming them as their own ask other creators no one will work with them or shill their products because of this

@@rainsquadfpv Yes brother, this is the agreement with them, that I share the content with their products. It’s not stealing if I provide them the video. For other situations I can’t know for sure, but I have agreed to share my content with them. But the review is honest and there was no misleading conditions related to the products. I will never accept something like that.

@@GoeFPV brother we've seen the contract form meps sends. You're not the first, and definetely not the trusted guy, so just don't.

I’ve investigated what happened last year. I can assure you that I will publicly show on my next MEPS video the “contract” which is just an email and no strange clauses. Since I’ve started my collaboration with them I’ve had a very good experience and they really learned from their mistakes. I discussed with their marketing manager and asked questions. I was pleased by their honesty of the sh***y things happened in the past and there shouldn’t be the case anymore. Once I will be forced by any means to create a content in an un legitimate way I will end the collaboration. My audience is my number 1 priority, this is why I started this channel.

Always happy to be helpful 🙏

I am happy it helped 🙏

I will get you with me next time 🚀

💪🏼 enjoy!

No, only goggles 2 have removable antennas.

Thank you 🙏

Thank you!

Yes 😂 she did 😅

Yes ☺️

I didn’t had the chance to test it. I will do it as soon as I get my hands on it🔥. Thanks for sharing this info.

It’s smaller and under 250, cheaper and most important for me it’s able to shoot vertical.

Actually not, but you can decide by yourself after watching the video. Let me know if I missed any important point ✌️

Yeah, tell me about it 😂 thx 🙏

Thank you, goodbye! ✌️ :))

No, this LEDs are powered directly by the PWM of the motors. You can’t power them up from a separate source. This is how they are designed.

Thank you mate 🙌

Thanks! 🙌

thank you 🙏

I am not in the position to give this kind of advices, but I’ve performed an authorized flight in coordination with the media team and the law enforcement representatives. Personally I applied all the means to mitigate the risks involved. The UAV rules are sometimes interpretable so I would leave for everyone to take their own decisions.

⁠@@GoeFPVsadly rhe rules are not interpretibal

@@Kannstdudirnichtausdenken88 this is exactly why I don’t want to approach this subject. There are to many opinions and there are already channel which are discussing this topic in depth. More over every country has some specific rules on top.

Thank you mate! 🤩

yes

With those balloons bouncing around uncontrollably? Yes.

I loved it 😍

Hello, you need goggles and I recommend Goggles 2 from DJI if you get an O3 version drone. Also a controller compatible with the chosen receiver (ELRS / Crossfire). I recommend crossfire and a Tango 2 controller or Tango 2 Pro. Also batteries 4S 700-800mAh under 70 grams and a charger. Check out the HOTA chargers. You have some links also in the description for some products ✌️.

indeed, also with no color grading it’s the same.. 🤯

the truth 😂😂

Aka. DJI Avata 2 😂

🙏

💸💸